10MB800FT delivers top-notch midbass punch and clean vocal clarity at a high level output with low distortion and extended midbass response.

Optimized for use in compact enclosures, this midbass speaker provides a smooth vocal response with great output from 500 Hz to 1500 Hz and useful response up to 6,500 Hz, making it a great choice for larger 2 and 3 way systems.

• 2.5″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 Ohm
• Ventilated voice coil gap reduces power compression
• High Xmax 10” Loudspeaker for more mid bass output
• 800 watts continuous program power rating makes the high acoustical output
• Excellent performance in 2-way or 3-way systems

To get superior fidelity, the special composite cone is built with non-pressed paper for a reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.

The Perfect speaker for TUKUTEO® sound.

The high sensitivity rating of 99 dB 1W/1M which makes it capable of generating a lot of output! This 10″ is a great midbass option for pro audio systems or high SPL automotive systems, where extremely high output is required.

The voice coil is wound on a 2.5″ glass fiber with aluminum wire keeping weight to a minimum for an incredibly quick transient response.

Engineered with 11 mm of winding depth, this inside/outside voice coil provides excellent thermal and mechanical durability.

Combined with its premium ferrite motor, all these characteristics make this speaker unique and deliver high-performance that achieves exceptional clarity, detail, and dynamics on sound.

Popular custom door panel combination with the 10MB800FT and WG2000Py SLIM Mids & Highs Compression Driver all tuned by Our DSP 2.8X ( digital sound processor ) for the best frequency response, follow settings below:

10MB800FT – High Pass Filter HPF 110 Hz BT18 Filter to Low Pass Filter LPF 1800 Hz BT12, following the compression driver from 1000Hz all way to 17,000Hz

Recommended system package 8x 10MB800FT + 4x WG2000Py SLIM

PRV 10″ Midbass Speaker 10MB800FT 800 Watts / 8 Ohm High Power PRO Audio Low Frequency Loudspeaker

2 Speakers – 1x MDX2000.2 at 2 Ohm, 2 speakers in parallel on the bridged channel
4 Speakers – 1x QS3000 at 2 Ohm, 4 speakers in parallel
8 Speakers – 1x QS7000 at 1 Ohm, 8 speakers in parallel

Recommended HPF using PRV Digital Signal Processor DSP when using up to 650 Watts RMS musical power ( without clipping )

• 120 Hz at 12 dB per octave filter Crossover / BT12
• 110 Hz at 18 dB per octave filter Crossover / BT18

If you have compression drivers on your system the recommended LPF is 2,200Hz at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.

GENERAL SPECIFICATIONS

Nominal Diameter	10″ (254 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	400 Watts
Continuous Program Power (RMS)	800 Watts
Max Peak Power	1600 Watts
Sensitivity 2.83V at 1m	99 dB
Recommended High Pass Filter* *For Full Power Handling	120 Hz* *12db Per Octave Crossover
Frequency Response at -10dB	65 – 5,300 Hz
Voice Coil Diameter	2.5″ (65 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	11.0 mm
Former Material	Glass Fiber
Magnetic Gap Depth	8.0 mm
Frame Material	Die Cast Aluminum

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	36.73 l
Excursion (mathematical)***	Xmax	3.50 mm
Free Air Resonance	Fs	64.72 Hz
Mechanical Factor	Qms	15.39
Electrical Factor	Qes	0.33
Total Factor	Qts	0.32
Cone Area	Sd	380 cm²
Mechanical Mass	Mms	33.20 g
Bl Factor	Bl	14.39 Tm
Dc Resistance	Re	5.1 Ohms
Inductance	Le	0.40 mH at 1 kHz
Mechanical Mass Without Air	Mmd	29.01 g
Mechanical Compliance	Cms	0.182 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	10.25” (260.5 mm)
Front Mount Baffle Cutout	8.97” (228 mm)
Mounting Depth	4.09” (104 mm)
Overall Depth	4.68” (119 mm)
Net Weight	11.01 Lbs (5.0 kg)
Shipping Weight	11.90 Lbs (5.4 kg)
Carton Dimensions W x L x H	11.50 ” x 11.50 ” x 6.50” (292 x 292 x 165 mm)

Bringing to you an option that offers the lowest price without sacrificing performance.

• Perfect balance between value and performance
• Lightweight paper cone with triple cloth surround, gives high efficiency 96 dB
• Great value for professional, high output home audio, and car audio applications. 8 Ohm Voice coil.
• Handles 400 Watts, guaranteeing endurance at loudest volumes

Its compact design allows for easy installation in any space, making it versatile and suitable for various audio setups. Featuring a compact push terminal for easy, quick installation.

Don’t underestimate its compact motor design! Featuring the latest technology we can increase tremendously the magnet field without huge magnet.

PRV 8MR400 8″ professional midrange speaker is purpose-built to cover from 90 Hz to 7,500 Hz in three-way speakers, but also works great as a door speaker in car audio applications. Easy to blend in with any 10″ or 12″ midbass and a super tweeter.

PRV 8″ Midrange Speaker 8MR400 PRO Audio 400 Watts / 8 Ohm

4 Speakers – 1x MDX1800.1 2 Ohm, 4 speakers in parallel
8 Speakers – 1x QS3000 1 Ohm, 8 speakers in parallel

Recommended HPF using PRV Digital Signal Processor DSP when using up to 400 Watts RMS musical power ( without clipping )

• 125 Hz at 12 dB per octave filter Crossover / BT12
• 120 Hz at 18 dB per octave filter Crossover / BT18

If you have compression drivers or super tweeters on your system the recommended LPF is 6,000 Hz at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.

GENERAL SPECIFICATIONS

Nominal Diameter	8″ (203 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	200 Watts
Continuous Program Power (RMS)	400 Watts
Max Peak Power	800 Watts
Sensitivity 2.83V at 1m	96 dB
Recommended Hi Pass Crossover** **For Full Power Handling	125Hz** **12db Per Octave Crossover
Frequency Response at -10DB	90 – 7,500 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	12.0 mm
Former Material	Kapton
Magnetic Gap Depth	6.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	20.23 l
Excursion (mathematical)***	Xmax	4.00 mm
Free Air Resonance	Fs	78.2 Hz
Mechanical Factor	Qms	8.52
Electrical Factor	Qes	0.56
Total Factor	Qts	0.52
Cone Area	Sd	222 cm²
Mechanical Mass	Mms	14.05 g
Bl Factor	Bl	8.15 Tm
Dc Resistance	Re	5.4 Ohm
Inductance	Le	0.42 mH at 1 kHz
Mechanical Mass Without Air	Mmd	12.18 g
Mechanical Compliance	Cms	0.295 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	8.27″ (210 mm)
Front Mount Baffle Cutout	6.97″ (177 mm)
Mounting Depth	3.27″ (83 mm)
Overall Depth	3.58″ (91 mm)
Net Weight	4.85 Lbs (2.20 kg)
Shipping Weight	5.45 Lbs (2.48 kg)
Carton Dimensions W x L x H	9.05″ x 9.05″ x 3.98″ (230 x 230 x 100 mm)

The best of the pro audio and car audio worlds are combined in this compact 8″ speaker! The 8CX380-4 SLIM’s coaxial speaker has a built-in tweeter driver, an innovative design that delivers amazing sound clarity.

For a countless number of applications that require high output sound in small locations where conventional drivers wouldn’t fit, we have carefully blended a super tweeter with our PRO Audio shallow midrange speaker in a compact package.

This is the greatest 8″ compact coaxial for custom systems that is both small and loud.

Slim Design – Perfect for tight space applications that require PRO Audio sound quality in small areas where conventional drivers wouldn’t fit.
Built-in driver tweeter with in-line capacitor attenuates perfectly with the speaker, giving you a rich musical response.
380 Watts RMS Music Power Handling, with a 97 dB Sensitivity, capable of generating a lot sound with a small cone!
Grill and Mounting Screws Included
Also available in 6.5″- 6CX380-4 SLIM and 6×9″- 69CX380-4 SLIM

By combining elements from the PRO Audio and Car Audio segments, we have developed a new type of highly efficient coaxial that is able to give high levels of output in compact spaces.

Its slim design makes this coaxial the perfect speaker, allowing it to be utilized in endless ways.

Loud and clear vocals are all within 2.93″ of mounting depth without sacrificing quality or performance.

Its specially composed spider reduces distortion on midbass frequencies, and its double roll surround keeps cone travel linear, while its premium tinsel lead wire is capable of high temperatures.

This makes this speaker not only unique but also gives it all high-performance characteristics and high-quality components, providing exceptional clarity, detail, and dynamic sound.

PRV Audio 8” Full Range 2-Way Coaxial 8CX380-4 Car Speaker 380 Watts 4 Ohm – High Output PRO Audio Sound
Recommended Amplifier configurations and crossover HPF using PRV Digital Signal Processor DSP when using the recommended power below:

Low Power Stereo Setup, One Speaker per Channel, no LPF.
2 Speakers – 1x QS800.4 2 Ohm, 1 speaker per channel in the front Channel
• Amplifier HPF at 90 Hz with 140 Watts RMS musical power
Other 2 Rear Channels can be used for the speakers for the Front Setup

High Power Stereo Setup, One Speaker per Channel
2 Speakers – 1x MDX1200.2 2 Ohm, 1 or 2 speakers per channel
• 110 Hz at 18 dB per octave filter Crossover / BT18, no LPF
when using up to 380 Watts RMS musical power

Custom System, High Power
4 Speakers – 1x MDX1800.1 1 Ohm, 4 speakers in parallel
• 110 Hz at 18 dB per octave filter Crossover / BT18, no LPF
when using up to 380 Watts RMS musical power

GENERAL SPECIFICATIONS

Nominal and Throat Diameter	Low Freq. 8″ (203 mm)	High Freq. 1″ (25.4mm)
Nominal impedance	4 Ohm
Nominal Power Handling*	190 Watts
Continuous Program Power (RMS)**	380 Watts
Max Peak Power***	760 Watts
Sensitivity 2.00V at 1m	97 dB
Recommended Hi Pass Crossover For Full Power Handling	110 Hz 12db Per Octave Crossover
Frequency Response	100 – 20,000Hz
Voice Coil Diameter	1.5″ (38 mm)	1.0″(25mm)
Voice Coil Wire	Copper	CCAW
Voice Coil Winding Depth	8.0 mm	N/A
Former Material	Kapton	Kapton
Magnetic Gap Depth	5.0 mm	N/A
Frame Material	S. Steel	Mylar

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	17.21 l
Excursion (mathematical)***	Xmax	2.75 mm
Free Air Resonance	Fs	92.1 Hz
Mechanical Factor	Qms	12.43
Electrical Factor	Qes	1.19
Total Factor	Qts	1.09
Cone Area	Sd	235 cm²
Mechanical Mass	Mms	13.38 g
Bl Factor	Bl	4.83 Tm
Dc Resistance	Re	3.6 Ohms
Inductance	Le	0.030 mH at 1 kHz
Mechanical Mass Without Air	Mmd	11.34 g
Mechanical Compliance	Cms	0.223 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	8.23″ (209 mm)
Front Mount Baffle Cutout	7.13″ (181 mm)
Mounting Depth	2.93″ (74.5 mm)
Overall Depth	4.10″ (104 mm)(with grill)
Net Weight	4.30 Lbs (1.95 kg)
Shipping Weight	4.85 Lbs (2.20 kg)
Carton Dimensions W x L x H	9.50″ x 9.25″ x 5.50″ (241 x 235 x 140 mm)

This 2-way coaxial is the perfect solution for sedans that just want to swap their 6×9″ on the back deck for high-output sound without having to drill additional holes for tweeters or drivers.

