For a countless number of applications that require high output sound in small locations where conventional drivers wouldn’t fit, we have carefully blended a super tweeter with our PRO Audio shallow midrange speaker in a compact package.

This is the greatest 6.5″ 2-way coaxial for car audio you can find that is both small and loud.

Slim Design – Perfect for tight space applications that require PRO Audio sound quality in small areas where conventional drivers wouldn’t fit.
Built-in driver tweeter with in-line capacitor attenuates perfectly with the speaker, giving you a rich musical response.
380 Watts RMS Music Power Handling, with a 96 dB Sensitivity, capable of generating a lot sound with a small cone!
Grill and Mounting Screws Included
Also available in 8″- 8CX380-4 SLIM and 6×9″- 69CX380-4 SLIM

By combining elements from the PRO Audio and Car Audio segments, we have developed a new type of highly efficient coaxial that is able to give high levels of output in compact spaces.

Its slim design makes this coaxial the perfect speaker, allowing it to be utilized in endless ways.

Loud and clear vocals are all within 2.76′′ of mounting depth without sacrificing quality or performance.

Its specially composed spider reduces distortion on midbass frequencies, and its double roll surround keeps cone travel linear, while its premium tinsel lead wire is capable of high temperatures.

This makes this speaker not only unique but also gives it all high-performance characteristics and high-quality components, providing exceptional clarity, detail, and dynamic sound.

PRV Audio 6.5” Full Range 2-Way Coaxial 6CX380-4 Car Speaker 380 Watts 4 Ohm – High Output PRO Audio Sound
Recommended Amplifier configurations and crossover HPF using PRV Digital Signal Processor DSP when using the recommended power below:

Low Power Stereo Setup, One Speaker per Channel, no LPF.
2 Speakers – 1x QS800.4 2 Ohm, 1 speaker per channel in the front Channel
• Amplifier HPF at 90 Hz with 140 Watts RMS musical power
Other 2 Rear Channels can be used for the speakers for the Front Setup

High Power Stereo Setup, One Speaker per Channel
2 Speakers – 1x MDX1200.2 2 Ohm, 1 or 2 speakers per channel
• 120 Hz at 18 dB per octave filter Crossover / BT18, no LPF
when using up to 380 Watts RMS musical power

Custom System, High Power
4 Speakers – 1x MDX1800.1 1 Ohm, 4 speakers in parallel
• 120 Hz at 18 dB per octave filter Crossover / BT18, no LPF
when using up to 380 Watts RMS musical power

GENERAL SPECIFICATIONS

Nominal and Throat Diameter	Low Freq. 6.5″ (152 mm)	High Freq. 1″ (25.4mm)
Nominal impedance	4 Ohm
Nominal Power Handling*	190 Watts
Continuous Program Power (RMS)**	380 Watts
Max Peak Power***	760 Watts
Sensitivity 2.00V at 1m	96 dB
Recommended Hi Pass Crossover For Full Power Handling	120 Hz 12db Per Octave Crossover
Frequency Response	100 – 20,000Hz
Voice Coil Diameter	1.5″ (38 mm)	1.0″(25mm)
Voice Coil Wire	Copper	CCAW
Voice Coil Winding Depth	8.0 mm	N/A
Former Material	Kapton	Kapton
Magnetic Gap Depth	5.0 mm	N/A
Frame Material	S. Steel	Mylar

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	6.61 l
Excursion (mathematical)***	Xmax	2.75 mm
Free Air Resonance	Fs	111.7 Hz
Mechanical Factor	Qms	8.6
Electrical Factor	Qes	0.84
Total Factor	Qts	0.77
Cone Area	Sd	143 cm²
Mechanical Mass	Mms	8.77 g
Bl Factor	Bl	5.11 Tm
Dc Resistance	Re	3.6 Ohms
Inductance	Le	0.113 mH at 1 kHz
Mechanical Mass Without Air	Mmd	7.80 g
Mechanical Compliance	Cms	0.231 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.5″ (165 mm)
Front Mount Baffle Cutout	5.67″ (144 mm)
Mounting Depth	2.76″ (70 mm)
Overall Depth	3.86″ (98 mm)(with grill)
Net Weight	3.85 Lbs (1.75 kg)
Shipping Weight	4.30 Lbs (1.95 kg)
Carton Dimensions W x L x H	7.28″ x 7.48″ x 4.92″ (185 x 190 x 125 mm)

• Seal back basket simplifies cabinet manufacture, eliminating the need for a separate enclosure for other speakers.
• Very compact model with only 2.20″ of mounting depth, suitable for use in 3-way cabinet systems ( Midbass + Seal Basket + High Frequency Driver or Tweeter).
• Optimized to deliver detailed reproduction of mid-range frequencies from 400Hz to 6,000Hz.

A light paper cone is mated to a 1.5″ voice coil for great sensitivity and a 250 watts power handling. A durable spider suspension, woven cloth surround, and stamped steel frame are combined for durability over many hours of use.

Cabinet builders gravitate towards this driver for use in their systems when looking for a lightweight seal basket midrange.

Using a closed basket design in a speaker like the 6MR250SEAL offers several advantages. Firstly, it prevents interference from a woofer or midbass in a small Hi-Fi cabinet, resulting in a cleaner and more accurate midrange response.

Additionally, the closed basket design contributes to a smooth punch of midbass and midrange, enhancing the overall audio performance of the speaker.

PRV 6.5″ Midrange PRO Audio Speaker 6MR250SEAL Sealed Basket / 8 Ohm

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	125 Watts
Continuous Program Power (RMS)	250 Watts
Max Peak Power	500 Watts
Sensitivity 2.83V at 1m	95 dB
Recommended Hi Pass Crossover** **For Full Power Handling	400 Hz** **12db Per Octave Crossover
Frequency Response at -10DB	400 – 6,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	6.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	0.46 l
Excursion (mathematical)***	Xmax	2.50 mm
Free Air Resonance	Fs	387.4 Hz
Mechanical Factor	Qms	23.17
Electrical Factor	Qes	2.80
Total Factor	Qts	2.50
Cone Area	Sd	139 cm²
Mechanical Mass	Mms	9.80 g
Bl Factor	Bl	6.84 Tm
Dc Resistance	Re	5.5 Ohm
Inductance	Le	0.19 mH at 1 kHz
Mechanical Mass Without Air	Mmd	8.87 g
Mechanical Compliance	Cms	0.017 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.58″ ( 167.2mm)
Front Mount Baffle Cutout	5.79″ (147 mm)
Mounting Depth	2.20″ (56 mm)
Overall Depth	3.47″ (62.7 mm)
Net Weight	3.88 Lbs (1.76 kg)
Shipping Weight	4.32 Lbs (1.96 kg)
Carton Dimensions W x L x H	7.09″ x 7.09″ x 3.14″ (180 x 180 x 80 mm)

• A deep midbass response along with a strong vocal response
• Outstanding durability and strong impactful midbass for a car stereo
• Natural paper cone and double-roll surround for smooth response
• Handles 200 Watts, guaranteeing endurance at loudest volumes
• Impressive choice for car audio systems – 4 Ohm impedance also available in 8 Ohm

The 6MB200 v2 now has a more extended midrange response, up to 6.5 kHz giving it clean vocals. Loud and clear vocals all within 2.60″ of mounting depth without sacrificing quality and performance.

The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment.

Its light weight of only 3.3 Lbs helps to keep your enclosure light, making it perfect for custom door panels.

