10MB800FT delivers top-notch midbass punch and clean vocal clarity at a high level output with low distortion and extended midbass response.

Optimized for use in compact enclosures, this midbass speaker provides a smooth vocal response with great output from 500 Hz to 1500 Hz and useful response up to 6,500 Hz, making it a great choice for larger 2 and 3 way systems.

• 2.5″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 Ohm
• Ventilated voice coil gap reduces power compression
• High Xmax 10” Loudspeaker for more mid bass output
• 800 watts continuous program power rating makes the high acoustical output
• Excellent performance in 2-way or 3-way systems

To get superior fidelity, the special composite cone is built with non-pressed paper for a reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker.

The Perfect speaker for TUKUTEO® sound.

The high sensitivity rating of 99 dB 1W/1M which makes it capable of generating a lot of output! This 10″ is a great midbass option for pro audio systems or high SPL automotive systems, where extremely high output is required.

The voice coil is wound on a 2.5″ glass fiber with aluminum wire keeping weight to a minimum for an incredibly quick transient response.

Engineered with 11 mm of winding depth, this inside/outside voice coil provides excellent thermal and mechanical durability.

Combined with its premium ferrite motor, all these characteristics make this speaker unique and deliver high-performance that achieves exceptional clarity, detail, and dynamics on sound.

Popular custom door panel combination with the 10MB800FT and WG2000Py SLIM Mids & Highs Compression Driver all tuned by Our DSP 2.8X ( digital sound processor ) for the best frequency response, follow settings below:

10MB800FT – High Pass Filter HPF 110 Hz BT18 Filter to Low Pass Filter LPF 1800 Hz BT12, following the compression driver from 1000Hz all way to 17,000Hz

Recommended system package 8x 10MB800FT + 4x WG2000Py SLIM

PRV 10″ Midbass Speaker 10MB800FT 800 Watts / 8 Ohm High Power PRO Audio Low Frequency Loudspeaker

2 Speakers – 1x MDX2000.2 at 2 Ohm, 2 speakers in parallel on the bridged channel
4 Speakers – 1x QS3000 at 2 Ohm, 4 speakers in parallel
8 Speakers – 1x QS7000 at 1 Ohm, 8 speakers in parallel

Recommended HPF using PRV Digital Signal Processor DSP when using up to 650 Watts RMS musical power ( without clipping )

• 120 Hz at 12 dB per octave filter Crossover / BT12
• 110 Hz at 18 dB per octave filter Crossover / BT18

If you have compression drivers on your system the recommended LPF is 2,200Hz at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.

GENERAL SPECIFICATIONS

Nominal Diameter	10″ (254 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	400 Watts
Continuous Program Power (RMS)	800 Watts
Max Peak Power	1600 Watts
Sensitivity 2.83V at 1m	99 dB
Recommended High Pass Filter* *For Full Power Handling	120 Hz* *12db Per Octave Crossover
Frequency Response at -10dB	65 – 5,300 Hz
Voice Coil Diameter	2.5″ (65 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	11.0 mm
Former Material	Glass Fiber
Magnetic Gap Depth	8.0 mm
Frame Material	Die Cast Aluminum

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	36.73 l
Excursion (mathematical)***	Xmax	3.50 mm
Free Air Resonance	Fs	64.72 Hz
Mechanical Factor	Qms	15.39
Electrical Factor	Qes	0.33
Total Factor	Qts	0.32
Cone Area	Sd	380 cm²
Mechanical Mass	Mms	33.20 g
Bl Factor	Bl	14.39 Tm
Dc Resistance	Re	5.1 Ohms
Inductance	Le	0.40 mH at 1 kHz
Mechanical Mass Without Air	Mmd	29.01 g
Mechanical Compliance	Cms	0.182 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	10.25” (260.5 mm)
Front Mount Baffle Cutout	8.97” (228 mm)
Mounting Depth	4.09” (104 mm)
Overall Depth	4.68” (119 mm)
Net Weight	11.01 Lbs (5.0 kg)
Shipping Weight	11.90 Lbs (5.4 kg)
Carton Dimensions W x L x H	11.50 ” x 11.50 ” x 6.50” (292 x 292 x 165 mm)

Bringing to you an option that offers the lowest price without sacrificing performance.

• Perfect balance between value and performance
• Lightweight paper cone with triple cloth surround, gives high efficiency 96 dB
• Great value for professional, high output home audio, and car audio applications. 8 Ohm Voice coil.
• Handles 400 Watts, guaranteeing endurance at loudest volumes

Its compact design allows for easy installation in any space, making it versatile and suitable for various audio setups. Featuring a compact push terminal for easy, quick installation.