2-Way Coaxial – Transform your sound stereo with one speaker that will play low midbass frequencies and highs at the highest sound output.
A built-in driver tweeter with in-line capacitor attenuates perfectly with the speaker, giving you a rich musical response. Full Range Response
380 Watts RMS Music Power Handling, with 97 dB Sensitivity, capable of generating a lot of sound from one speaker!
Grill and Mounting Screws Included
Also available in 8″ – 8CX380-4 SLIM and 6.5″- 6CX380-4 SLIM

By combining elements from the PRO Audio and Car Audio segments, we have developed a new type of highly efficient coaxial that is able to give high levels of output in a small compact custom system, or even your stock speaker location.

Loud and clear vocals are all within 3.69′′ of mounting depth which makes it really easy to drop in any stock speaker location without much modification.

Its specially composed spider reduces distortion at midbass frequencies, and its double roll surround keeps cone travel linear, while its premium tinsel lead wire is capable of high temperatures.

This makes this speaker not only unique but also gives it all high-performance characteristics and high-quality components, providing exceptional clarity, detail, and dynamic sound.

PRV Audio 6×9” Full Range 2-Way Coaxial 69CX380-4 Car Speaker 380 Watts 4 Ohm – High Output PRO Audio Sound
Recommended Amplifier configurations and crossover HPF using PRV Digital Signal Processor DSP when using the recommended power below:

Low Power Stereo Setup, One Speaker per Channel, no LPF.
2 Speakers – 1x QS800.4 2 Ohm, 1 speaker per channel in the Rear Channel
• Amplifier HPF at 90 Hz with 140 Watts RMS musical power
Other 2 Front Channels can be used for the speakers for the Front Setup

High Power Stereo Setup, One Speaker per Channel
2 Speakers – 1x MDX1200.2 2 Ohm, 1 or 2 speakers per channel
• 110 Hz at 18 dB per octave filter Crossover / BT18, no LPF
when using up to 380 Watts RMS musical power

Custom System, High Power
4 Speakers – 1x MDX1800.1 1 Ohm, 4 speakers in parallel
• 110 Hz at 18 dB per octave filter Crossover / BT18, no LPF
when using up to 380 Watts RMS musical power

GENERAL SPECIFICATIONS

Nominal and Throat Diameter	Low Freq. 6×9″ (152×228 mm)	High Freq. 1″ (25.4mm)
Nominal impedance	4 Ohm
Nominal Power Handling*	190 Watts
Continuous Program Power (RMS)**	380 Watts
Max Peak Power***	760 Watts
Sensitivity 2.00V at 1m	97 dB
Recommended Hi Pass Crossover For Full Power Handling	110 Hz 12db Per Octave Crossover
Frequency Response	90 – 20,000Hz
Voice Coil Diameter	1.5″ (38 mm)	1.0″(25mm)
Voice Coil Wire	Copper	CCAW
Voice Coil Winding Depth	8.0 mm	N/A
Former Material	Kapton	Kapton
Magnetic Gap Depth	5.0 mm	N/A
Frame and Diaphragm Material	S. Steel	Mylar

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	25.32 l
Excursion (mathematical)***	Xmax	2.75 mm
Free Air Resonance	Fs	86.6 Hz
Mechanical Factor	Qms	9.26
Electrical Factor	Qes	0.68
Total Factor	Qts	0.63
Cone Area	Sd	240 cm²
Mechanical Mass	Mms	10.74 g
Bl Factor	Bl	5.17 Tm
Dc Resistance	Re	3.1 Ohms
Inductance	Le	0.22 mH at 1 kHz
Mechanical Mass Without Air	Mmd	8.63 g
Mechanical Compliance	Cms	0.314 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Speaker Size	9.29″x6.40″ (236×162.7 mm)
Front Mount Baffle Cutout	8.52″x5.80″ (216.5×147.3 mm)
Mounting Depth	3.69″ (93.7 mm)
Overall Depth	4.55″ (115.6 mm) (with grill)
Net Weight	4.07 Lbs (1.85 kg)
Shipping Weight	4.62 Lbs (2.10 kg)
Carton Dimensions W x L x H	10.11″x 7.36″ x 5.70″ (257 x 187 x 145mm)

For a countless number of applications that require high output sound in small locations where conventional drivers wouldn’t fit, we have carefully blended a super tweeter with our PRO Audio shallow midrange speaker in a compact package.

This is the greatest 6.5″ 2-way coaxial for car audio you can find that is both small and loud.

Slim Design – Perfect for tight space applications that require PRO Audio sound quality in small areas where conventional drivers wouldn’t fit.
Built-in driver tweeter with in-line capacitor attenuates perfectly with the speaker, giving you a rich musical response.
380 Watts RMS Music Power Handling, with a 96 dB Sensitivity, capable of generating a lot sound with a small cone!
Grill and Mounting Screws Included
Also available in 8″- 8CX380-4 SLIM and 6×9″- 69CX380-4 SLIM

By combining elements from the PRO Audio and Car Audio segments, we have developed a new type of highly efficient coaxial that is able to give high levels of output in compact spaces.

Its slim design makes this coaxial the perfect speaker, allowing it to be utilized in endless ways.

Loud and clear vocals are all within 2.76′′ of mounting depth without sacrificing quality or performance.

Its specially composed spider reduces distortion on midbass frequencies, and its double roll surround keeps cone travel linear, while its premium tinsel lead wire is capable of high temperatures.

This makes this speaker not only unique but also gives it all high-performance characteristics and high-quality components, providing exceptional clarity, detail, and dynamic sound.

PRV Audio 6.5” Full Range 2-Way Coaxial 6CX380-4 Car Speaker 380 Watts 4 Ohm – High Output PRO Audio Sound
Recommended Amplifier configurations and crossover HPF using PRV Digital Signal Processor DSP when using the recommended power below:

Low Power Stereo Setup, One Speaker per Channel, no LPF.
2 Speakers – 1x QS800.4 2 Ohm, 1 speaker per channel in the front Channel
• Amplifier HPF at 90 Hz with 140 Watts RMS musical power
Other 2 Rear Channels can be used for the speakers for the Front Setup

High Power Stereo Setup, One Speaker per Channel
2 Speakers – 1x MDX1200.2 2 Ohm, 1 or 2 speakers per channel
• 120 Hz at 18 dB per octave filter Crossover / BT18, no LPF
when using up to 380 Watts RMS musical power

Custom System, High Power
4 Speakers – 1x MDX1800.1 1 Ohm, 4 speakers in parallel
• 120 Hz at 18 dB per octave filter Crossover / BT18, no LPF
when using up to 380 Watts RMS musical power

GENERAL SPECIFICATIONS

Nominal and Throat Diameter	Low Freq. 6.5″ (152 mm)	High Freq. 1″ (25.4mm)
Nominal impedance	4 Ohm
Nominal Power Handling*	190 Watts
Continuous Program Power (RMS)**	380 Watts
Max Peak Power***	760 Watts
Sensitivity 2.00V at 1m	96 dB
Recommended Hi Pass Crossover For Full Power Handling	120 Hz 12db Per Octave Crossover
Frequency Response	100 – 20,000Hz
Voice Coil Diameter	1.5″ (38 mm)	1.0″(25mm)
Voice Coil Wire	Copper	CCAW
Voice Coil Winding Depth	8.0 mm	N/A
Former Material	Kapton	Kapton
Magnetic Gap Depth	5.0 mm	N/A
Frame Material	S. Steel	Mylar

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	6.61 l
Excursion (mathematical)***	Xmax	2.75 mm
Free Air Resonance	Fs	111.7 Hz
Mechanical Factor	Qms	8.6
Electrical Factor	Qes	0.84
Total Factor	Qts	0.77
Cone Area	Sd	143 cm²
Mechanical Mass	Mms	8.77 g
Bl Factor	Bl	5.11 Tm
Dc Resistance	Re	3.6 Ohms
Inductance	Le	0.113 mH at 1 kHz
Mechanical Mass Without Air	Mmd	7.80 g
Mechanical Compliance	Cms	0.231 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.5″ (165 mm)
Front Mount Baffle Cutout	5.67″ (144 mm)
Mounting Depth	2.76″ (70 mm)
Overall Depth	3.86″ (98 mm)(with grill)
Net Weight	3.85 Lbs (1.75 kg)
Shipping Weight	4.30 Lbs (1.95 kg)
Carton Dimensions W x L x H	7.28″ x 7.48″ x 4.92″ (185 x 190 x 125 mm)

• Seal back basket simplifies cabinet manufacture, eliminating the need for a separate enclosure for other speakers.
• Very compact model with only 2.20″ of mounting depth, suitable for use in 3-way cabinet systems ( Midbass + Seal Basket + High Frequency Driver or Tweeter).
• Optimized to deliver detailed reproduction of mid-range frequencies from 400Hz to 6,000Hz.

A light paper cone is mated to a 1.5″ voice coil for great sensitivity and a 250 watts power handling. A durable spider suspension, woven cloth surround, and stamped steel frame are combined for durability over many hours of use.

Cabinet builders gravitate towards this driver for use in their systems when looking for a lightweight seal basket midrange.

Using a closed basket design in a speaker like the 6MR250SEAL offers several advantages. Firstly, it prevents interference from a woofer or midbass in a small Hi-Fi cabinet, resulting in a cleaner and more accurate midrange response.

Additionally, the closed basket design contributes to a smooth punch of midbass and midrange, enhancing the overall audio performance of the speaker.

PRV 6.5″ Midrange PRO Audio Speaker 6MR250SEAL Sealed Basket / 8 Ohm

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	125 Watts
Continuous Program Power (RMS)	250 Watts
Max Peak Power	500 Watts
Sensitivity 2.83V at 1m	95 dB
Recommended Hi Pass Crossover** **For Full Power Handling	400 Hz** **12db Per Octave Crossover
Frequency Response at -10DB	400 – 6,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	6.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	0.46 l
Excursion (mathematical)***	Xmax	2.50 mm
Free Air Resonance	Fs	387.4 Hz
Mechanical Factor	Qms	23.17
Electrical Factor	Qes	2.80
Total Factor	Qts	2.50
Cone Area	Sd	139 cm²
Mechanical Mass	Mms	9.80 g
Bl Factor	Bl	6.84 Tm
Dc Resistance	Re	5.5 Ohm
Inductance	Le	0.19 mH at 1 kHz
Mechanical Mass Without Air	Mmd	8.87 g
Mechanical Compliance	Cms	0.017 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.58″ ( 167.2mm)
Front Mount Baffle Cutout	5.79″ (147 mm)
Mounting Depth	2.20″ (56 mm)
Overall Depth	3.47″ (62.7 mm)
Net Weight	3.88 Lbs (1.76 kg)
Shipping Weight	4.32 Lbs (1.96 kg)
Carton Dimensions W x L x H	7.09″ x 7.09″ x 3.14″ (180 x 180 x 80 mm)

• A deep midbass response along with a strong vocal response
• Outstanding durability and strong impactful midbass for a car stereo
• Natural paper cone and double-roll surround for smooth response
• Handles 200 Watts, guaranteeing endurance at loudest volumes
• Impressive choice for car audio systems – 4 Ohm impedance also available in 8 Ohm

The 6MB200 v2 now has a more extended midrange response, up to 6.5 kHz giving it clean vocals. Loud and clear vocals all within 2.60″ of mounting depth without sacrificing quality and performance.