PRV Audio 6.5” Car Speaker 6MB200-4 Midbass 200 Watts 4 Ohm – High Output PRO Audio

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	4 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.00V at 1m	93.5 dB
Recommended Hi Pass Crossover* *For Full Power Handling	125 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	125 – 6,500 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	12.5 mm
Former Material	Kapton
Magnetic Gap Depth	5.8 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	3.97 l
Excursion (mathematical)***	Xmax	4.80 mm
Free Air Resonance	Fs	123.79 Hz
Mechanical Factor	Qms	20.84
Electrical Factor	Qes	1.02
Total Factor	Qts	0.97
Cone Area	Sd	154 cm²
Mechanical Mass	Mms	11.89 g
Bl Factor	Bl	5.79 Tm
Dc Resistance	Re	3.7 Ohms
Inductance	Le	0.18 mH at 1 kHz
Mechanical Mass Without Air	Mmd	10.92 g
Mechanical Compliance	Cms	0.139 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.53″ (166 mm)
Front Mount Baffle Cutout	5.63″ (143 mm)
Mounting Depth	2.6″ (66 mm)
Overall Depth	2.91″ (74 mm)
Net Weight	3.30 Lbs (1.50 kg)
Shipping Weight	3.62 Lbs (1.64 kg)
Carton Dimensions W x L x H	7.17″ x 7.17″ x 4.13″ (182 x 182 x 105 mm)

• A deep midbass response along with a strong vocal response
• Outstanding durability and strong impactful midbass even in small enclosures
• Natural paper cone and double-roll surround for smooth response
• Handles 200 Watts, guaranteeing endurance at loudest volumes
• Impressive choice for high output home, car, and professional audio systems – 8 Ohm impedance also available in 4 Ohm

The 6MB200 v2 now has a more extended midrange response, up to 6.5 kHz giving it clean vocals. A perfect option for mid bass speaker replacements in three-way cabinets. The Perfect speaker for TUKUTEO® sound.

The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment.

Its light weight of only 3.3 Lbs helps to keep your enclosure light, making it perfect for portable audio applications.

PRV Audio 6.5” PRO Audio Midbass 6MB200 Loudspeaker 200 Watts 8 Ohm – Professional Woofer

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.00V at 1m	93.5 dB
Recommended Hi Pass Crossover* *For Full Power Handling	125 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	125 – 6,500 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	12.5 mm
Former Material	Kapton
Magnetic Gap Depth	5.8 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	4.13 l
Excursion (mathematical)***	Xmax	4.80 mm
Free Air Resonance	Fs	123.28 Hz
Mechanical Factor	Qms	20.81
Electrical Factor	Qes	1.20
Total Factor	Qts	1.13
Cone Area	Sd	154 cm²
Mechanical Mass	Mms	11.57 g
Bl Factor	Bl	7.05 Tm
Dc Resistance	Re	6.7 Ohms
Inductance	Le	0.25 mH at 1 kHz
Mechanical Mass Without Air	Mmd	10.55 g
Mechanical Compliance	Cms	0.144 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.53″ (166 mm)
Front Mount Baffle Cutout	5.63″ (143 mm)
Mounting Depth	2.6″ (66 mm)
Overall Depth	2.91″ (74 mm)
Net Weight	3.30 Lbs (1.50 kg)
Shipping Weight	3.62 Lbs (1.64 kg)
Carton Dimensions W x L x H	7.17″ x 7.17″ x 4.13″ (182 x 182 x 105 mm)

• 6.5″ Car audio midrange speaker designed for Low Frequencies with shallow profile
• 200 watts RMS program power gives capability of high acoustical output with small amplifier
• Impressive choice for high output, car audio, and custom systems – 4 Ohm Impedance
• Smooth response through the mid-bass and vocal range at at loudest volumes

To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.

The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.

This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.

PRV 6.5″ Midrange Car Speaker 6MR200A-4 200 Watts / 4 Ohm PRO Loudspeaker

GENERAL SPECIFICATIONS

Nominal Diameter	6.5″ (165 mm)
Nominal impedance	4 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.00V at 1m	94 dB
Recommended Hi Pass Crossover* *For Full Power Handling	150 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	155 – 11,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	5.5 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	3.89 l
Excursion (mathematical)***	Xmax	2.62 mm
Free Air Resonance	Fs	138.3 Hz
Mechanical Factor	Qms	9.47
Electrical Factor	Qes	1.08
Total Factor	Qts	0.97
Cone Area	Sd	137 cm²
Mechanical Mass	Mms	8.89 g
Bl Factor	Bl	4.92 Tm
Dc Resistance	Re	3.4 Ohm
Inductance	Le	0.18 mH at 1 kHz
Mechanical Mass Without Air	Mmd	7.98 g
Mechanical Compliance	Cms	0.149 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.59″ (167.5 mm)
Front Mount Baffle Cutout	5.69″ (144.5 mm)
Mounting Depth	2.24″ (57 mm)
Overall Depth	2.50″ (63.5 mm)
Net Weight	3.52 Lbs (1.60 kg)
Shipping Weight	3.79 Lbs (1.75 kg)
Carton Dimensions W x L x H	7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm)

• 6.5″ PRO audio Midrange speaker designed for Low Frequencies with shallow profile
• 200 watts RMS program power gives capability of high acoustical output with small amplifier
• Impressive choice for high output home, car, and professional audio systems – 8 Ohm Impedance
• Smooth response through the mid-bass and vocal range at at loudest volumes

To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.

The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.

This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.

PRV 6.5″ Midrange Speaker 6MR200A 200 Watts / 8 Ohm PRO Audio Loudspeaker

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohms
Rated AES Power Handling (RMS)	100 Watts
Program Power	200 Watts
Sensitivity 2.83V at 1m	94 dB
Recommended Hi Pass Crossover* *For Full Power Handling	150 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	155 – 11,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	5.5 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	3.16 l
Excursion (mathematical)***	Xmax	2.62 mm
Free Air Resonance	Fs	114.1 Hz
Mechanical Factor	Qms	13.16
Electrical Factor	Qes	1.28
Total Factor	Qts	1.17
Cone Area	Sd	137 cm²
Mechanical Mass	Mms	10.1 g
Bl Factor	Bl	6.27 Tm
Dc Resistance	Re	5.5 Ohms
Inductance	Le	0.26 mH at 1 kHz
Mechanical Mass Without Air	Mmd	9.02 g
Mechanical Compliance	Cms	0.120 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.59″ (167.5 mm)
Front Mount Baffle Cutout	5.69″ (144.5 mm)
Mounting Depth	2.24″ (57 mm)
Overall Depth	2.5″ (63.5 mm)
Net Weight	3.52 Lbs (1.60 kg)
Shipping Weight	3.79 Lbs (1.75 kg)
Carton Dimensions W x L x H	7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm)

 

• True full-range response ( 80 – 20,000Hz ) makes it easy to add midrange and high frequency to any system
• Impressive choice for a compact, high output home, car, and professional audio systems – 8 Ohm impedance
• 92.5 dB – High efficiency, you do not need a lot of power to achieve extreme SPL levels
• Dual Cone Full Range Loudspeaker – Secondary “whizzer” cone improves high frequency response

The dual cone setup maximizes sound clarity. The primary cone handles lows to midrange frequencies while the smaller whizzer cone increases high-frequency response, yet it still has a wide frequency range, 80Hz to 20,000Hz, despite its small size.

In addition to delivering superior performance across a wide range of frequencies, its innovative design sets it apart from traditional speakers.

These full-range speakers are focused on a combination of a small motor with a copper ring and an unique whizzer cone with a woven-cloth dust cap which provides exceptional clarity, deep mid-bass, high detail, and dynamics at high sensitivity.

Great option for car audio systems and simple portable speaker designs. Whether you’re a DIY audio enthusiast or a professional sound engineer, the FR series is the go-to choice for any audio project that demands exceptional sound quality and clarity all from a single speaker.

PRV Audio 6.5″ Fullrange Speaker 6FR200 PRO Audio Loudspeaker 200 Watts / 8 Ohm

Recommended HPF using PRV Digital Signal Processor DSP when using up to 200 Watts RMS musical power ( without clipping )

• 85 Hz at 12 dB per octave filter Crossover / BT12
• 70 Hz at 18 dB per octave filter Crossover / BT18

We do not recommend using a LPF at low power to take advantage of its high frequency response.

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.83V at 1m	92.5 dB
Recommended Hi Pass Crossover** **For Full Power Handling	85 Hz** **12db Per Octave Crossover
Frequency Response	80 – 20,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	10.0 mm
Former Material	Kapton
Magnetic Gap Depth	6.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.} 

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	6.93 l
Excursion (mathematical)***	Xmax	3.50 mm
Free Air Resonance	Fs	111.7 Hz
Mechanical Factor	Qms	15.69
Electrical Factor	Qes	1.40
Total Factor	Qts	1.29
Cone Area	Sd	143 cm²
Mechanical Mass	Mms	8.37 g
Bl Factor	Bl	5.17 Tm
Dc Resistance	Re	6.4 Ohms
Inductance	Le	0.264 mH at 1 kHz
Mechanical Mass Without Air	Mmd	7.40 g
Mechanical Compliance	Cms	0.242 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.55” (166.5 mm)
Front Mount Baffle Cutout	5.73” (145.5 mm)
Mounting Depth	2.81” (71.5 mm)
Overall Depth	3.09” (78.5 mm)
Net Weight	2.78 Lbs (1.27 kg)
Shipping Weight	3.08 Lbs (1.4 kg)
Carton Dimensions W x L x H	6.89” x 6.89” x 3.74” (175 x 175 x 95 mm)

 

The 6MB100-4 speakers can be used to transform a stock system into a concert level experience without cutting up interior panels. The shallow mounting depth of 2.32″ is designed for easier installation with its standard frame size that fits in many OEM speaker locations. Their standard frame size ensures compatibility with numerous OEM speaker locations.