Don’t underestimate its compact motor design! Featuring the latest technology we can increase tremendously the magnet field without huge magnet.

PRV 8MR400 8″ professional midrange speaker is purpose-built to cover from 90 Hz to 7,500 Hz in three-way speakers, but also works great as a door speaker in car audio applications. Easy to blend in with any 10″ or 12″ midbass and a super tweeter.

PRV 8″ Midrange Speaker 8MR400 PRO Audio 400 Watts / 8 Ohm

4 Speakers – 1x MDX1800.1 2 Ohm, 4 speakers in parallel
8 Speakers – 1x QS3000 1 Ohm, 8 speakers in parallel

Recommended HPF using PRV Digital Signal Processor DSP when using up to 400 Watts RMS musical power ( without clipping )

• 125 Hz at 12 dB per octave filter Crossover / BT12
• 120 Hz at 18 dB per octave filter Crossover / BT18

If you have compression drivers or super tweeters on your system the recommended LPF is 6,000 Hz at 18 dB per octave filter Crossover / BT18 but you may set it lower to blend in better depending on the other components in your system, or you may not use a LPF at low power to take advantage of its high frequency response.

GENERAL SPECIFICATIONS

Nominal Diameter	8″ (203 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	200 Watts
Continuous Program Power (RMS)	400 Watts
Max Peak Power	800 Watts
Sensitivity 2.83V at 1m	96 dB
Recommended Hi Pass Crossover** **For Full Power Handling	125Hz** **12db Per Octave Crossover
Frequency Response at -10DB	90 – 7,500 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	12.0 mm
Former Material	Kapton
Magnetic Gap Depth	6.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	20.23 l
Excursion (mathematical)***	Xmax	4.00 mm
Free Air Resonance	Fs	78.2 Hz
Mechanical Factor	Qms	8.52
Electrical Factor	Qes	0.56
Total Factor	Qts	0.52
Cone Area	Sd	222 cm²
Mechanical Mass	Mms	14.05 g
Bl Factor	Bl	8.15 Tm
Dc Resistance	Re	5.4 Ohm
Inductance	Le	0.42 mH at 1 kHz
Mechanical Mass Without Air	Mmd	12.18 g
Mechanical Compliance	Cms	0.295 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	8.27″ (210 mm)
Front Mount Baffle Cutout	6.97″ (177 mm)
Mounting Depth	3.27″ (83 mm)
Overall Depth	3.58″ (91 mm)
Net Weight	4.85 Lbs (2.20 kg)
Shipping Weight	5.45 Lbs (2.48 kg)
Carton Dimensions W x L x H	9.05″ x 9.05″ x 3.98″ (230 x 230 x 100 mm)

• Seal back basket simplifies cabinet manufacture, eliminating the need for a separate enclosure for other speakers.
• Very compact model with only 2.20″ of mounting depth, suitable for use in 3-way cabinet systems ( Midbass + Seal Basket + High Frequency Driver or Tweeter).
• Optimized to deliver detailed reproduction of mid-range frequencies from 400Hz to 6,000Hz.

A light paper cone is mated to a 1.5″ voice coil for great sensitivity and a 250 watts power handling. A durable spider suspension, woven cloth surround, and stamped steel frame are combined for durability over many hours of use.

Cabinet builders gravitate towards this driver for use in their systems when looking for a lightweight seal basket midrange.

Using a closed basket design in a speaker like the 6MR250SEAL offers several advantages. Firstly, it prevents interference from a woofer or midbass in a small Hi-Fi cabinet, resulting in a cleaner and more accurate midrange response.

Additionally, the closed basket design contributes to a smooth punch of midbass and midrange, enhancing the overall audio performance of the speaker.