The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment.

Its light weight of only 3.3 Lbs helps to keep your enclosure light, making it perfect for custom door panels.

PRV Audio 6.5” Car Speaker 6MB200-4 Midbass 200 Watts 4 Ohm – High Output PRO Audio

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	4 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.00V at 1m	93.5 dB
Recommended Hi Pass Crossover* *For Full Power Handling	125 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	125 – 6,500 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	12.5 mm
Former Material	Kapton
Magnetic Gap Depth	5.8 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	3.97 l
Excursion (mathematical)***	Xmax	4.80 mm
Free Air Resonance	Fs	123.79 Hz
Mechanical Factor	Qms	20.84
Electrical Factor	Qes	1.02
Total Factor	Qts	0.97
Cone Area	Sd	154 cm²
Mechanical Mass	Mms	11.89 g
Bl Factor	Bl	5.79 Tm
Dc Resistance	Re	3.7 Ohms
Inductance	Le	0.18 mH at 1 kHz
Mechanical Mass Without Air	Mmd	10.92 g
Mechanical Compliance	Cms	0.139 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.53″ (166 mm)
Front Mount Baffle Cutout	5.63″ (143 mm)
Mounting Depth	2.6″ (66 mm)
Overall Depth	2.91″ (74 mm)
Net Weight	3.30 Lbs (1.50 kg)
Shipping Weight	3.62 Lbs (1.64 kg)
Carton Dimensions W x L x H	7.17″ x 7.17″ x 4.13″ (182 x 182 x 105 mm)

• A deep midbass response along with a strong vocal response
• Outstanding durability and strong impactful midbass even in small enclosures
• Natural paper cone and double-roll surround for smooth response
• Handles 200 Watts, guaranteeing endurance at loudest volumes
• Impressive choice for high output home, car, and professional audio systems – 8 Ohm impedance also available in 4 Ohm

The 6MB200 v2 now has a more extended midrange response, up to 6.5 kHz giving it clean vocals. A perfect option for mid bass speaker replacements in three-way cabinets. The Perfect speaker for TUKUTEO® sound.

The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment.

Its light weight of only 3.3 Lbs helps to keep your enclosure light, making it perfect for portable audio applications.

PRV Audio 6.5” PRO Audio Midbass 6MB200 Loudspeaker 200 Watts 8 Ohm – Professional Woofer

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.00V at 1m	93.5 dB
Recommended Hi Pass Crossover* *For Full Power Handling	125 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	125 – 6,500 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	12.5 mm
Former Material	Kapton
Magnetic Gap Depth	5.8 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	4.13 l
Excursion (mathematical)***	Xmax	4.80 mm
Free Air Resonance	Fs	123.28 Hz
Mechanical Factor	Qms	20.81
Electrical Factor	Qes	1.20
Total Factor	Qts	1.13
Cone Area	Sd	154 cm²
Mechanical Mass	Mms	11.57 g
Bl Factor	Bl	7.05 Tm
Dc Resistance	Re	6.7 Ohms
Inductance	Le	0.25 mH at 1 kHz
Mechanical Mass Without Air	Mmd	10.55 g
Mechanical Compliance	Cms	0.144 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.53″ (166 mm)
Front Mount Baffle Cutout	5.63″ (143 mm)
Mounting Depth	2.6″ (66 mm)
Overall Depth	2.91″ (74 mm)
Net Weight	3.30 Lbs (1.50 kg)
Shipping Weight	3.62 Lbs (1.64 kg)
Carton Dimensions W x L x H	7.17″ x 7.17″ x 4.13″ (182 x 182 x 105 mm)

• 6.5″ Car audio midrange speaker designed for Low Frequencies with shallow profile
• 200 watts RMS program power gives capability of high acoustical output with small amplifier
• Impressive choice for high output, car audio, and custom systems – 4 Ohm Impedance
• Smooth response through the mid-bass and vocal range at at loudest volumes

To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.

The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.

This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.

PRV 6.5″ Midrange Car Speaker 6MR200A-4 200 Watts / 4 Ohm PRO Loudspeaker

GENERAL SPECIFICATIONS

Nominal Diameter	6.5″ (165 mm)
Nominal impedance	4 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.00V at 1m	94 dB
Recommended Hi Pass Crossover* *For Full Power Handling	150 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	155 – 11,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	5.5 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	3.89 l
Excursion (mathematical)***	Xmax	2.62 mm
Free Air Resonance	Fs	138.3 Hz
Mechanical Factor	Qms	9.47
Electrical Factor	Qes	1.08
Total Factor	Qts	0.97
Cone Area	Sd	137 cm²
Mechanical Mass	Mms	8.89 g
Bl Factor	Bl	4.92 Tm
Dc Resistance	Re	3.4 Ohm
Inductance	Le	0.18 mH at 1 kHz
Mechanical Mass Without Air	Mmd	7.98 g
Mechanical Compliance	Cms	0.149 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.59″ (167.5 mm)
Front Mount Baffle Cutout	5.69″ (144.5 mm)
Mounting Depth	2.24″ (57 mm)
Overall Depth	2.50″ (63.5 mm)
Net Weight	3.52 Lbs (1.60 kg)
Shipping Weight	3.79 Lbs (1.75 kg)
Carton Dimensions W x L x H	7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm)

• 6.5″ PRO audio Midrange speaker designed for Low Frequencies with shallow profile
• 200 watts RMS program power gives capability of high acoustical output with small amplifier
• Impressive choice for high output home, car, and professional audio systems – 8 Ohm Impedance
• Smooth response through the mid-bass and vocal range at at loudest volumes

To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.

The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.

This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.

PRV 6.5″ Midrange Speaker 6MR200A 200 Watts / 8 Ohm PRO Audio Loudspeaker

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohms
Rated AES Power Handling (RMS)	100 Watts
Program Power	200 Watts
Sensitivity 2.83V at 1m	94 dB
Recommended Hi Pass Crossover* *For Full Power Handling	150 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	155 – 11,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	5.5 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	3.16 l
Excursion (mathematical)***	Xmax	2.62 mm
Free Air Resonance	Fs	114.1 Hz
Mechanical Factor	Qms	13.16
Electrical Factor	Qes	1.28
Total Factor	Qts	1.17
Cone Area	Sd	137 cm²
Mechanical Mass	Mms	10.1 g
Bl Factor	Bl	6.27 Tm
Dc Resistance	Re	5.5 Ohms
Inductance	Le	0.26 mH at 1 kHz
Mechanical Mass Without Air	Mmd	9.02 g
Mechanical Compliance	Cms	0.120 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.59″ (167.5 mm)
Front Mount Baffle Cutout	5.69″ (144.5 mm)
Mounting Depth	2.24″ (57 mm)
Overall Depth	2.5″ (63.5 mm)
Net Weight	3.52 Lbs (1.60 kg)
Shipping Weight	3.79 Lbs (1.75 kg)
Carton Dimensions W x L x H	7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm)

 

• True full-range response ( 80 – 20,000Hz ) makes it easy to add midrange and high frequency to any system
• Impressive choice for a compact, high output home, car, and professional audio systems – 8 Ohm impedance
• 92.5 dB – High efficiency, you do not need a lot of power to achieve extreme SPL levels
• Dual Cone Full Range Loudspeaker – Secondary “whizzer” cone improves high frequency response

The dual cone setup maximizes sound clarity. The primary cone handles lows to midrange frequencies while the smaller whizzer cone increases high-frequency response, yet it still has a wide frequency range, 80Hz to 20,000Hz, despite its small size.

In addition to delivering superior performance across a wide range of frequencies, its innovative design sets it apart from traditional speakers.

These full-range speakers are focused on a combination of a small motor with a copper ring and an unique whizzer cone with a woven-cloth dust cap which provides exceptional clarity, deep mid-bass, high detail, and dynamics at high sensitivity.

Great option for car audio systems and simple portable speaker designs. Whether you’re a DIY audio enthusiast or a professional sound engineer, the FR series is the go-to choice for any audio project that demands exceptional sound quality and clarity all from a single speaker.

PRV Audio 6.5″ Fullrange Speaker 6FR200 PRO Audio Loudspeaker 200 Watts / 8 Ohm

Recommended HPF using PRV Digital Signal Processor DSP when using up to 200 Watts RMS musical power ( without clipping )

• 85 Hz at 12 dB per octave filter Crossover / BT12
• 70 Hz at 18 dB per octave filter Crossover / BT18

We do not recommend using a LPF at low power to take advantage of its high frequency response.

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.83V at 1m	92.5 dB
Recommended Hi Pass Crossover** **For Full Power Handling	85 Hz** **12db Per Octave Crossover
Frequency Response	80 – 20,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	10.0 mm
Former Material	Kapton
Magnetic Gap Depth	6.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.} 

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	6.93 l
Excursion (mathematical)***	Xmax	3.50 mm
Free Air Resonance	Fs	111.7 Hz
Mechanical Factor	Qms	15.69
Electrical Factor	Qes	1.40
Total Factor	Qts	1.29
Cone Area	Sd	143 cm²
Mechanical Mass	Mms	8.37 g
Bl Factor	Bl	5.17 Tm
Dc Resistance	Re	6.4 Ohms
Inductance	Le	0.264 mH at 1 kHz
Mechanical Mass Without Air	Mmd	7.40 g
Mechanical Compliance	Cms	0.242 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.55” (166.5 mm)
Front Mount Baffle Cutout	5.73” (145.5 mm)
Mounting Depth	2.81” (71.5 mm)
Overall Depth	3.09” (78.5 mm)
Net Weight	2.78 Lbs (1.27 kg)
Shipping Weight	3.08 Lbs (1.4 kg)
Carton Dimensions W x L x H	6.89” x 6.89” x 3.74” (175 x 175 x 95 mm)

 

The 6MB100-4 speakers can be used to transform a stock system into a concert level experience without cutting up interior panels. The shallow mounting depth of 2.32″ is designed for easier installation with its standard frame size that fits in many OEM speaker locations. Their standard frame size ensures compatibility with numerous OEM speaker locations.