• Under 2.32″ (60 mm) mounting depth, with compact diameter magnet motor
• Broad 90 – 10,000 Hz frequency range for ultimate flexibility
• Nominal Impedance: 4 Ohms – perfect to install from radio outputs
• Power handling: 200 Watts RMS per Pair
• Sensitivity (1W/1m): 90 dB – Improvement over most stock car audio speakers

These Pro Audio On Wheels ® speakers will handle 200 Watts RMS power able to response on a wide frequency range 90 – 10,000 Hz at an excellent sensitivity of 90dB. This PA Style speaker is a great upgrade for listeners wanting to go well beyond the standard factory upgrade.

We have ingeniously merged the realms of PRO audio and high-fidelity audio to create a groundbreaking driver, meticulously designed to achieve elevated levels of pristine output while seamlessly fitting within stock speaker locations.

6.5″ Midbass Speakers 6MB100-4 – 200 Watts PAIR of factory replacement 4 Ohm Car Speakers

GENERAL SPECIFICATIONS

Nominal Diameter	6.5″ (165 mm)
Nominal impedance	4 Ohm
Nominal Power Handling*	50 Watts each
Continuous Program Power (RMS)**	100 Watts each
Max Peak Power***	200 Watts each
Sensitivity 2.00V at 1m	90 dB
Recommended Hi Pass Crossover For Full Power Handling	90 Hz 12db Per Octave Crossover
Frequency Response	90 – 10,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	5.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	7.22 l
Excursion	Xmax***	2.75 mm
Free Air Resonance	Fs	93.2 Hz
Mechanical Factor	Qms	5.75
Electrical Factor	Qes	1.37
Total Factor	Qts	1.10
Cone Area	Sd	143 cm²
Mechanical Mass	Mms	11.53 g
Bl Factor	Bl	4.33 Tm
Dc Resistance	Re	3.8 Ohm
Inductance	Le	0.22 mH at 1 kHz
Mechanical Mass Without Air	Mmd	10.55 g
Mechanical Compliance	Cms	0.252 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.54″ (166 mm)
Front Mount Baffle Cutout	5.60″ (142 mm)
Mounting Depth	2.32″ (59 mm)
Overall Depth	2.55″ (64.7 mm)
Net Weight	2.09 Lbs (0.95 kg) each
Shipping Weight	4.89 Lbs (2.22 kg) Pair
Carton Dimensions W x L x H	7.08″ x 14.56″ x 3.1″ (180 x 370 x 80 mm)

The MD series is our premium PRO Audio loudspeaker line, built as a professional midrange; combining high power handling, great sound output, and reliability. This 6.5′′ mid range speaker is designed to provide the best performance to price value in the industry, standing out as a great value for professional, high output live sound systems and car audio applications.

• POWER YOU CAN RELY ON: Can handle up to 600 Watts Max power and continuous 200 Watts RMS, able to deliver tremendous amount of sound output
• GREAT FOR: Custom sound systems designed for high output with high power amplifiers – 3-Way systems ( Subwoofer, Speaker & Tweeter )
• QUALITY YOU CAN TRUST: Wide Frequency Response of 145 – 9,000 Hz provides the cleanest and most detailed vocal and sound reproduction.
• LATEST TECHNOLOGY: High efficiency allows, more output and high-impact sound

Designated at 8 Ohm impedance to work great with our high power amplifiers, where you can install multiple speakers on a single system amplifier, you can easily wire 8x speakers in parallel to a TPT-3000 at 1ohm. Taking your custom system to the maximum output level, where you can drive with the windows down and still have your music heard over down on the block.

With this collection of reliable parts, a high-temperature voice coil, and a high-strength motor, we believe we have found the sweet spot in terms of pricing and specifications in the pro audio industry. We bring to you a suitable option to upgrade your system to a high level of performance and SPL output at a reasonable price.

Specs:
600 Watts Max Power
200 Watts RMS Power
Impedance: 8 Ohm
Sensitivity: 95 dB
Frequency Response: 145 – 9,000 Hz
Voice Coil: 1.5″
Steel Basket with High Strength Ferrite Magnet
Recommended High Pass Filter with TPT-SP4BT DSP:
160 Hz under 300 Watts of Amplifier RMS Power with 18dB Slope
140 Hz under 200 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Mounting depth: 2.60″
Mounting Cutout Diameter: 5.75″
Overall Diameter: 6.61″
Weight: 4.19 Lbs

Listen to music to a whole new level with the TPT-CX6-4 PRO, a 6.5″ 2-Way Coaxial, that is basically a PRO Audio full-range loudspeaker combo.

This pro midbass speaker has an impressive punch combined with its bullet tweeter. It responds from 80 to 20,000 Hz and gives your system a new quality of sound.

Take your sound to the highest output level with this 2-Way coaxial to feel and listen to music the way it was meant to be heard!

• PREMIUM 6.5” DOOR SPEAKERS: With 96dB sensitivity, you’ll get more output and a more impactful sound. Wide Frequency Response of 80 – 20,000 Hz provides the cleanest and most detailed vocal and sound reproduction.
• HIGH PERFORMANCE: Experience exceptional sound quality with TIMPANO’s 6.5 inch coaxial speaker, designed specifically for car audio applications. These speakers provide crisp, clear audio, ensuring an immersive listening experience on the road. Grill and Screws Included.
• FULL RANGE SOUND: Midbass PRO Audio mid with a built-in bullet tweeter, powered by a high-performance neodymium motor, delivering crisp, ultra-clear highs with unmatched efficiency.
• POWER YOU CAN RELY ON Can handle up to 600 Watts, able to deliver a tremendous amount of sound output. 4 Ohm Impedance.
• PERFECT FOR CAR STEREO: With premium components and technology for 2-Way systems ( Subwoofer, & Coaxial Speaker ) Perfect option for OEM location replacement that needs a loud mids and highs to keep up with high power subwoofer system. 2.97” of mounting depth, may require custom spacer.

Install multiple speakers on a single system amplifier, you can easily wire 4x speakers in parallel to a TPT-1500 at 1 Ohm. Taking your custom system to the maximum output level, where you can drive with the windows down and still have your music heard over down on the block.

View details – TPT-1000.4 2 Ohm

View details – TPT-1500 1 Ohm

Specs:
600 Watts Max Power
300 Watts RMS Power with Digital DSP
225 Watts RMS Power with Car Audio Crossover
Impedance: 4 Ohm
Sensitivity: 96 dB
Frequency Response: 80 – 20,000 Hz
Speaker Voice Coil: 1.5”
Tweeter Voice Coil: 1”
Steel Basket with High Strength Ferrite Magnet and Neodymium Tweeters

Recommended High Pass Filter with TPT-SP4BT DSP:
125 Hz under 300 Watts of Amplifier RMS Power with 18dB Slope
120 Hz under *225 Watts of Amplifier RMS Power with 12dB Slope
(*Maximum power handling using a regular car audio amplifier crossover)

Sizing:
Mounting Depth: 2.97”
Mounting Cutout Diameter: 5.75″
Overall Diameter with Grill: 6.85″
Overall Diameter without Grill: 6.61″
Weight: 5.15 lbs

The RS Series brings new Subwoofers, amplifiers and car speakers with high-fidelity sound and performance for your everyday car system, specifically designed and developed for the car audio market.