PRV 6.5″ Midrange PRO Audio Speaker 6MR250SEAL Sealed Basket / 8 Ohm

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	125 Watts
Continuous Program Power (RMS)	250 Watts
Max Peak Power	500 Watts
Sensitivity 2.83V at 1m	95 dB
Recommended Hi Pass Crossover** **For Full Power Handling	400 Hz** **12db Per Octave Crossover
Frequency Response at -10DB	400 – 6,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	6.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	0.46 l
Excursion (mathematical)***	Xmax	2.50 mm
Free Air Resonance	Fs	387.4 Hz
Mechanical Factor	Qms	23.17
Electrical Factor	Qes	2.80
Total Factor	Qts	2.50
Cone Area	Sd	139 cm²
Mechanical Mass	Mms	9.80 g
Bl Factor	Bl	6.84 Tm
Dc Resistance	Re	5.5 Ohm
Inductance	Le	0.19 mH at 1 kHz
Mechanical Mass Without Air	Mmd	8.87 g
Mechanical Compliance	Cms	0.017 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.58″ ( 167.2mm)
Front Mount Baffle Cutout	5.79″ (147 mm)
Mounting Depth	2.20″ (56 mm)
Overall Depth	3.47″ (62.7 mm)
Net Weight	3.88 Lbs (1.76 kg)
Shipping Weight	4.32 Lbs (1.96 kg)
Carton Dimensions W x L x H	7.09″ x 7.09″ x 3.14″ (180 x 180 x 80 mm)

• A deep midbass response along with a strong vocal response
• Outstanding durability and strong impactful midbass even in small enclosures
• Natural paper cone and double-roll surround for smooth response
• Handles 200 Watts, guaranteeing endurance at loudest volumes
• Impressive choice for high output home, car, and professional audio systems – 8 Ohm impedance also available in 4 Ohm

The 6MB200 v2 now has a more extended midrange response, up to 6.5 kHz giving it clean vocals. A perfect option for mid bass speaker replacements in three-way cabinets. The Perfect speaker for TUKUTEO® sound.

The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment.

Its light weight of only 3.3 Lbs helps to keep your enclosure light, making it perfect for portable audio applications.

PRV Audio 6.5” PRO Audio Midbass 6MB200 Loudspeaker 200 Watts 8 Ohm – Professional Woofer

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.00V at 1m	93.5 dB
Recommended Hi Pass Crossover* *For Full Power Handling	125 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	125 – 6,500 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	12.5 mm
Former Material	Kapton
Magnetic Gap Depth	5.8 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	4.13 l
Excursion (mathematical)***	Xmax	4.80 mm
Free Air Resonance	Fs	123.28 Hz
Mechanical Factor	Qms	20.81
Electrical Factor	Qes	1.20
Total Factor	Qts	1.13
Cone Area	Sd	154 cm²
Mechanical Mass	Mms	11.57 g
Bl Factor	Bl	7.05 Tm
Dc Resistance	Re	6.7 Ohms
Inductance	Le	0.25 mH at 1 kHz
Mechanical Mass Without Air	Mmd	10.55 g
Mechanical Compliance	Cms	0.144 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.53″ (166 mm)
Front Mount Baffle Cutout	5.63″ (143 mm)
Mounting Depth	2.6″ (66 mm)
Overall Depth	2.91″ (74 mm)
Net Weight	3.30 Lbs (1.50 kg)
Shipping Weight	3.62 Lbs (1.64 kg)
Carton Dimensions W x L x H	7.17″ x 7.17″ x 4.13″ (182 x 182 x 105 mm)

• 6.5″ PRO audio Midrange speaker designed for Low Frequencies with shallow profile
• 200 watts RMS program power gives capability of high acoustical output with small amplifier
• Impressive choice for high output home, car, and professional audio systems – 8 Ohm Impedance
• Smooth response through the mid-bass and vocal range at at loudest volumes

To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.

The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.

This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.

PRV 6.5″ Midrange Speaker 6MR200A 200 Watts / 8 Ohm PRO Audio Loudspeaker

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohms
Rated AES Power Handling (RMS)	100 Watts
Program Power	200 Watts
Sensitivity 2.83V at 1m	94 dB
Recommended Hi Pass Crossover* *For Full Power Handling	150 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	155 – 11,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	5.5 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	3.16 l
Excursion (mathematical)***	Xmax	2.62 mm
Free Air Resonance	Fs	114.1 Hz
Mechanical Factor	Qms	13.16
Electrical Factor	Qes	1.28
Total Factor	Qts	1.17
Cone Area	Sd	137 cm²
Mechanical Mass	Mms	10.1 g
Bl Factor	Bl	6.27 Tm
Dc Resistance	Re	5.5 Ohms
Inductance	Le	0.26 mH at 1 kHz
Mechanical Mass Without Air	Mmd	9.02 g
Mechanical Compliance	Cms	0.120 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.59″ (167.5 mm)
Front Mount Baffle Cutout	5.69″ (144.5 mm)
Mounting Depth	2.24″ (57 mm)
Overall Depth	2.5″ (63.5 mm)
Net Weight	3.52 Lbs (1.60 kg)
Shipping Weight	3.79 Lbs (1.75 kg)
Carton Dimensions W x L x H	7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm)

 

• True full-range response ( 80 – 20,000Hz ) makes it easy to add midrange and high frequency to any system
• Impressive choice for a compact, high output home, car, and professional audio systems – 8 Ohm impedance
• 92.5 dB – High efficiency, you do not need a lot of power to achieve extreme SPL levels
• Dual Cone Full Range Loudspeaker – Secondary “whizzer” cone improves high frequency response

The dual cone setup maximizes sound clarity. The primary cone handles lows to midrange frequencies while the smaller whizzer cone increases high-frequency response, yet it still has a wide frequency range, 80Hz to 20,000Hz, despite its small size.