• Under 2.32″ (60 mm) mounting depth, with compact diameter magnet motor
• Broad 90 – 10,000 Hz frequency range for ultimate flexibility
• Nominal Impedance: 4 Ohms – perfect to install from radio outputs
• Power handling: 200 Watts RMS per Pair
• Sensitivity (1W/1m): 90 dB – Improvement over most stock car audio speakers

These Pro Audio On Wheels ® speakers will handle 200 Watts RMS power able to response on a wide frequency range 90 – 10,000 Hz at an excellent sensitivity of 90dB. This PA Style speaker is a great upgrade for listeners wanting to go well beyond the standard factory upgrade.

We have ingeniously merged the realms of PRO audio and high-fidelity audio to create a groundbreaking driver, meticulously designed to achieve elevated levels of pristine output while seamlessly fitting within stock speaker locations.

6.5″ Midbass Speakers 6MB100-4 – 200 Watts PAIR of factory replacement 4 Ohm Car Speakers

GENERAL SPECIFICATIONS

Nominal Diameter	6.5″ (165 mm)
Nominal impedance	4 Ohm
Nominal Power Handling*	50 Watts each
Continuous Program Power (RMS)**	100 Watts each
Max Peak Power***	200 Watts each
Sensitivity 2.00V at 1m	90 dB
Recommended Hi Pass Crossover For Full Power Handling	90 Hz 12db Per Octave Crossover
Frequency Response	90 – 10,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	5.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	7.22 l
Excursion	Xmax***	2.75 mm
Free Air Resonance	Fs	93.2 Hz
Mechanical Factor	Qms	5.75
Electrical Factor	Qes	1.37
Total Factor	Qts	1.10
Cone Area	Sd	143 cm²
Mechanical Mass	Mms	11.53 g
Bl Factor	Bl	4.33 Tm
Dc Resistance	Re	3.8 Ohm
Inductance	Le	0.22 mH at 1 kHz
Mechanical Mass Without Air	Mmd	10.55 g
Mechanical Compliance	Cms	0.252 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.54″ (166 mm)
Front Mount Baffle Cutout	5.60″ (142 mm)
Mounting Depth	2.32″ (59 mm)
Overall Depth	2.55″ (64.7 mm)
Net Weight	2.09 Lbs (0.95 kg) each
Shipping Weight	4.89 Lbs (2.22 kg) Pair
Carton Dimensions W x L x H	7.08″ x 14.56″ x 3.1″ (180 x 370 x 80 mm)

The PRV Audio Pro Audio Loudspeaker, 5MR450-NDY-4 midrange woofer offers outstanding durability and a smooth midrange response through 16kHz.

 

This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even the home studio monitors. It is a great option for three way cabinets requiring additional midrange support.

The high end neodymium magnet assembly was chosen to increase sensitivity and power handling. This neodymium is attached to a sturdy reinforced cast aluminum frame to ensure a solid support structure for long lasting play in most any environment. Its light weight of only 2.65 lbs helps keep your enclosures light and is a great use for use for car doors and installers looking for high SPL midrange and upper midrange responses.

 

 

 

• Nominal Impedance: 4 Ohm
• 450 Watts RMS Music Power Handling, with a 94 dB Sensitivity, capable of generating a lot output at wide frequency range!
• Voice Coil Diameter: 1.5″
• Ideal solution for compact full-range applications demanding high acoustic output

GENERAL SPECIFICATIONS

Nominal Diameter	5″ (127 mm)
Nominal Impedance	4 Ohm
Nominal Power Handling	225 Watts
Continuous Program Power (RMS)	450 Watts
Max Peak Power	900 Watts
Sensitivity 2.00V at 1m	94 dB
Recommended Hi Pass Crossover* *For Full Power Handling	290 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	160- 16,000 Hz
Voice Coil Diameter	1.5″ (38.1 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	9.5 mm
Former Material	Kapton
Magnetic Gap Depth	5.8 mm
Frame Material	Die Cast Aluminum

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

---

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	1.56 l
Excursion (mathematical)***	Xmax	3.30 mm
Free Air Resonance	Fs	149.5 Hz
Mechanical Factor	Qms	20.74
Electrical Factor	Qes	0.50
Total Factor	Qts	0.49
Cone Area	Sd	95 cm²
Mechanical Mass	Mms	9.14 g
Bl Factor	Bl	7.94 Tm
Dc Resistance	Re	3.7 Ohms
Inductance	Le	0.02 mH at 1 kHz
Mechanical Mass Without Air	Mmd	8.62 g
Mechanical Compliance	Cms	0.123 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

---

EXTRA INFO

Overall Diameter	5.79″ (147 mm)
Front Mount Baffle Cutout	4.72″ (120 mm)
Mounting Depth	2.60″ (66 mm)
Overall Depth	2.95″ (75 mm)
Net Weight	2.65 Lbs (1.2 kg)
Shipping Weight	2.85 Lbs (1.3 kg)
Carton Dimensions W x L x H	6.1” x 6.1 x 3.7” (155 x 155 x 95mm)

 

PRV AUDIO 5MR450-NDY-4 DATASHEET

The PRV Audio Pro Audio Loudspeaker, 5MR450-NDY-4 midrange woofer offers outstanding durability and a smooth midrange response through 16kHz.

 

This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even the home studio monitors. It is a great option for three way cabinets requiring additional midrange support.

The high end neodymium magnet assembly was chosen to increase sensitivity and power handling. This neodymium is attached to a sturdy reinforced cast aluminum frame to ensure a solid support structure for long lasting play in most any environment. Its light weight of only 2.65 lbs helps keep your enclosures light and is a great use for use for car doors and installers looking for high SPL midrange and upper midrange responses.

 

 

 

• Nominal Impedance: 4 Ohm
• 450 Watts RMS Music Power Handling, with a 94 dB Sensitivity, capable of generating a lot output at wide frequency range!
• Voice Coil Diameter: 1.5″
• Ideal solution for compact full-range applications demanding high acoustic output

GENERAL SPECIFICATIONS

Nominal Diameter	5″ (127 mm)
Nominal Impedance	4 Ohm
Nominal Power Handling	225 Watts
Continuous Program Power (RMS)	450 Watts
Max Peak Power	900 Watts
Sensitivity 2.00V at 1m	94 dB
Recommended Hi Pass Crossover* *For Full Power Handling	290 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	160- 16,000 Hz
Voice Coil Diameter	1.5″ (38.1 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	9.5 mm
Former Material	Kapton
Magnetic Gap Depth	5.8 mm
Frame Material	Die Cast Aluminum

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

---

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	1.56 l
Excursion (mathematical)***	Xmax	3.30 mm
Free Air Resonance	Fs	149.5 Hz
Mechanical Factor	Qms	20.74
Electrical Factor	Qes	0.50
Total Factor	Qts	0.49
Cone Area	Sd	95 cm²
Mechanical Mass	Mms	9.14 g
Bl Factor	Bl	7.94 Tm
Dc Resistance	Re	3.7 Ohms
Inductance	Le	0.02 mH at 1 kHz
Mechanical Mass Without Air	Mmd	8.62 g
Mechanical Compliance	Cms	0.123 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

---

EXTRA INFO

Overall Diameter	5.79″ (147 mm)
Front Mount Baffle Cutout	4.72″ (120 mm)
Mounting Depth	2.60″ (66 mm)
Overall Depth	2.95″ (75 mm)
Net Weight	2.65 Lbs (1.2 kg)
Shipping Weight	2.85 Lbs (1.3 kg)
Carton Dimensions W x L x H	6.1” x 6.1 x 3.7” (155 x 155 x 95mm)

 

PRV AUDIO 5MR450-NDY-4 DATASHEET

The compact 4MR60NDY-4 is a 4″ full range neodymium loudspeaker that can deliver broad frequency coverage and flat midrange response that ensures vocals and instruments to deliver ideal sound to perform well in portable speaker systems, line arrays, or even car audio applications where weight and space limitations comes as a major factor in the project. With 91 dB efficiency and 60 watts power handling this driver is capable of remarkable output for its size.

• Nominal Impedance: 4 Ohm
• 60 Watts RMS Music Power Handling, with a 91 dB Sensitivity, capable of generating a lot sound with a small cone!
• Broad 90-20,000 Hz frequency range for ultimate flexibility
• Strong neodymium motor, increases efficiency on a compact design.
• Very low profile loudspeaker, fit it in tight spots easily!

Super well balanced frequency response from 90 to 20,000Hz, making this a MR. Do-It-All with high fidelity sound as a midbass, midrange or full-range speaker.

GENERAL SPECIFICATIONS

Nominal Diameter	4” (101.6 mm)
Nominal impedance	4 Ohm
Nominal Power Handling*	30 Watts
Continuous Program Power (RMS)**	60 Watts
Max Peak Power***	120 Watts
Sensitivity 2.83V at 1m	91 dB
Recommended Hi Pass Crossover For Full Power Handling	120Hz 12db Per Octave Crossover
Frequency Response	90 – 20,000 Hz
Voice Coil Diameter	0.75” (19 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	4.8 mm
Former Material	Polyimide
Magnetic Gap Depth	4 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.
**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation.
***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	2.85 l
Excursion (mathematical)***	Xmax	1.40 mm
Free Air Resonance	Fs	95.6 Hz
Mechanical Factor	Qms	4.74
Electrical Factor	Qes	1.04
Total Factor	Qts	0.85
Cone Area	Sd	55.4 cm²
Mechanical Mass	Mms	4.17 g
Bl Factor	Bl	2.82 Tm
Dc Resistance	Re	3.3 Ohm
Inductance	Le	0.051 mH at 1 kHz
Mechanical Mass Without Air	Mmd	3.93 g
Mechanical Compliance	Cms	0.664 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Magnetic Gap Depth/4

EXTRA INFO

Overall Diameter	5.02” (127.5 mm)
Front Mount Baffle Cutout	3.64” (92.5 mm)
Mounting Depth	1.75” (44.5 mm)
Overall Depth	1.97” (50 mm)
Net Weight	0.55 Lb (0.25 kg)
Shipping Weight	0.62 Lb (0.28 kg)
Carton Dimensions W x L x H	5.04” x 4.5” x 2.24” (128 x 114 x 57 mm)

• Nominal Impedance: 4 Ohm
• 60 Watts RMS Music Power Handling, with a 90 dB Sensitivity, capable of generating alot sound with a small cone!
• Voice Coil Diameter: 0.78″
• Ideal solution for compact full-range applications

GENERAL SPECIFICATIONS

Nominal Diameter	4” (101.6 mm)
Nominal impedance	4 Ohms
Rated AES Power Handling (RMS)	30 Watts
Program Power	60 Watts
Sensitivity 2.00V at 1m	90 dB
Recommended Hi Pass Crossover* *For Full Power Handling	190 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	90 – 15,000 Hz
Voice Coil Diameter	0.78” (20 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	7.5 mm
Former Material	Kapton
Magnetic Gap Depth	3.5 mm
Frame Material	Stamped Steel

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	3.26 l
Excursion (mathematical)***	Xmax	2.87 mm
Free Air Resonance	Fs	89.88 Hz
Mechanical Factor	Qms	7.34
Electrical Factor	Qes	0.75
Total Factor	Qts	0.68
Cone Area	Sd	57 cm²
Mechanical Mass	Mms	4.32 g
Bl Factor	Bl	3.42 Tm
Dc Resistance	Re	3.6 Ohms
Inductance	Le	0.20 mH at 1 kHz
Mechanical Mass Without Air	Mmd	4.07 g
Mechanical Compliance	Cms	0.725 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	4.96” (126 mm)
Front Mount Baffle Cutout	4.02” (102 mm)
Mounting Depth	2.20” (56 mm)
Overall Depth	2.36” (60 mm)
Net Weight	1.15 Lbs (0.52 kg)
Shipping Weight	1.24 Lbs (0.56 kg)
Carton Dimensions W x L x H	4.68” x 4.68” x 3.15” (119 x 119 x 80 mm)

The compact 3MR40-NDY-4 is a 3″ full range loudspeaker designed to perform in portable speaker systems, line arrays, or even car audio applications where weight and space limitations comes as a major factor in the project. With 91 dB efficiency and 40 watts power handling this driver is capable of remarkable output for its size.