• Small Profile – Designed for easier installation with its standard frame size that fits many OEM door speaker locations. 4 Ohm Impedance.
• 2-Way Coaxial – Built-in soft dome tweeter with in-line capacitor attenuates perfectly with the speaker, delivering rich, detailed sound.
• These 6.5″ coaxial speakers utilize a high quality silk dome tweeter and woofer, providing more accurate audio at 90dB sensitivity, superior to most stock car audio speakers.
• The RS65-CX 2-way coaxial does not require a large amount of power to operate. They get loud extremely easy with 160 watts RMS per pair making it suitable for use with the compact QS400.4 2 Ohm.

RS65-CX is designed for easy installation with a standard 6.5″ frame size that fits many OEM door speaker locations.
Although this coaxial was designed to be powered by an amplifier, it can also be used in a factory or aftermarket radio for good sound quality and better clarity over OEM speakers.

The RS65-CX will immerse you in the music no matter where you are in your vehicle. Upgrade today and hear the difference!

This 2-Way Car Coaxial speaker is an excellent upgrade for listeners wanting to go beyond the standard factory upgrade. With frequency responses ranging from 45Hz – 20,000Hz it delivers sound across the entire frequency spectrum.

Designed with a 6.5” woofer and a 1” Neodymium Tweeter with built-in crossover, the different components are each responsible for reproducing a specific frequency range, all connected from a single push-terminal, making for an easy installation without having to tune two separate components.

Built to perform and able to handle 80 Watts RMS each, these car speakers are the most ideal OEM replacement.

If your car has 4x 6.5″ speakers or just 2x 6.5″ + 2x 6×9” you will only need one amplifier to power these speakers to reach high output levels.

The compact QS400.4 2 Ohm amplifier is able to power all 4 speakers, one per channel, getting them extremely loud with a small amount of power.

PRV 6.5″ 2-Way Coaxial Car Speaker RS65-CX 160 Watts RMS / 4 Ohm PAIR – Built Neodymium Tweeters with Grill Included

GENERAL SPECIFICATIONS

Nominal Diameter	6.5″ (165 mm)
Nominal impedance	4 Ohm
Continuous Program Power (RMS)**	80 Watts
Max Peak Power***	160 Watts
Sensitivity 2.00V at 1m	90 dB
Frequency Response	45 – 20,000 Hz
Voice Coil Diameter	1.2″ (30 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	10.0 mm
Former Material	Kapton
Magnetic Gap Depth	5.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	9.8 l
Excursion (mathematical)***	Xmax	3.75 mm
Free Air Resonance	Fs	75.3 Hz
Mechanical Factor	Qms	13.19
Electrical Factor	Qes	0.87
Total Factor	Qts	0.81
Cone Area	Sd	143 cm²
Mechanical Mass	Mms	13.0 g
Bl Factor	Bl	5.12 Tm
Dc Resistance	Re	3.7 Ohm
Inductance	Le	0.55 mH at 1 kHz
Mechanical Mass Without Air	Mmd	12.0 g
Mechanical Compliance	Cms	0.34 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.50” (165 mm)
Front Mount Baffle Cutout	5.63″ (143 mm)
Mounting Depth	2.40” (61 mm)
Overall Depth	3.40” (86.4 mm) with grill
Net Weight	2.45 Lbs (1.10 kg)
Shipping Weight	6.75 Lbs (3.05 kg)
Carton Dimensions W x L x H	15.47″ x 8.0″ x 5.90” (393 x 203 x 150 mm)

Its most common application is to replace speakers in a system with a factory amplifier, which makes it a breeze to upgrade the sound system with only one speaker.

This fullrange speaker works great with a factory tuned amp with a set HPF and LPF. They will be a huge improvement compared to the low sensitivity stock speakers

• Its high sensitivity and wide frequency response make these the best OEM replacement speakers, powered by your stock or aftermarket radio.
• Small Profile – Designed for easier installation with its standard frame size that fits many OEM door speaker locations. 4 Ohm Impedance.
• Fullrange Speaker – Designed to reproduce a wide frequency range from 60Hz – 18,000Hz, it can play low midbass punch and high notes, delivering rich, detailed sound.
• These 6.5″ full range speakers utilize a high quality ultra lightweight cone, providing more accurate audio at 94dB sensitivity, superior to most stock car audio speakers.

RS65-PRO is designed for easy installation with a standard 6.5″ frame size that fits many OEM door speaker locations.

Although this speaker was designed to be powered by an amplifier, it can also be used in a factory or aftermarket radio for good sound quality and better clarity over OEM speakers.

The RS65-PRO will immerse you in the music no matter where you are in your vehicle by replacing your current speaker! Upgrade today and hear the difference!

This speaker is an excellent upgrade for listeners wanting to go beyond the standard factory component set. With frequency responses ranging from 60Hz – 18,000Hz it delivers sound across a wide frequency spectrum, so you can completely transform your system with just a speaker upgrade, combined with your stock tweeter.

What truly sets this unique speaker apart is its shallow mounting depth of only 2.44 inches with a small profile, which makes it ideal for tight spaces where full-sized speakers just won’t fit.

As the RS65-PRO has a sensitivity of 94 dB, it is extremely efficient at converting low power into sound, despite its slim design.

Built to perform and able to handle 100 Watts RMS each, these car speakers are the most ideal OEM replacement in a 3-Way or 2-Way component setup.

The RS65-PRO speakers do not require a large amount of power to operate. They get loud extremely easy with less than 200 watts RMS per pair making it suitable for use with the compact QS400.4 2 Ohm, installing 4 Speakers, one per Channel.

The RS Series brings new Subwoofers, amplifiers and car speakers with high-fidelity sound and performance for your everyday car system, specifically designed and developed for the car audio market.

PRV 6.5″ Fullrange Car Speaker RS65-PRO 200 Watts RMS / 4 Ohm PAIR – OEM Replacement

GENERAL SPECIFICATIONS

Nominal Diameter	6.5″ (152 mm)
Nominal impedance	4 Ohm
Continuous Program Power (RMS)**	100 Watts
Max Peak Power***	200 Watts
Sensitivity 2.00V at 1m	94 dB
Frequency Response	60 – 18,000 Hz
Voice Coil Diameter	1.0″ (25.4 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	9.20 mm
Former Material	Kapton
Magnetic Gap Depth	5.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	5.77 l
Excursion (mathematical)***	Xmax	3.35 mm
Free Air Resonance	Fs	131.6 Hz
Mechanical Factor	Qms	10.15
Electrical Factor	Qes	1.18
Total Factor	Qts	1.06
Cone Area	Sd	154 cm²
Mechanical Mass	Mms	8.37 g
Bl Factor	Bl	4.46 Tm
Dc Resistance	Re	3.4 Ohm
Inductance	Le	0.16 mH at 1 kHz
Mechanical Mass Without Air	Mmd	7.29 g
Mechanical Compliance	Cms	0.175 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.57” (167 mm)
Front Mount Baffle Cutout	5.75″ (146 mm)
Mounting Depth	2.44” (62 mm)
Overall Depth	2.76” (70 mm)
Net Weight	2.70 Lbs (1.25 kg)
Shipping Weight	6.95 Lbs (3.15 kg)
Carton Dimensions W x L x H	16.53″ x 8.46″ x 4.33” (420 x 215 x 110 mm)

Small and powerful, this 6.5″ car subwoofer RS65-SUB delivers hard hitting bass. This sub was engineered and built with performance in mind, for compact pickup trucks, or any car you want to put a subwoofer in without sacrificing trunk space.

• Optimized for use in compact enclosures this subwoofer is ideal for under or behind seat truck boxes
• 4 layer high-temperature copper voice coil capable of handling 300 watts RMS program power, which makes high acoustic output
• High roll U surround gives an 8.75 mm of Xmax for low bass reproduction without any issues
• Side forced cooling system with vented back plate design for better heat dissipation
• Dual 4 Ohm, easy setup to connect two subs in parallel to 1 ohm

Its shallow profile takes up very little space inside any enclosure. This compact design still focus on performance, maximizes the excursion capability by creating an equal distance between the cone, spider and bottom plate.

In this mighty 6.5″ sub, can reach 0.82″ peak to peak excursion before damage! Which allows for deep low frequency bass!

PRV 6.5” Car Subwoofer RS65-SUB Dual 4 Ohm 300 Watts Shallow Sub

Recommended Amplifier configurations:

• 1 Subwoofer – 1x RS500 BASS 2 Ohm, one sub in parallel
• 2 Subwoofers – 1x RS500 BASS 1 Ohm, both subs in parallel
• 4 Subwoofers – 1x RS900 BASS 2 Ohm, 4 subs in series/parallel

The LPF on amplifiers should be set between 80 – 120 Hz when using musical power up to 300 Watts RMS, Subsonic filters should be set according to music style, this will help to avoid subwoofer damage from excess excursion caused by ultra low frequencies.

Take your time and break them in! A brand-new sub is always a little stiff but after break-in, the subwoofer soft parts will stretch out! This means with less power you will create the same output with more extended low bass tones

Recommended Custom Enclosures: Inside measurements based with 3/4″ wood material.

Single Sub Sealed Enclosure 55 Hz Tunning
All sealed-enclosures should be filled to 50% of poly-fil.

Single Sub Compact Ported Enclosure 50 Hz Tunning

Dual Sub Recommended Ported Enclosure 45 Hz Tunning

GENERAL SPECIFICATIONS

THIELE-SMALL PARAMETERS

EXTRA INFO

The Sky High Car Audio SH-HD6PV2 is a high-performance 6.5” hybrid loudspeaker designed to deliver powerful midrange clarity and crisp high-frequency response. Built for enthusiasts who demand extreme output and precision, this speaker combines a pro audio midwoofer with an integrated 3” compression driver horn, ensuring superior sound projection for your build.

Features & Specifications:

✅ High Power Handling – Capable of 200W continuous, 300W RMS, and 600W max power, making it a powerful addition to any system.

✅ Loud & Efficient – With a sensitivity of 105dB (1W/1m), this speaker ensures high output with minimal power requirements.

✅ Wide Frequency Range – Covers 70Hz – 20kHz, delivering full midrange and high-frequency clarity.

Sky High Car Audio SH-HD6PV2 6.5” Hybrid Loudspeaker w/ 3” Compression Driver Horn (Single)

The Sky High Car Audio SH-HD6PV2 is a high-performance 6.5” hybrid loudspeaker designed to deliver powerful midrange clarity and crisp high-frequency response. Built for enthusiasts who demand extreme output and precision, this speaker combines a pro audio midwoofer with an integrated 3” compression driver horn, ensuring superior sound projection for your build.

Features & Specifications:

✅ High Power Handling – Capable of 200W continuous, 300W RMS, and 600W max power, making it a powerful addition to any system.

✅ Loud & Efficient – With a sensitivity of 105dB (1W/1m), this speaker ensures high output with minimal power requirements.

✅ Wide Frequency Range – Covers 70Hz – 20kHz, delivering full midrange and high-frequency clarity.

✅ Durable Construction – Features a water-resistant carbon fiber cone and a treated cloth surround for longevity and resilience.

✅ Premium Compression Driver – Integrated 3” compression driver horn provides loud, crisp highs for unmatched vocal clarity.

✅ Robust Motor Design – Equipped with a neodymium magnet and a die-cast aluminum basket for maximum efficiency and strength.

✅ Optimized Fit – Designed with an overall diameter of 6.85”, a 5.7” cutout diameter, and a 3.7” mounting depth for seamless installation.

Engineered for those who need high SPL, crisp vocals, and extreme loudness, the SH-HD6PV2 is perfect for custom car audio setups that demand the best in performance and durability.

Upgrade your sound with Sky High Car Audio – experience next-level clarity and power with the SH-HD6PV2!

Available in 6.5” – 15” | D2/D4 Ohm Options

FE: Unreal Value. Real Bass.

Meet the FE Series—Sky High Car Audio’s most accessible line of subwoofers, created for enthusiasts who want quality bass on a budget. Designed for clean output, daily reliability, and efficient power handling, the FE Series proves that affordable doesn’t mean under-built. With real motor strength, high-temp voice coils, and thoughtful design elements carried over from our higher-end lines, this is entry-level done the Sky High way.

Built with a durable stamped steel basket, the FE Series keeps costs low while maintaining solid structural integrity. The 6.5” FE starts under $100 shipped—something nearly unheard of in today’s audio market—yet still brings serious low-end performance to the table.

The 6.5” and 8” FE models feature 2” 4-layer high-temp voice coils, rated at 300W and 400W RMS respectively. Both use double-stacked ferrite motor structures, and come equipped with Sky High 10-gauge direct leads for clean, simple connections in tight installs.

Moving up to the 10”, 12”, and 15” versions, each sub is powered by a 2.5” 4-layer high-temp coil and rated for 700W RMS. These larger models feature a double-stacked ferrite motors, but are upgraded with push terminals for secure, high-current connectivity. They’re built to offer strong musical performance while giving builders and hobbyists a sub they can rely on at an unbeatable price point.

All FE subwoofers are designed for daily use—tight, responsive bass that blends into your system without overpowering it, yet still hits with enough authority to feel. Whether you’re building your first system, upgrading a stock setup, or stacking value in a budget-friendly build, the FE Series delivers.

Big Bass. Small Budget.

Welcome to the Sky High Car Audio Revolution.

Available in 6.5” – 18” | D1/D2 Ohm Options

BMX: Where Output Meets Endurance. 

After years of development, trial and error, and decades immersed in the car audio industry, the BMX Series from Sky High Car Audio has finally arrived—representing the culmination of everything we’ve learned from competing, building, and manufacturing elite-level subwoofers. With deep roots in the basshead community and ownership in some of the most respected brands in the game, we’ve poured all our knowledge into the design and execution of what we believe is a true game-changer. The all-new BMX Series isn’t just a subwoofer—it’s the next evolution in high-performance bass.

At its core, the BMX Series is a high-excursion, true-to-size subwoofer featuring a 3” 8 layer voice coil, rated for 2500W RMS of clean musical power, with the motor and coil combination capable of enduring thermal bursts up to 25,000 watts. This beast utilizes a triple-stacked Y35 ferrite motor structure with aluminum shorting ring, pole vents and (4) drilled and tapped backplate holes, giving builders flexibility for reinforced mounting or enhanced cooling. A tooled SHCA magnet boot completes the structure—adding both functional protection and a sleek aesthetic.

Mechanically, the 12”, 15”, and 18” BMX subwoofers push performance with an impressive 32mm Xmax and 39mm Xmech, delivering massive excursion while maintaining control. The 10” stacked spider pack, spaced for increased durability, keeps everything tight and responsive under heavy load. A fiberglass-reinforced cone support lies beneath a hardened paper cone—engineered with a tooled recess for the standard carbon fiber dust cap, maximizing cone integrity and minimizing flex during peak output. To round out the features we utilize a secondary pressure cap nestled under the primary cap which works as a pressure buffer and structural reinforment to the primary cap.

Connection is no afterthought—4-gauge push terminals ensure serious current delivery, while the foam surround is precision-molded for optimal compliance. Finished in an all-black stealth aesthetic, the BMX Series not only performs like a champion—it looks the part too.

With a low FS and high BL, the BMX Series is designed to play across the entire bass frequency range with authority and musicality. It’s not a one-note wonder—it’s a daily demo monster and a competition weapon rolled into one.

Customization Options: Sky High Car Audio is proud to offer in-house custom build options for select subwoofer lines, hand-assembled at our Sparks, NV facility. Customization is available exclusively on the BMX Series 10–18”, FMX Series 12–18”, and FXXL Series 12–18” models. We offer custom Prismatic Powders powder coating in single-stage or two-stage finishes to match your build’s aesthetic (additional cost and lead time apply). For those looking to stand out in the lanes or the show floor, forged carbon fiber cone upgrades are available on FMX and FXXL subs for a premium finish and added cone rigidity. Builders can choose between direct leads (with length and color options) or push terminals on FMX and FXXL models, which come standard with direct leads. We also offer box support add-ons for our threaded backplates and optional back plate cooling modifications for all eligible series (back plate cooling to drop 1/1/26). Lastly we can build you a custom spider pack to meet your needs, but for daily music we highly suggest the stock build form for suspension.

Where Output Meets Endurance. 

Welcome to the Sky High Car Audio Revolution.

Available in 6.5” – 18” | D2/D4 Ohm Options

FXB: Sky High Performance. Everyday Price.

The FXB Series by Sky High Car Audio is designed to deliver powerful, controlled bass at an unbeatable value. Built for those who want serious performance without breaking the bank, the FXB Series brings real-world output, reliable design, and our signature engineering approach to a more accessible price point. Whether you’re upgrading your daily driver or building a clean, budget-conscious system, the FXB Series offers solid performance with no shortcuts where it counts.