• Nominal Impedance: 4 Ohm
• 40 Watts RMS Music Power Handling, with a 91 dB Sensitivity, capable of generating a lot sound with a small cone!
• Voice Coil Diameter: 0.75″
• Strong neodymium motor, increases efficiency on a compact design.
• Very low profile loudspeaker, fit it in tight spots easily!

Super well balanced frequency response from 120 to 20,000Hz, making this a MR. Do-It-All with high fidelity sound as a midbass, midrange or full-range speaker.

GENERAL SPECIFICATIONS

Nominal Diameter	3” (76.2 mm)
Nominal impedance	4 Ohm
Nominal Power Handling*	20 Watts
Continuous Program Power (RMS)**	40 Watts
Max Peak Power***	80 Watts
Sensitivity 2.00V at 1m	91 dB
Recommended Hi Pass Crossover For Full Power Handling	160Hz 12db Per Octave Crossover
Frequency Response	120 – 20,000 Hz
Voice Coil Diameter	0.75” (19 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	4.8 mm
Former Material	Polyimide
Magnetic Gap Depth	4 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range.
**Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation.
***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	0.63 l
Excursion (mathematical)***	Xmax	1.40 mm
Free Air Resonance	Fs	153.2 Hz
Mechanical Factor	Qms	3.41
Electrical Factor	Qes	0.99
Total Factor	Qts	0.77
Cone Area	Sd	33.2 cm²
Mechanical Mass	Mms	2.62 g
Bl Factor	Bl	2.93 Tm
Dc Resistance	Re	3.4 Ohms
Inductance	Le	0.01 mH at 1 kHz
Mechanical Mass Without Air	Mmd	2.51 g
Mechanical Compliance	Cms	0.443 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Magnetic Gap Depth/4

EXTRA INFO

Overall Diameter	3.69” (93.7 mm)
Front Mount Baffle Cutout	2.79” (71 mm)
Mounting Depth	1.59” (40.5 mm)
Overall Depth	1.83” (46.5 mm)
Net Weight	0.51 Lb (0.23 kg)
Shipping Weight	0.55 Lb (0.25 kg)
Carton Dimensions W x L x H	4.09” x 3.54” x 2.0” (104 x 90 x 51 mm)

PRV Audio Group has engineered the EQ7-15 equalizer for car audio enthusiasts to finally be able to take full control of their custom and competition sound system in the highest quality of sound amplification. its 7 bands of equalization allow you to fine-tune your sound, dialing your music into perfection.

• 1/2 – DIN Graphic Equalizer with 2 Selectable inputs
• 7- Band Graphic Equalizer: 50Hz, 125Hz, 320Hz, 750Hz, 2,200Hz, 6,000Hz, 16,000Hz
• 6-Channel / 15-Volt RCA Line-Level Output ( Front, Rear and Subwoofer)
• Front Panel Selectable illumination: White or Orange LED
• RCA AUX Input with Variable Gain Adjustment
• Subwoofer level control with a Selectable 12dB Low-Pass Filter (60Hz or 120Hz)
• Fader Control (Right/ Left)

After several months of research and development, with the help of car audio competitors, we were able to obtain a high level of output from this equalizer. Competitors can push their systems during competitions, with a high output signal, and maintain superior control over the audio spectrum, without any distortion.

Built unlike other EQs, ours focuses on the ability to give you the POWERFUL signal required to get the most out of your custom sound system.

Manufactured using some of the highest quality and most reliable electrical components, many with 1% tolerance components throughout.

Combining its high 20dB headroom capability with 15 volts outputs make this audio equalizer capable of high signal performance, ensuring that your amplifiers will get a clean, powerful signal for maximum performance.

Graphic equalizers are quite simple on the EQ7-15 it features one control for each frequency band present. These knobs allow you to either cut down that particular frequency or boost it in the mix.

All 7 Band knobs are designed for the best grip with a precision stop point at 0 db gain. Each adjustment allows a -12dB to +12db on each frequency point with a 20dB headroom, that is able to amplify the signal with high peak levels without any signal compression, or distortion.

An great addition to your PRV EQ7-15 Equalizer is a Crossover or Digital Signal Processor to ensure proper frequency range tuned to each equipment on your custom system! Control your system like a pro, with PRV Radio Box, makes it easy for you to have multiple EQ7-15 to control your system at your fingertips with your Single Din Radio.

Included in the Box:

• 1/2-DIN Graphic EQ – EQ7-15
• 3-Pin Plug for Power/Ground/ Remote Wire
• 2 Brackets
• 4 Machine screws
• 2 Self-tapping screws
• Owner’s Manual/Installation Manual

Through an LCD display and intuitive interface, it allows real-time audio adjustments. The DSP 2.4X features 2 audio inputs (A and B) and 4 independent outputs and allows you to choose the audio source (A, B or A + B) for each output. It has an integrated equalization system, with 15-band graphic equalizer, manual tuning, or through 12 presets (Flat, Loudness, Bass Boost, Mid Bass, Treble Boost, Powerful, Electronic, Rock, Hip Hop, Pop, Vocal and Pancadão).

For professional equalization adjustments, it has 1 INPUT Parametric Equalizer and 1 OUTPUT Parametric Equalizer with gain control, specific frequency setting, and equalizer bandwidth, allowing fine adjustments and detailed equalization control.
The Crossover function allows you to precisely define the cut frequencies, attenuation rates, and topology of the LowPass and HighPass filters with Butterworth and Linkwitz-Riley filters (12/18/24/36/48 dB / 8ª).

To aid in the protection of amplifiers and loudspeakers, the DSP 2.4X features a Limiter with Dynamic Attack-Release system that dynamically controls the Attack and Release parameters in real-time, providing security and sound fidelity.

In the audio treatment, it also has Alignment capabilities through High Accuracy Delay, Phase Inversion, Independent Gain by Output and Master Level. For accurate measurements and adjustments, the DSP 2.4X features an integrated Audio Generator with tone generation and frequency sweep, and Pink Noise. Configuration Copy functions between output channels.
It also has the functions of Management, Save and Load Settings in memory, Security Password that blocks the editing of the parameters, Marquee / Text Display, and Language Selection.

For more information on all functionality please read the instruction manual.

Sequencer Feature

Allows sequential triggering of other products through the remote trigger connection (REM). Use a cable of at least 20 AWG.  The sequencer has three outputs (S1, S2, and S3) which are sequentially activated and deactivated according to the input signal from the remote input (REM IN).

The triggering interval between each output can be set from 0s to 4s. When the set time is 0s, all three outputs will be enabled and disabled at the same time after 3s of the input remote (REM IN) signal change.

• Number of processors (DSPs): 1
• Input Channels: 2
• Output Channels: 4
• Display: LCD16x2 Characters
• Built-In Remote Out ( Sequencer )

• GENERAL SPECIFICATIONS

  Number of processors (DSPs)	1
  Input Channels	2
  Output Channels	4
  Output Gain	Yes
  Master Level	0 ~ 100%
  Graphic Equalizer	15 Band
  Graphic Equalizer Presets	12
  Parametric Equalizer Input	1
  Parametric Equalizer Output	4 / 1 per Channel
  Routing	A,B / A+B
  Crossover Butterworth (dB/8ª)	12/18/24/36/48
  Crossover Linkwitz-Riley (dB/8ª)	12/18/24/36/48
  Limiter	Yes
  Automatic Attack/Release	Yes
  Delay	0 to 8 ms (275 cm)
  Frequency Generator	10Hz – 22kHz, Level -60 at 0dB
  Frequency Scan	10Hz – 22kHz / Level -60 at 0dB / Control of speed
  Display	LCD16x2 Characters
  Screen Saver	Text
  Security Password	Yes
  Frequency Response(+/-3dB)	10Hz @ 22.5kHz @ -1dB
  Latency	1.08ms
  Signal to Noise	>90dB
  THD	<0,01%
  Channel Separation	> 80 dB
  Maximum Input Voltage	5,6 Vpp (+8,2 dBu)
  Maximum Output Voltage	5,6 Vpp (+8,2 dBu)
  Supply Voltage	9V to 16V DC
  Dimensions (HxWxL)	1.45″ x 7.87″ x 3.97″
  Weight	1 Lbs

  ---

  PRV AUDIO DSP 2.4X PRODUCT MANUAL

DSP 2.4X TEAM – Digital Audio Processor, Crossover & Equalizer – 2 Inputs & 4 Outputs – 15- Band Graphic Equalization

Bringing innovation and technology to the Automotive Sound market, PRV Audio launches the DSP2.4X TEAM Digital Signal Processor, capable of making various Real-time signal adjustments, from crossover filters, graphic and parametric equalization, alignment, phase inversion, limiter, audio generator, among others. Enhancing Your Audio System!

Through an LCD display and intuitive interface, it allows real-time audio adjustments. The DSP 2.4X TEAM features 2 audio inputs (A and B) and 4 independent outputs and allows you to choose the audio source (A, B or A + B) for each output. It has an integrated equalization system, with 15-band graphic equalizer, manual tuning, or through 12 presets (Flat, Loudness, Bass Boost, Mid Bass, Treble Boost, Powerful, Electronic, Rock, Hip Hop, Pop, Vocal and Pancadão)

For professional equalization adjustments, it has 1 INPUT Parametric Equalizer and 1 OUTPUT Parametric Equalizer with gain control, specific frequency setting, and equalizer bandwidth, allowing fine adjustments and detailed equalization control. 

The Crossover function allows you to precisely define the cut frequencies, attenuation rates, and topology of the LowPass and HighPass filters with Butterworth and Linkwitz-Riley filters (12/18/24/36/48 dB / 8ª).

To aid in the protection of amplifiers and loudspeakers, the DSP 2.4X TEAM features a Limiter with Dynamic Attack-Release system that dynamically controls the Attack and Release parameters in real-time, providing security and sound fidelity.