The FXB Series 6.5” is compact, efficient, and surprisingly potent. With a 15mm Xmax, 400W RMS rating, and a 2” high-temp voice coil, this small-frame subwoofer punches above its weight. A double-stacked ferrite motor, 5.5” progressive spiders and 10-gauge direct leads handle clean power transfer. Designed with a shallow mounting depth, it fits easily into doors and tight sealed applications without sacrificing output or control.

The FXB Series 8” follows suit with a bit more throw and power. With a 17mm Xmax, 500W RMS rating, and the same double-stacked Y35 motor structure, it runs on a slightly larger 6.5” spider pack and 10-gauge direct leads. Still compact in depth, the FXB 8” is ideal for small ported or sealed enclosures where space is tight but impact matters.

The FXB Series 10” is where things get serious. Featuring a 30mm Xmax, this sub is rated for 1000W RMS and is built around a 3” 4-layer voice coil, the same coil used in our h

larger 12”–18” FXB subs. The motor remains a double-stacked ferrite design, and the suspension includes a full-size 8.8” progressive spider for added linear control. Finished with a cast aluminum basket and push terminals, the FXB 10” is one of the most capable budget 10s on the market.

Every FXB subwoofer carries the Sky High Car Audio design language—blacked-out aesthetic, tooling for strength, and real-world durability. These aren’t stripped-down entry-level drivers—they’re the result of smart material choices and years of design refinement to bring maximum value to everyday builds.

Sky High Performance. Everyday Price.

Welcome to the Sky High Car Audio Revolution.

Available in 6.5” – 18” (excludes 10”)

D1/D2 Ohm Options

FMX: Forged to Perform. Built to Endure.

The FMX Series from Sky High Car Audio is the result of years of innovation, real-world testing, and deep involvement in the high-output car audio scene. Every aspect of this line reflects our passion for pushing limits—from competition lanes to daily builds. Drawing from decades of experience and leadership in the industry, the FMX lineup represents a smarter, stronger class of subwoofers purpose-built for those who demand reliable performance and lasting thermal stability.

For installs with limited space that still demand serious output, the FMX 6.5” and 8” subwoofers deliver unmatched punch and clarity with class-leading motor force and thermal control in their size class. Built around triple-stacked Y35 ferrite motors and finished with standard forged carbon fiber cones and dust caps, these woofers pack heavyweight power into compact footprints.

The FMX Series 6.5” features a 600W RMS rating, driven by a 2” high-temp coil, and stabilized by a 5.5” progressive spider. It’s equipped with Sky High 10-gauge direct leads, ensuring clean power transfer and reliable long-term use. Despite its small size, the 6.5” FMX hits with control and depth, making it ideal for tight spaces or multi-driver setups where output and efficiency matter.

The FMX Series 8” steps things up with a 2.5” voice coil, 800W RMS power handling, and a precision-tuned 6.5” progressive spider. A rated 16mm Xmax allows serious stroke, while 10-gauge direct leads ensure efficient electrical flow under demanding use. With a larger motor and extended coil, the 8” FMX delivers both high end bass articulation and deep low-end authority in small enclosures.

As with the rest of the FMX family, both models come finished in a stealth black aesthetic, including the forged carbon fiber dust cap recessed into the cone for strength, and a full fiberglass cone support underneath for added rigidity. These subs aren’t just made to look good—they’re built to last and perform.

Like their larger siblings, the 6.5” and 8” FMX offer excellent bandwidth and musical versatility—not just SPL peaks.

Note: No customization options are available on the FMX 6.5” and 8” models. These subs come optimized and ready to perform straight out of the box.

Welcome to the next tier of performance.

Welcome to the Sky High Car Audio Revolution.

600 Watts Max Power Handling

2″ Voice Coil

96.5 dB Sensitivity

135HZ-12.5KHz of frequency response

GENERAL SPECIFICATIONS

Nominal Diameter          6.5” (165mm)

Max Power Handling      600 w

RMS Power Handling     300 w

Frequency Response      135Hz-12.5KHZ

Nominal Impedance       4ohm

Sensitivity                         96.5dB

Magnet                              Neodymium

Voice Coil Diameter        2″

Voice Coil Wire               CCAW

THIELE-SMALL PARAMETERS

Equivalent Volume         Vas        2.75 L

Free Air Resonance        Fs           138 Hz

Mechanical Factor          Qms      6.53

Electrical Factor               Qes       0.35

Total Factor                     Qts        0.34

Cone Area                        Sd          136.8cm²

Mechanical Mass            Mms     12.66 g

BI Factor                           BI           9.92 Tm

Dc Resistance                  Re          3.2 Ohms

MOUNTING INFO

Overall Diameter                          6.69”(210mm)

Front Mount Baffle Cutout          5.90″(186mm)

Mounting Depth                           2.73″(79mm)

Overall Depth                                 3.01″(89.3mm)

1.5″ Voice Coil

94 dB Sensitivity

135HZ-13KHz of frequency response

GENERAL SPECIFICATIONS

Nominal Diameter          6.5” (165.1mm)

Max Power Handling      500 w

RMS Power Handling     250 w

Frequency Response      135Hz-13KHZ

Nominal Impedance       4ohm

Sensitivity                         94 dB

Magnet                              Ferrite

Voice Coil Diameter        1.5″

Voice Coil Wire               CCAW

THIELE-SMALL PARAMETERS

Equivalent Volume         Vas        3.06 L

Free Air Resonance        Fs           137 Hz

Mechanical Factor          Qms      5.18

Electrical Factor               Qes       0.93

Total Factor                     Qts        0.79

Cone Area                        Sd          128.6cm²

Mechanical Mass            Mms     9.64 g

BI Factor                           BI           5.43 Tm

Dc Resistance                  Re          3.2 Ohms

MOUNTING INFO

Overall Diameter                          6.57”(167mm)

Front Mount Baffle Cutout          5.64″(143mm)

Mounting Depth                           2.67″(68mm)

Overall Depth                                 2.99″(76mm)

6.5″ Speaker System pair

RMS 75/150W per each

Carbon Fiber Cone!

4ohm 1.2″ TIL Voice Coil

30 oz Magnet

EVA gasket ring

Sensitvity 90DB

Frequency Range 50Hz-20Khz

Mounting Depth 70mm/2.7″

Dounting Diameter 148mm/5.8″

Powerful Performance: The SH-MB64 handles up to 150W RMS and 300W peak power, ensuring strong and consistent output. Its sensitivity of 96dB (1w/1m) guarantees efficient sound reproduction with minimal distortion across a frequency range of 80Hz to 6KHz.

High-Quality Components: Built with a 1.5” voice coil wound with CCAW (Copper-Clad Aluminum Wire) on a durable Kapton former, the MB64 is engineered for durability and precision. The woofer features a paper cone and dust cap for natural sound reproduction, complemented by a cloth surround that allows for controlled excursion.

Ferrite Motor Design: The 20 oz ferrite magnet provides a solid foundation for the speaker’s powerful performance. Its steel basket, finished in satin black, ensures structural integrity, while the compact design makes installation easy in a wide range of vehicles.

Thiele & Small Parameters: With a Vas of 2.79L, Xmax of 9.4mm, and a Qts of 0.39, the MB64 delivers precise mid-bass response with excellent control. The BL factor of 8.47 and a free-air resonance (Fs) of 142Hz contribute to its exceptional performance.

Dimensions and Mounting: The SHCA Pro Audio MB64 measures 6.5” in overall diameter with a depth of 3.1”. The front mount baffle cutout is 5.6”, and it requires a mounting depth of 2.8”, ensuring compatibility with a variety of car audio installations.

Ideal for Enthusiasts: Whether you’re building a custom setup or upgrading your existing system, the SHCA Pro Audio MB64 offers outstanding sound quality and durability, making it a must-have for any serious car audio enthusiast.

Engineered with a wide frequency response from 100Hz to 20KHz and a high sensitivity of 94dB, the SH-CX84SLIM delivers a well-balanced audio spectrum, capturing rich lows and crisp highs with remarkable clarity. The integrated compression driver horn ensures that every detail in the high-frequency range is sharp and precise, enhancing your listening experience.