In the audio treatment, it also has Alignment capabilities through High Accuracy Delay, Phase Inversion, Independent Gain by Output and Master Level. For accurate measurements and adjustments, the DSP 2.4X features an integrated Audio Generator with tone generation and frequency sweep, and Pink Noise. Configuration Copy functions between output channels.

It also has functions of Management, Save and Load Settings in memory, Security Password that blocks the editing of the parameters, Marquee / Text Display, and Language Selection.

For more information on all functionalities please read the instruction manual.

Sequencer Feature

Allows sequential triggering of other products through the remote trigger connection (REM). Use a cable of at least 20 AWG. The sequencer has three outputs (S1, S2, and S3) which are sequentially activated and deactivated according to the input signal from the remote input (REM IN).

The triggering interval between each output can be set from 0s to 4s. When the set time is 0s, all three outputs will be enabled and disabled at the same time after 3s of the input remote (REM IN) signal change.

• PRV DSP 2.4X TEAM enables detailed configurations for 4-Way car audio sound projects, giving you tools such as graphic and parametric equalizations, high-precision crossover filters, time alignment, phase inversion and adjustable limiters
• 15 Band Graphic Equalization – attenuate or boost up to ± 12 dB per band
• 2 Channel Inputs – A and B – Support 2 different Signal Inputs ( Left and Right Stereo)
• 4 Channel Outputs with Independent Gain, Crossover and Parametric Eq Setting per Channel
• Advanced Controls for Limiter, Phase and Delay Controls per output channel
• 10 Digital Crossover Filters Options for HPF and LPF Settings
• Built-In Remote Out Control ( Sequencer )
• Built-in Tools such as: Tone Generator and Frequency Sweeps.

PRV AUDIO Car Audio DSP 2.4X TEAM Digital Crossover and Equalizer 4 Channel Digital Signal Audio Processor DSP with Sequencer Remote Relay – 15-Band Graphic Equalization

GENERAL SPECIFICATIONS

DSP 2.8X TEAM – Digital Audio Processor, Crossover & Equalizer – 2 Inputs & 8 Outputs – 15- Band Graphic Equalization

Bringing innovation and technology to the Automotive Sound market, PRV Audio launches the DSP2.8X TEAM Digital Signal Processor, capable of making various Real-time signal adjustments, from crossover filters, graphic and parametric equalization, alignment, phase inversion, limiter, audio generator, among others. Enhancing Your Audio System!

Through an LCD display and intuitive interface, it allows real-time audio adjustments. The DSP 2.8X TEAM features 2 audio inputs (A and B) and 8 independent outputs and allows you to choose the audio source (A, B or A + B) for each output. It has an integrated equalization system, with 15-band graphic equalizer, manual tuning, or through 12 presets (Flat, Loudness, Bass Boost, Mid Bass, Treble Boost, Powerful, Electronic, Rock, Hip Hop, Pop, Vocal and Pancadão).

For professional equalization adjustments, it has 1 INPUT Parametric Equalizer and 1 OUTPUT Parametric Equalizer with gain control, specific frequency setting, and equalizer bandwidth, allowing fine adjustments and detailed equalization control.The Crossover function allows you to precisely define the cut frequencies, attenuation rates, and topology of the LowPass and HighPass filters with Butterworth and Linkwitz-Riley filters (12/18/24/36/48 dB / 8ª). 

To aid in the protection of amplifiers and loudspeakers, the DSP 2.8X TEAM features a Limiter with Dynamic Attack-Release system that dynamically controls the Attack and Release parameters in real-time, providing security and sound fidelity.

In the audio treatment, it also has Alignment capabilities through High Accuracy Delay, Phase Inversion, Independent Gain by Output and Master Level. For accurate measurements and adjustments, the DSP 2.8X features an integrated Audio Generator with tone generation and frequency sweep, and Pink Noise. Configuration Copy functions between output channels.

It also has functions of Management, Save and Load Settings in memory, Security Password that blocks the editing of the parameters, Marquee / Text Display, and Language Selection.

For more information on all functionalities please read the instruction manual.

Sequencer Feature

Allows sequential triggering of other products through the remote trigger connection (REM). Use a cable of at least 20 AWG. The sequencer has three outputs (S1, S2, and S3) which are sequentially activated and deactivated according to the input signal from the remote input (REM IN).

The triggering interval between each output can be set from 0s to 4s. When the set time is 0s, all three outputs will be enabled and disabled at the same time after 3s of the input remote (REM IN) signal change.

• PRV DSP 2.8X TEAM enables detailed configurations for 8-Way car audio sound projects, giving you tools such as graphic and parametric equalizations, high-precision crossover filters, time alignment, phase inversion and adjustable limiters.
• 15 Band Graphic Equalization – attenuate or boost up to ± 12 dB per band
• 2 Channel Inputs – A and B – Support 2 different Signal Inputs ( Left and Right Stereo)
• 8 Channel Outputs with Independent Gain, Crossover and Parametric Eq Setting per Channel
• Advanced Controls for Limiter, Phase and Delay Controls per output channel
• 10 Digital Crossover Filters Options for HPF and LPF Settings
• Built-In Remote Out Control ( Sequencer )
• Built-in Tools such as: Tone Generator and Frequency Sweeps

PRV AUDIO Car Audio DSP 2.8X TEAM Digital Crossover and Equalizer 8 Channel Digital Signal Audio Processor DSP with Sequencer Remote Relay – 15-Band Graphic Equalization

GENERAL SPECIFICATIONS

Bringing innovation and technology to the Automotive Sound market, PRV Audio launches the DSP2.8X Digital Signal Processor, capable of making various Real-time signal adjustments, from crossover filters, graphic and parametric equalization, alignment, phase inversion, limiter, audio generator, among others. Enhancing Your Audio System!

Through an LCD display and intuitive interface, it allows real-time audio adjustments. The DSP 2.8X features 2 audio inputs (A and B) and 8 independent outputs and allows you to choose the audio source (A, B or A + B) for each output. It has an integrated equalization system, with 15-band graphic equalizer, manual tuning, or through 12 presets (Flat, Loudness, Bass Boost, Mid Bass, Treble Boost, Powerful, Electronic, Rock, Hip Hop, Pop, Vocal and Pancadão).

For professional equalization adjustments, it has 1 INPUT Parametric Equalizer and 1 OUTPUT Parametric Equalizer with gain control, specific frequency setting, and equalizer bandwidth, allowing fine adjustments and detailed equalization control.
The Crossover function allows you to precisely define the cut frequencies, attenuation rates, and topology of the LowPass and HighPass filters with Butterworth and Linkwitz-Riley filters (12/18/24/36/48 dB / 8ª).

To aid in the protection of amplifiers and loudspeakers, the DSP 2.8X features a Limiter with Dynamic Attack-Release system that dynamically controls the Attack and Release parameters in real-time, providing security and sound fidelity.

In the audio treatment, it also has Alignment capabilities through High Accuracy Delay, Phase Inversion, Independent Gain by Output and Master Level. For accurate measurements and adjustments, the DSP 2.8X features an integrated Audio Generator with tone generation and frequency sweep, and Pink Noise. Configuration Copy functions between output channels.
It also has the functions of Management, Save and Load Settings in memory, Security Password that blocks the editing of the parameters, Marquee / Text Display, and Language Selection.

For more information on all functionality please read the instruction manual.

Sequencer Feature

Allows sequential triggering of other products through the remote trigger connection (REM). Use a cable of at least 20 AWG.  The sequencer has three outputs (S1, S2, and S3) which are sequentially activated and deactivated according to the input signal from the remote input (REM IN).

The triggering interval between each output can be set from 0s to 4s. When the set time is 0s, all three outputs will be enabled and disabled at the same time after 3s of the input remote (REM IN) signal change.

• Number of processors (DSPs): 1
• Input Channels: 2
• Output Channels: 8
• Display: LCD16x2 Characters
• Built-In Remote Out ( Sequencer )

PRV AUDIO Car Audio DSP 2.8X Digital Crossover and Equalizer 8 Channel Digital Signal Audio Processor DSP with Sequencer Remote Relay

GENERAL SPECIFICATIONS

The mini MDX2500.1 2 Ohm delivers 2700 Watts RMS power to its full range 1 channel in a compact, modern amplifier.

Designed for high performance systems that require high power output but have very little space to spare, the MDX Series features exclusive and patented technologies that ensure a high definition sound quality in the most compact and reliable design.

• A small footprint mini heavy duty heatsink make this micro amplifier easy to install anywhere in vehicles, motorcycles, 4-wheelers: Overall 8.50″ Width by 5.90″ Length and only 2.60″ Height.
• Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly.
• 1 Channel 2700 watts at 2 Ohm TRUE RMS certified. Full Range Digital Class D Technology, gives you the benefit of wiring 4 speakers and dividing the power, 675 Watts RMS per 8 Ohm Speaker.
• 4-way protection circuitry features high voltage, low voltage, shortage, and current protection. Built-in Power/Protection/Clip LED indicators on the top panel

The latest technology on surface mount components ensures best performance against vibration and superior sound quality, allowing enthusiasts and competitors to build the system of their dreams

---

Its wide frequency response allows you to use it in many different applications, such as subwoofers, midbass, midrange, full range speakers, phenolic drivers, titanium drivers, and super tweeters, among others.

2700 Watts at 2 Ohm Monoblock full range 10 to 25,000Hz.

The MDX Series is ideal for motorsport applications such as custom motorcycles, ATVs and Slingshots!

---

High Output that takes up little space!

Featuring a mini heavy-duty heatsink, as well as a built-in cooling fan, this amplifier runs cool under even the most demanding playlists.

At only 4.05 lbs allows any custom system to achieve the highest performance and weight ratio possible.

PRV Audio MDX2500.1 2 Ohm MINI 1 Channel Car Audio Amplifier 2700 Watts RMS at 2 Ohm – Full Range High Output Amp

Popular Installation configurations with this amplifier:

1 channel configuration for 8 Ohm components, its high power output channel allow you to install 4x 8 Ohm Speakers, drivers or tweeters in parallel at 2 Ohm, giving up to 675 watts per component.

1 channel configuration for 4 Ohm components, its high power output channel allow you to install 2x 4 Ohm Speakers in parallel at 2 Ohm, giving up to 1350 watts per component.

Before Installing:

You must follow the instructions for the product’s installation to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to equipment.

• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference; Minimum recommended installation distance between amplifier is 1.25”.

• Always use OFC 4 AWG Copper wire for power and ground and minimum of 12 AWG speaker wire and good quality connectors. Copper-clad aluminum wire (CCAW) must not be used. This guarantees reliability and performance.

• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: For this amp use a 150A fuse 12 inches away from the battery as a safety precaution.

The power rating data is based on equipment from the PRV Audio Group laboratory. Rated power tested with 60Hz to 1KHz sinusoidal signal and THD <= 1%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.

PRV Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use.

GENERAL SPECIFICATIONS

The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.

The mini MDX2000.4 2 Ohm delivers 2000 Watts RMS power over 4 channels in a compact, modern amplifier.

Designed for high performance systems that require high power output but have very little space to spare, the MDX Series features exclusive and patented technologies that ensure a high definition sound quality in the most compact and reliable design.

Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly.

• A small footprint mini heavy duty heatsink make this micro amplifier easy to install anywhere in vehicles, motorcycles, 4-wheelers: Overall 9″ Width by 5.90″ Length and only 2.60″ Height.
• 4 x 500 watts at 2 Ohm TRUE RMS certified at full range output Digital Class D Brazilian Technology, gives you the benefit of wiring multiple speakers and dividing the power per channel.
• 2 Channel Bridged – Double the power output to your speakers by bridging two channels. 2x 1000 Watts RMS at a minimum impedance of 4 Ohms per bridged channel.
• The latest technology on surface mount components ensures best performance against vibration and superior sound quality, allowing enthusiasts and competitors to build the system of their dreams

---

Its high power output with its multichannel technology eliminates the need for multiple amplifiers, when you can use this amplifier in 4, 3 or 2 channel configurations.

The MDX Series is ideal for motorsport applications such as custom motorcycles, ATVs and Slingshots!

500 Watts at 2 Ohm per Channel
1000 Watts at 4 Ohm per Bridged Channel

---

High Output that takes up little space!

Featuring a mini heavy-duty heatsink, as well as a built-in cooling fan, this amplifier runs cool under even the most demanding playlists.

At only 3.85 lbs allows any custom system to achieve the highest performance and weight ratio possible.

PRV Audio MDX2000.4 2 Ohm MINI 4 Channel Car Audio Amplifier 4 x 500 Watts RMS at 2 Ohm

Popular Installation configurations with this amplifier

Before Installing:

You must follow the instructions for the product’s installation to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to equipment.

• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference; Minimum recommended installation distance between amplifier is 1.25”.

• Always use OFC 4 AWG Copper wire for power and ground and minimum of 12 AWG speaker wire and good quality connectors. Copper-clad aluminum wire (CCAW) must not be used. This guarantees reliability and performance.

• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: For this amp use a 100A fuse 12 inches away from the battery as a safety precaution.

The power rating data is based on equipment from the PRV Audio Group laboratory. Rated power tested with 60Hz to 1KHz sinusoidal signal and THD <= 1%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.

PRV Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use.

GENERAL SPECIFICATIONS

The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.

The mini MDX2000.2 1 Ohm delivers 2000 Watts RMS power over 2 channels in a compact, modern amplifier.

Designed for high performance systems that require high power output but have very little space to spare, the MDX Series features exclusive and patented technologies that ensure a high definition sound quality in the most compact and reliable design.

Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly.

• A small footprint mini heavy duty heatsink make this micro amplifier easy to install anywhere in vehicles, motorcycles, 4-wheelers: Overall 8.50″ Width by 5.90″ Length and only 2.60″ Height.
• 2 x 1000 watts at 1 Ohm TRUE RMS certified at full range output Digital Class D Brazilian Technology, gives you the benefit of wiring multiple speakers and dividing the power per channel.
• 1 Channel Bridged – Double the power output to your speakers by bridging two channels. 1x 2000 Watts RMS at a minimum impedance of 2 Ohm on bridged channel.
• The latest technology on surface mount components ensures best performance against vibration and superior sound quality, allowing enthusiasts and competitors to build the system of their dreams

---

The ability to choose between 2 or 1 channel configurations is one of this amp’s best features!

Its 1 Ohm channels allow you to install 16x 8 Ohm drivers or tweeters, 8 per channel in parallel, giving out 125 watts per component.

1000 Watts at 1 Ohm per Channel
2000 Watts at 2 Ohm on Bridged Channel

The MDX Series is ideal for motorsport applications such as custom motorcycles, ATVs and Slingshots!

---

High Output that takes up little space!

Featuring a mini heavy-duty heatsink, as well as a built-in cooling fan, this amplifier runs cool under even the most demanding playlists.

At only 4 lbs allows any custom system to achieve the highest performance and weight ratio possible.

PRV Audio MDX2000.2 1 Ohm MINI 2 Channel Car Audio Amplifier 2 x 1000 Watts RMS at 1 Ohm – High Power Stereo Amp

2 Channel Configuration for 8 Ohm Components
Its high power output channels allow you to install 8x 8 Ohm speakers, drivers or tweeters in parallel per channel, giving up to 125 watts per component. 

2 Channel Configuration for 4 Ohm components
Its high power output channels allow you to install 4x 4 Ohm speakers, driver or tweeters in parallel per channel, giving up to 250 watts per component. 

Before Installing:

You must follow the instructions for the product’s installation to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to equipment.

• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference; Minimum recommended installation distance between amplifier is 1.25”.

• Always use OFC 4 AWG Copper wire for power and ground and minimum of 12 AWG speaker wire and good quality connectors. Copper-clad aluminum wire (CCAW) must not be used. This guarantees reliability and performance.

• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: For this amp use a 100A fuse 12 inches away from the battery as a safety precaution.

The power rating data is based on equipment from the PRV Audio Group laboratory. Rated power tested with 60Hz to 1KHz sinusoidal signal and THD <= 1%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.

PRV Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use.

GENERAL SPECIFICATIONS

The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.

The mini MDX1800.1 1 Ohm delivers 1800 Watts RMS power to its full range 1 channel in a compact, modern amplifier.

Designed for high performance systems that require high power output but have very little space to spare, the MDX Series features exclusive and patented technologies that ensure a high definition sound quality in the most compact and reliable design.

• A small footprint mini heavy duty heatsink make this micro amplifier easy to install anywhere in vehicles, motorcycles, 4-wheelers: Overall 6.60″ Width by 5.90″ Length and only 2.60″ Height.
• Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly.
• 1 Channel 1800 watts at 1 Ohm TRUE RMS certified. Full Range Digital Class D Technology, gives you the benefit of wiring 8 speakers and dividing the power, 225 Watts RMS per 8 Ohm Speaker.
• 4-way protection circuitry features high voltage, low voltage, shortage, and current protection. Built-in Power/Protection/Clip LED indicators on the top panel

---

The latest technology on surface mount components ensures best performance against vibration and superior sound quality, allowing enthusiasts and competitors to build the system of their dreams

Its wide frequency response allows you to use it in many different applications, such as subwoofers, midbass, midrange, full range speakers, phenolic drivers, titanium drivers, and super tweeters, among others.

1800 Watts at 1 Ohm Monoblock full range 10 to 25,000Hz.
The MDX Series is ideal for motorsport applications such as custom motorcycles, ATVs and Slingshots!

---

High Output that takes up little space!

Featuring a mini heavy-duty heatsink, as well as a built-in cooling fan, this amplifier runs cool under even the most demanding playlists.

At only 2.85lbs allows any custom system to achieve the highest performance and weight ratio possible.

PRV Audio MDX1800.1 1 Ohm MINI 1 Channel Car Audio Amplifier 1800 Watts RMS at 1 Ohm – Full Range Ultra Compact Amp

Popular Installation configurations with this amplifier:

1 Channel Configuration for 8 Ohm Components
Its high power output channel allow you to install 8x 8 Ohm Speakers, drivers or tweeters in parallel at 1 Ohm, giving up to 225 watts per component.

Before Installing:

You must follow the instructions for the product’s installation to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to equipment.

• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference; Minimum recommended installation distance between amplifier is 1.25”.

• Always use OFC 4 AWG Copper wire for power and ground and minimum of 12 AWG speaker wire and good quality connectors. Copper-clad aluminum wire (CCAW) must not be used. This guarantees reliability and performance.

• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: For this amp use a 100A fuse 12 inches away from the battery as a safety precaution.

The power rating data is based on equipment from the PRV Audio Group laboratory. Rated power tested with 60Hz to 1KHz sinusoidal signal and THD <= 1%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.

PRV Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use.

GENERAL SPECIFICATIONS

The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.

The mini MDX1200.4 1 Ohm delivers 1200 Watts RMS power over 4 channels in a compact, modern amplifier.

Designed for high performance systems that require high power output but have very little space to spare, the MDX Series features exclusive and patented technologies that ensure a high definition sound quality in the most compact and reliable design.

Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly.

• A small footprint mini heavy duty heatsink make this micro amplifier easy to install anywhere in vehicles, motorcycles, 4-wheelers: Overall 6.75″ Width by 5.90″ Length and only 2.60″ Height.
• 4 x 300 watts at 1 Ohm TRUE RMS certified at full range output Digital Class D Brazilian Technology, gives you the benefit of wiring multiple speakers and dividing the power per channel.
• 2 Channel Bridged – Double the power output to your speakers by bridging two channels. 2x 600 Watts RMS at a minimum impedance of 2 Ohms per bridged channel.
• The latest technology on surface mount components ensures best performance against vibration and superior sound quality, allowing enthusiasts and competitors to build the system of their dreams

---

Its high power output with its multichannel technology eliminates the need for multiple amplifiers, when you can use this amplifier in 4, 3 or 2 channel configurations.

The MDX Series is ideal for motorsport applications such as custom motorcycles, ATVs and Slingshots!

300 Watts at 1 Ohm per Channel
600 Watts at 2 Ohm per Bridged Channel

---

High Output that takes up little space!

Featuring a mini heavy-duty heatsink, as well as a built-in cooling fan, this amplifier runs cool under even the most demanding playlists.

At only 2.75 lbs allows any custom system to achieve the highest performance and weight ratio possible.

PRV Audio MDX1200.4 1 Ohm MINI 4 Channel Car Audio Amplifier 4 x 300 Watts RMS at 1 Ohm – Ultra Compact Stereo Amp

Popular Installation configurations with this amplifier:

Before Installing:

You must follow the instructions for the product’s installation to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to equipment.

• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference; Minimum recommended installation distance between amplifier is 1.25”.

• Always use OFC 4 AWG Copper wire for power and ground and minimum of 12 AWG speaker wire and good quality connectors. Copper-clad aluminum wire (CCAW) must not be used. This guarantees reliability and performance.

• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: For this amp use a 60A fuse 12 inches away from the battery as a safety precaution.

The power rating data is based on equipment from the PRV Audio Group laboratory. Rated power tested with 60Hz to 1KHz sinusoidal signal and THD <= 1%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.

PRV Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use.

GENERAL SPECIFICATIONS

The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.

The mini MDX1200.2 1 Ohm delivers 1200 Watts RMS power over 2 channels in a compact, modern amplifier.

Designed for high performance systems that require high power output but have very little space to spare, the MDX Series features exclusive and patented technologies that ensure a high definition sound quality in the most compact and reliable design.

Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly.

• A small footprint mini heavy duty heatsink makes this micro amplifier easy to install anywhere in vehicles, motorcycles, 4-wheelers: Overall 6.50″ Width by 5.90″ Length and only 2.60″ Height.
• 2 x 600 watts at 1 Ohm TRUE RMS certified at full range output Digital Class D Brazilian Technology, gives you the benefit of wiring multiple speakers and dividing the power per channel.
• 1 Channel Bridged – Double the power output to your speakers by bridging two channels. 1x 1200 Watts RMS at a minimum impedance of 2 Ohm on bridged channel.
• The latest technology on surface mount components ensures best performance against vibration and superior sound quality, allowing enthusiasts and competitors to build the system of their dreams.