At its core, the SH-CX84SLIM features a 1.5” KSV voice coil with CCAW winding on a durable Kapton former, ensuring robust power handling and reliable performance. Its woofer is crafted with a paper cone and cloth surround for natural sound, set within a black-finished steel basket and driven by a sturdy 29.5 oz ferrite magnet. The high-frequency driver uses a 1” titanium diaphragm powered by a neodymium magnet, enhancing responsiveness and ensuring longevity in high-performance use.

Designed with a slim profile to fit a variety of installation needs, this speaker allows for a seamless upgrade without sacrificing space. Supplied with a protective grill, the SH-CX84SLIM is ready to perform in any setting, delivering an immersive audio experience that only Sky High Car Audio can provide.

Enhance your audio setup with the SH-CX84SLIM—where compact design meets uncompromised sound quality.

The SoundQubed HDS-MB6-4 is a powerful 6.5” mid-bass loudspeaker built for high-output, water-resistant performance in demanding environments. Featuring a coated IP65 paper cone and a rugged steel basket, this speaker is designed to handle the elements while delivering rich, punchy mids. With a 150W RMS / 300W peak power handling and an impressive 96dB sensitivity, it’s tuned for efficiency and clarity in midrange-focused systems. Its robust 1.5” voice coil on a Kapton former and ferrite motor structure ensures durability and thermal control. Ideal for car audio enthusiasts, custom installs, or outdoor setups that demand loud, clean mid-bass with solid build quality.

The 6.5” Subwoofer Recone Kit – Trinity H Series is your ultimate solution for bringing your subwoofer back to life. Crafted with high-quality rebuild components, this kit ensures that your Trinity H Series 6.5” subwoofer performs like new, delivering the powerful sound you love.

Kit Includes:

• Essential rebuild components to restore your 6.5” subwoofer
• Excludes bonding agents and shims for added flexibility in repairs

Why Choose the 6.5” Subwoofer Recone Kit – Trinity H Series?

• Specifically designed for the Trinity H Series subwoofer
• Built for optimal sound quality and long-lasting durability
• Compatible with professional installation for seamless repairs

Please note, the 6.5” Subwoofer Recone Kit – Trinity does not include bonding agents or shims. For the best results, we recommend consulting a professional repair technician to ensure proper installation. Images are generic and may not reflect the exact product provided.

No warranty is offered on recone kits, but the 6.5” Subwoofer Recone Kit – Trinity guarantees premium quality to restore your subwoofer to its original performance.

Upgrade your car audio system with the Sky High Car Audio SH-EL64BNEO 6.5” Midrange Loudspeaker, engineered to deliver outstanding performance and precision. Featuring a neodymium magnet and aluminum bullet phase plug, this speaker is built for audiophiles seeking unparalleled clarity and power.

Exceptional Sound Performance

The SH-EL64BNEO offers a wide frequency response of 200Hz to 16KHz and a sensitivity of 96dB, ensuring clear and detailed audio reproduction. With an RMS power handling of 225W and peak power of 450W, this speaker delivers dynamic sound at any volume.

Durable and Advanced Design

Built with a non-pressed paper cone and CNC-machined aluminum bullet, this loudspeaker combines rigidity with lightweight construction for precise sound. A cloth surround enhances its durability, while the robust aluminum basket provides structural integrity for long-lasting performance.

Efficient Motor System

Powered by a 1.5-inch Kapton voice coil and CCAW winding, the SH-EL64BNEO ensures efficient thermal and electrical conductivity. The 7.67-ounce neodymium magnet produces a strong magnetic field, allowing for superior sound output with minimal distortion.

Compact and Versatile Installation

Designed for easy integration, the SH-EL64BNEO has a mounting depth of 2.4 inches and a front baffle cutout diameter of 5.7 inches, making it compatible with most vehicle setups. The included grille adds an extra layer of protection while maintaining a sleek appearance.

Perfect for High-Performance Midrange Audio

Whether you’re enhancing an existing system or building a custom configuration, the SH-EL64BNEO excels in midrange clarity, making it ideal for capturing vocals and instruments with accuracy.

Specifications:

•Nominal Diameter: 6.5 inches / 165mm

•Nominal Impedance: 4 Ohms

•Continuous Power Rating: 150W

•RMS Power Handling: 225W

•Max Power Handling: 450W

•Sensitivity (1w/1m): 96dB

•Frequency Response: 200Hz – 16KHz

•Recommended High-Pass Crossover: 200Hz

Features:

•Cone Material: Non-Pressed Paper

•Bullet Material: CNC Aluminum

•Surround Material: Cloth

•Basket Material: Aluminum

•Magnet Material: Neodymium

•Magnet Weight: 7.67 Oz

•Voice Coil Diameter: 1.5 inches / 38.6mm

•Voice Coil Former Material: Kapton

•Winding Material: CCAW

Measurements:

•Overall Diameter: 6.5 inches / 165mm

•Overall Diameter (with grille): 7.1 inches / 181mm

•Mounting Depth: 2.4 inches / 61.5mm

•Front Mount Baffle Cutout: 5.7 inches / 145mm

•Overall Depth (with grille): 3.45 inches / 88mm

Elevate your audio experience with the Sky High Car Audio SH-EL64BNEO. Sold individually, this midrange loudspeaker is designed to deliver powerful and precise sound for any car audio setup.

Please note: This speaker is sold individually.

]]> https://dv8shop.com/product/shca-sh-el64b/ Thu, 06 Feb 2025 02:59:02 +0000 https://dv8shop.com/?post_type=product&p=19427 Sky High Car Audio SH-EL64B 6.5” Midrange Loudspeaker with Bullet

Enhance your car audio system with the Sky High Car Audio SH-EL64B 6.5” Midrange Loudspeaker, designed to deliver exceptional clarity, power, and performance. With premium materials and advanced engineering, this speaker is the ideal choice for enthusiasts seeking professional-grade sound quality.

Outstanding Sound Performance

The SH-EL64B offers a wide frequency response from 100Hz to 12KHz and a high sensitivity of 96dB, ensuring clear, detailed audio even at high volumes. With a power handling capacity of 200W RMS and a peak power of 500W, this speaker provides dynamic and powerful sound output to elevate your listening experience.

Durable and Efficient Design

Featuring a non-pressed paper cone and CNC aluminum bullet, the SH-EL64B delivers both rigidity and responsiveness for precise sound reproduction. A cloth surround enhances durability, while the steel basket provides a robust structure for reliable long-term performance.

High-Performance Motor System

The speaker is powered by a 1.5-inch Kapton voice coil with CCAW winding, ensuring excellent thermal and electrical conductivity for consistent performance. A 30-ounce ferrite magnet provides a strong magnetic field, driving the speaker to deliver high-quality sound with minimal distortion.

Compact and Versatile Installation

The SH-EL64B is designed for easy installation in various car setups. With an overall diameter of 6.61 inches and a mounting depth of 2.6 inches, this midrange speaker is compact and fits seamlessly into most vehicles.

Ideal for Midrange Clarity

Whether upgrading your audio system or replacing an old speaker, the SH-EL64B is engineered to excel in the midrange frequencies, ensuring clear vocals and instrumentals for a balanced soundstage.

Specifications:

•Nominal Diameter: 6.5 inches / 165mm

•Nominal Impedance: 4 Ohms

•Continuous Power Rating: 200W

•RMS Power Handling: 250W

•Max Power Handling: 500W

•Sensitivity (1w/1m): 96dB

•Frequency Response: 100Hz – 12KHz

•Recommended High Pass Crossover: 160Hz

Features:

•Cone Material: Non-Pressed Paper

•Bullet Material: CNC Aluminum

•Surround Material: Cloth

•Basket Material: Steel

•Magnet Material: Ferrite (30 Oz)

•Voice Coil Diameter: 1.5 inches / 38.6mm

•Voice Coil Former Material: Kapton

•Winding Material: CCAW

Measurements:

•Overall Diameter: 6.61 inches / 168mm

•Mounting Depth: 2.6 inches / 66mm

•Front Mount Baffle Cutout: 5.7 inches / 145mm

Upgrade your car audio setup with the Sky High Car Audio SH-EL64B and experience rich, detailed sound like never before. Sold individually, this midrange loudspeaker is built to deliver uncompromising performance and reliability.

Please note: This speaker is sold individually.

Unleash Superior Sound

At the heart of the SH-65FE lies a robust ferrite motor structure, complemented by a lightweight carbon fiber cone. This premium cone material ensures rigidity and minimal distortion, enabling the speaker to deliver crisp, dynamic sound across a wide frequency range. With a frequency response of 40Hz–8kHz and a sensitivity of 89.2dB, the SH-65FE offers an impressive balance of deep bass and clear mids for a truly immersive audio experience.

Engineered for Power

This 6.5” loudspeaker is designed to handle up to 400W peak power and 100W AES, ensuring powerful and consistent performance. Whether you’re playing thunderous basslines or intricate melodies, the SH-65FE provides the precision and clarity that discerning audiophiles demand.

Built for Durability

The SH-65FE features a robust aluminum basket with a sleek black finish, ensuring durability and vibration resistance. Its carbon fiber dust cap and rubber surround enhance the speaker’s longevity while supporting optimal excursion for impactful bass. The 1.2” CCAW voice coil, supported by a TIL former, ensures reliable performance even under demanding conditions.

Easy Installation and Versatile Compatibility

With a compact mounting depth of 2.85” (72.5mm) and a front baffle cutout of 5.6” (142mm), the SH-65FE is designed for straightforward installation. Its push terminals provide secure and hassle-free wiring, making it a versatile choice for a wide range of car audio systems.

Specifications at a Glance:

•Nominal Diameter: 6.5”

•Frequency Response: 40Hz–8kHz

•Impedance: 4 Ohms

•Sensitivity: 89.2dB (1W/1m)

•Peak Power Handling: 400W

•Cone Material: Carbon Fiber

•Surround Material: Rubber

•Basket Material: Aluminum (Black Finish)

•Magnet Material: Ferrite (20.2 Oz)

The Sky High Car Audio SH-65FE 6.5” Mid-Bass/Woofer Loudspeaker is more than just a speaker—it’s a statement of quality and innovation. Whether you’re upgrading your current setup or building a custom system, this loudspeaker promises to deliver a rich and captivating sound experience.

*This item is sold as a pair.

Will fit perfect behind factory seat and works with power rear window.

Tunes to 35hrz and has an estimated bandwidth of 31-66hrz.

Cut to fit four 6.5”
Cutout: 5.85″ Mounting Depth: 6.5″
Estimated Enclosure Weight: 60 lbs

RECOMMENDED SUBWOOFERS
Gately Shield
Gately Alpha  V1
Gately Relentless V1
Gately Alpha V2
Gately Relentless V2
B2 Audio Rage
DC Audio DC-M3

Boxes may come with small imperfections due to the manufacturing process. 

BOXES THAT ARE NOT IN STOCK –  WILL BE MADE TO ORDER (ALLOW 3 WEEKS). SOME IMAGES ARE RENDERINGS.

2.5″ Seat Lift Required. COMES WITH 2.5″ BILLET SEAT LIFT ASSEMBLY.

Cut to fit six 6.5”

Cutout 5.85″ Mounting Depth: 7″
Estimated Enclosure Weight: 75 lbs

RECOMMENDED SUBWOOFERS
Gately Shield
Gately Relentless V1
Gately Alpha V2
Gately Relentless V2
B2 Audio Rage
DC Audio DC-M3

Boxes may come with small imperfections due to the manufacturing process. 

BOXES THAT ARE NOT IN STOCK –  WILL BE MADE TO ORDER (ALLOW 3 WEEKS). SOME IMAGES ARE RENDERINGS.

NO SEAT LIFT REQUIRED.

Cut to fit four 6.5”

Cutout 5.85″ Mounting Depth: 6″
Estimated Enclosure Weight: 85 lbs

RECOMMENDED SUBWOOFERS
Gately Shield
Gately Relentless V1
Gately Alpha V2
Gately Relentless V2
B2 Audio Rage
DC Audio DC-M3

Boxes may come with small imperfections due to the manufacturing process. 

BOXES THAT ARE NOT IN STOCK –  WILL BE MADE TO ORDER (ALLOW 3 WEEKS). SOME IMAGES ARE RENDERINGS.

Dodge crew cab trucks with metal under seat storage compartments.

SEAT LIFT NEEDED. Will fit perfect under factory seat.

Cut to fit four 6.5”

Cutout 5.85″ Mounting Depth: 6″
Estimated Enclosure Weight: 100 lbs

RECOMMENDED SUBWOOFERS
Gately Shield
Gately Alpha V1
Gately Relentless V1
Gately Alpha V2
Gately Relentless V2
B2 Audio Rage
DC Audio DC-M3

Boxes may come with small imperfections due to the manufacturing process. 

BOXES THAT ARE NOT IN STOCK –  WILL BE MADE TO ORDER (ALLOW 3 WEEKS). SOME IMAGES ARE RENDERINGS.

Ford crew cab 1994-2016

Cut to fit four 6.5”

Cutout: 5.85“ Mounting Depth: 5″
Estimated Enclosure Weight: 55 lbs

RECOMMENDED SUBWOOFERS
Gately Shield
Gately Alpha V2
B2 Audio Rage
DC Audio DC-M3

GATELY RELENTLESS WILL NOT FIT

Boxes may come with small imperfections due to the manufacturing process. Minor variances in Fords production may cause the product not to fit. Contact us for any questions regarding fitment.  BOXES THAT ARE NOT IN STOCK –  WILL BE MADE TO ORDER (ALLOW 3 WEEKS). SOME IMAGES ARE RENDERINGS.

( power window motor may need to be relocated )

WILL NOT FIT with rear middle seat over shoulder seatbelt without significant modification.

NO SEAT LIFT NEEDED. Will fit perfectly behind the seat.

Cut to fit six  6.5”

Cutout 5.85″ Mounting Depth: 5.5″
Estimated Enclosure Weight: 65 lbs

RECOMMENDED SUBWOOFERS
Gately Shield
Gately Alpha V2
B2 Audio Rage
DC Audio DC-M3

GATELY RELENTLESS WILL NOT FIT

Boxes may come with small imperfections due to the manufacturing process. Some truck models rear seat assembly may vary from standard production, causing fit issues. 

 BOXES THAT ARE NOT IN STOCK –  WILL BE MADE TO ORDER (ALLOW 3 WEEKS). SOME IMAGES ARE RENDERINGS.

( power window motor may need to be relocated )

WILL NOT FIT with rear middle seat over shoulder seatbelt without significant modification.

NO SEAT LIFT NEEDED. Will fit perfectly behind the seat.

Cut to fit six  6.5”

Cutout 5.85″ Mounting Depth: 5.5″
Estimated Enclosure Weight: 75 lbs

RECOMMENDED SUBWOOFERS
Gately Shield
Gately Alpha V2
B2 Audio Rage
DC Audio DC-M3

GATELY RELENTLESS WILL NOT FIT

Boxes may come with small imperfections due to the manufacturing process. Some truck models rear seat assembly may vary from standard production, causing fit issues.

BOXES THAT ARE NOT IN STOCK –  WILL BE MADE TO ORDER (ALLOW 3 WEEKS). SOME IMAGES ARE RENDERINGS.

Ford crew cab trucks.

NO SEAT LIFT NEEDED. Will fit perfect under factory seat.

Cut to fit four 6.5”

Cutout 5.85″ Mounting Depth: 5.5″
Estimated Enclosure Weight: 65 lbs

RECOMMENDED SUBWOOFERS
Gately Shield
Gately Relentless V1
Gately Alpha V2
Gately Relentless V2
B2 Audio Rage
DC Audio DC-M3

Boxes may come with small imperfections due to the manufacturing process. Some truck models rear seat assembly may vary from standard production, causing fit issues.

BOXES THAT ARE NOT IN STOCK –  WILL BE MADE TO ORDER (ALLOW 3 WEEKS). SOME IMAGES ARE RENDERINGS.

Fits behind factory back seat

Cut to fit four 6.5”

Cutout 5.85″ Mounting Depth: 4.625″
Estimated Enclosure Weight: 45 lbs

RECOMMENDED SUBWOOFERS
Gately Shield
Gately Alpha V1
Gately Alpha V2

GATELY RELENTLESS WILL NOT FIT

Boxes may come with small imperfections due to the manufacturing process. Some truck models seat assembly may vary from standard production, causing fit issues.

 BOXES THAT ARE NOT IN STOCK –  WILL BE MADE TO ORDER (ALLOW 3 WEEKS). SOME IMAGES ARE RENDERINGS.