---

The ability to choose between 2 or 1 channel configurations is one of this amp’s best features!

The MDX Series is ideal for motorsport applications such as custom motorcycles, ATVs and Slingshots!

Its 1 Ohm channels allow you to install 16x 8 Ohm drivers or tweeters, 8 per channel in parallel, giving out 75 watts per component.

600 Watts at 1 Ohm per Channel
1200 Watts at 2 Ohm on Bridged Channel

---

High Output that takes up little space!

Featuring a mini heavy-duty heatsink, as well as a built-in cooling fan, this amplifier runs cool under even the most demanding playlists.

Speaker wire converter built-in, the HIGH LEVEL INPUT makes it easy to add this amplifier to any factory radio.

At only 2.70 lbs allows any custom system to achieve the highest performance and weight ratio possible.

PRV Audio MDX1200.2 1 Ohm MINI 2 Channel Car Audio Amplifier 2 x 600 Watts RMS at 1 Ohm – Ultra Compact Stereo Amp

Popular Installation configurations with this amplifier:

Before Installing:

You must follow the instructions for the product’s installation to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to equipment.

• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference; Minimum recommended installation distance between amplifier is 1.25”.

• Always use OFC 4 AWG Copper wire for power and ground and minimum of 14 AWG speaker wire and good quality connectors. Copper-clad aluminum wire (CCAW) must not be used. This guarantees reliability and performance.

• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: For this amp use a 60A fuse 12 inches away from the battery as a safety precaution.

The power rating data is based on equipment from the PRV Audio Group laboratory. Rated power tested with 60Hz to 1KHz sinusoidal signal and THD <= 1%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.

PRV Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use.

GENERAL SPECIFICATIONS

The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.

The QS Series amplifiers are designed for mids and highs applications, to power high power stuntwalls, custom door panels or any large system that requires clearer, louder sound for PRO Audio loudspeakers.

• UNMATCHED PERFORMANCE: Digital Class D Brazilian Technology, 9000 watts TRUE RMS certified at full range output, provides outstanding results for demo car audio systems.
• 1 Channel car audio amplifier stable at 1 Ohm gives you the benefit of wiring multiple speakers and dividing the power.
• HIGH EFFICIENCY: Engineered to be the most efficient full range amplifier so that you can get the most out of your vehicle’s electrical system!
• A small footprint and compact chassis make this amplifier easy to install anywhere in the vehicle: 20″ Wide x 10.25″ Length x 3.00″ Height
• 4-way protection circuitry features high voltage, low voltage, shortage, and current protection. Built-in Power/Protection/Clip LED indicators on the top panel.

Channels	1 Channel
Rated RMS Power at 14.0 V at 1 Ohm	9000 Watts
Rated RMS Power at 14.0 V at 2 Ohm	6400 Watts

---

High Power Amplifier for your custom car audio system. The QS series brings the best Full Range HD Sound for clearer, louder sound for PRO Audio loudspeakers

The Perfect amplifier for 8x 12” loudspeakers – QS9000 at 1 Ohm Stable, also available at 2 Ohm.

Its wide frequency response allows you to use it in many different applications, such as woofers, midbass, midrange speakers, among others. This amplifier is the perfect solution for large car audio systems.

---

Built-in HIGH and LOW pass filters allow the user to set the right frequency range for his equipment, from deep bass all the way to high frequencies.

Premium tiffany style RCA inputs ensure a more secure and tight connection, preventing any vibration problems.

This proprietary heat dissipation design will ensure a high air flow cooling fans controls its temperature to run cool on the most demanding playlists.

---

The LED indicator is a simple built-in tool that allows you to easily monitor the status of your amplifier while it is in use.

Its clipping indicator flashes at the limit of its maximum power output without any distortion, providing excellent sound performance while giving you the best value! All are protected by four-stage intelligent protection circuitry.

---

PRV Audio QS9000 1 Ohm Compact 1 Channel Car Audio Amplifier 9000 Watts RMS at 1 Ohm – Full Range Amp

Popular Installation configurations with this amplifier: 

1 Channel Configuration for 8 Ohm ComponentsIts high power output channel allows you to install 8x 8 Ohm Speakers in parallel at 1 Ohm, giving up to 1125 watts per component.

---

Before Installing:

Before connecting your amplifier review all recommendations thoroughly, Any connection to the amplifier input or output must be performed only when the amplifier is OFF.

• The gauge of the power supply wiring is extremely important to reach the desired amplifier output and for the amplifier’s safety. Not using the recommended wire gauge will result in power loss and overheating of cables. It is important that the power supply cables are the shortest possible length. Always use 100% Copper cables and good quality connectors. This guarantees the sound’s quality and fidelity; To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a fuse 12 inches away from the battery as a safety precaution

• Keep all cables as far away as possible from the ignition cables, electronic injection modules, and starter switch since they may cause noise interference

• In order to avoid interference, the signal cables ( RCA) must be kept away from the original wiring of the vehicle and from any other power supply cable.

• Amplifier must be installed in a solid and ventilated area. Do not mount amplifier to the back of a subwoofer box; excess vibration may cause damage to the amplifier.

The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 100Hz to 1kHz with THD+N to ≤1 % in impedance referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.

PRV Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use.

GENERAL SPECIFICATIONS

Impedance	1 Ohm
Channels	1 Channel
Rated RMS Power at 14.0 V at 1 Ohm	9000 Watts
Rated RMS Power at 14.0 V at 2 Ohm	6400 Watts
Average Efficiency	77%
Operating Voltage	9 to 16 Volts
Musical Current Draw	480 A
Minimum Power Wire Input	(OFC) 0 Gauge
Protection Fuse or Circuit Breaker	500 Amps
Minimum Speaker Wire Output	Dual 12 Gauge
Frequency Response(-3dB)	20 – 15,000 Hz
Min. Input Sensitivity for Max. Output	200 mV
Signal Input	1 Pair RCA
Signal to Noise	>90 dB
Protection System	Low & High Supply Voltage / Shortage on Output / Low Impedance on Output
Heat Sink Type	Heavy Duty Cast Aluminum
Dimensions ( W x D x H )	20″ x 10.25″ x 3″
Weight	16.30 Lbs

The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.

The QS Series amplifiers are designed for mids and highs applications, to power high power stuntwalls, custom door panels or any large system that requires clearer, louder sound for PRO Audio loudspeakers.

• UNMATCHED PERFORMANCE: Digital Class D Brazilian Technology, 7000 watts TRUE RMS certified at full range output, provides outstanding results for demo car audio systems.
• 1 Channel car audio amplifier stable at 1 Ohm gives you the benefit of wiring multiple speakers and dividing the power.
• HIGH EFFICIENCY: Engineered to be the most efficient full range amplifier so that you can get the most out of your vehicle’s electrical system!
• A small footprint and compact chassis make this amplifier easy to install anywhere in the vehicle: 17.25″ Wide x 10.25″ Length x 3.00″ Height
• 4-way protection circuitry features high voltage, low voltage, shortage, and current protection. Built-in Power/Protection/Clip LED indicators on the top panel.

Channels	1 Channel
Rated RMS Power at 14.0 V at 1 Ohm	7000 Watts
Rated RMS Power at 14.0 V at 2 Ohm	4400 Watts

---

High Power Amplifier for your custom car audio system. The QS series brings the best Full Range HD Sound for clearer, louder sound for PRO Audio loudspeakers

The Perfect amplifier for 8x 10” loudspeakers – QS7000 at 1 Ohm Stable, also available at 2 Ohm.

Its wide frequency response allows you to use it in many different applications, such as woofers, midbass, midrange speakers, among others. This amplifier is the perfect solution for large car audio systems.

---

Built-in HIGH and LOW pass filters allow the user to set the right frequency range for his equipment, from deep bass all the way to high frequencies.

Premium tiffany style RCA inputs ensure a more secure and tight connection, preventing any vibration problems.

This proprietary heat dissipation design will ensure a high air flow cooling fans controls its temperature to run cool on the most demanding playlists.

---

The LED indicator is a simple built-in tool that allows you to easily monitor the status of your amplifier while it is in use.

Its clipping indicator flashes at the limit of its maximum power output without any distortion, providing excellent sound performance while giving you the best value! All are protected by four-stage intelligent protection circuitry.

---

PRV Audio QS7000 1 Ohm Compact 1 Channel Car Audio Amplifier 7000 Watts RMS at 1 Ohm – Full Range Amp

Popular Installation configurations with this amplifier:

1 Channel Configuration for 8 Ohm ComponentsIts high power output channel allows you to install 8x 8 Ohm Speakers or drivers in parallel at 1 Ohm, giving up to 875 watts per component.

1 Channel Configuration for 4 Ohm componentsIts high power output channel allows you to install 4x 4 Ohm Speakers in parallel at 1 Ohm, giving up to 1750 watts per component

---

Before Installing:

Before connecting your amplifier review all recommendations thoroughly, Any connection to the amplifier input or output must be performed only when the amplifier is OFF.

• The gauge of the power supply wiring is extremely important to reach the desired amplifier output and for the amplifier’s safety. Not using the recommended wire gauge will result in power loss and overheating of cables. It is important that the power supply cables are the shortest possible length. Always use 100% Copper cables and good quality connectors. This guarantees the sound’s quality and fidelity; To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a fuse 12 inches away from the battery as a safety precaution

• Keep all cables as far away as possible from the ignition cables, electronic injection modules, and starter switch since they may cause noise interference

• In order to avoid interference, the signal cables ( RCA) must be kept away from the original wiring of the vehicle and from any other power supply cable.

• Amplifier must be installed in a solid and ventilated area. Do not mount amplifier to the back of a subwoofer box; excess vibration may cause damage to the amplifier.

The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 100Hz to 1kHz with THD+N to ≤1 % in impedance referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.

PRV Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use.

GENERAL SPECIFICATIONS

Impedance	1 Ohm
Channels	1 Channel
Rated RMS Power at 14.0 V at 1 Ohm	7000 Watts
Rated RMS Power at 14.0 V at 2 Ohm	4400 Watts
Average Efficiency	78%
Operating Voltage	9 to 16 Volts
Musical Current Draw	380 A
Minimum Power Wire Input	(OFC) 0 Gauge
Protection Fuse or Circuit Breaker	400 Amps
Minimum Speaker Wire Output	12 Gauge
Frequency Response(-3dB)	20 – 15,000 Hz
Min. Input Sensitivity for Max. Output	200 mV
Signal Input	1 Pair RCA
Signal to Noise	>90 dB
Protection System	Low & High Supply Voltage / Shortage on Output / Low Impedance on Output
Heat Sink Type	Heavy Duty Cast Aluminum
Dimensions ( W x D x H )	17.25″ x 10.25″ x 3″
Weight	13.90 Lbs

The power rated data are based on equipment from the PRV Audio Group laboratory. Frequency reference of 60Hz to 1kHz with THD+N to ≤1 % in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications (with speakers), any load test (resistant load) is not recommended.