In addition to delivering superior performance across a wide range of frequencies, its innovative design sets it apart from traditional speakers.

These full-range speakers are focused on a combination of a small motor with a copper ring and an unique whizzer cone with a woven-cloth dust cap which provides exceptional clarity, deep mid-bass, high detail, and dynamics at high sensitivity.

Great option for car audio systems and simple portable speaker designs. Whether you’re a DIY audio enthusiast or a professional sound engineer, the FR series is the go-to choice for any audio project that demands exceptional sound quality and clarity all from a single speaker.

PRV Audio 6.5″ Fullrange Speaker 6FR200 PRO Audio Loudspeaker 200 Watts / 8 Ohm

Recommended HPF using PRV Digital Signal Processor DSP when using up to 200 Watts RMS musical power ( without clipping )

• 85 Hz at 12 dB per octave filter Crossover / BT12
• 70 Hz at 18 dB per octave filter Crossover / BT18

We do not recommend using a LPF at low power to take advantage of its high frequency response.

GENERAL SPECIFICATIONS

Nominal Diameter	6″ (152 mm)
Nominal impedance	8 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.83V at 1m	92.5 dB
Recommended Hi Pass Crossover** **For Full Power Handling	85 Hz** **12db Per Octave Crossover
Frequency Response	80 – 20,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	10.0 mm
Former Material	Kapton
Magnetic Gap Depth	6.0 mm
Frame Material	Stamped Steel

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.} 

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	6.93 l
Excursion (mathematical)***	Xmax	3.50 mm
Free Air Resonance	Fs	111.7 Hz
Mechanical Factor	Qms	15.69
Electrical Factor	Qes	1.40
Total Factor	Qts	1.29
Cone Area	Sd	143 cm²
Mechanical Mass	Mms	8.37 g
Bl Factor	Bl	5.17 Tm
Dc Resistance	Re	6.4 Ohms
Inductance	Le	0.264 mH at 1 kHz
Mechanical Mass Without Air	Mmd	7.40 g
Mechanical Compliance	Cms	0.242 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

Overall Diameter	6.55” (166.5 mm)
Front Mount Baffle Cutout	5.73” (145.5 mm)
Mounting Depth	2.81” (71.5 mm)
Overall Depth	3.09” (78.5 mm)
Net Weight	2.78 Lbs (1.27 kg)
Shipping Weight	3.08 Lbs (1.4 kg)
Carton Dimensions W x L x H	6.89” x 6.89” x 3.74” (175 x 175 x 95 mm)

 

The PRV Audio Pro Audio Loudspeaker, 5MR450-NDY-4 midrange woofer offers outstanding durability and a smooth midrange response through 16kHz.

 

This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even the home studio monitors. It is a great option for three way cabinets requiring additional midrange support.

The high end neodymium magnet assembly was chosen to increase sensitivity and power handling. This neodymium is attached to a sturdy reinforced cast aluminum frame to ensure a solid support structure for long lasting play in most any environment. Its light weight of only 2.65 lbs helps keep your enclosures light and is a great use for use for car doors and installers looking for high SPL midrange and upper midrange responses.

 

 

 

• Nominal Impedance: 4 Ohm
• 450 Watts RMS Music Power Handling, with a 94 dB Sensitivity, capable of generating a lot output at wide frequency range!
• Voice Coil Diameter: 1.5″
• Ideal solution for compact full-range applications demanding high acoustic output

GENERAL SPECIFICATIONS

Nominal Diameter	5″ (127 mm)
Nominal Impedance	4 Ohm
Nominal Power Handling	225 Watts
Continuous Program Power (RMS)	450 Watts
Max Peak Power	900 Watts
Sensitivity 2.00V at 1m	94 dB
Recommended Hi Pass Crossover* *For Full Power Handling	290 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	160- 16,000 Hz
Voice Coil Diameter	1.5″ (38.1 mm)
Voice Coil Wire	CCAW
Voice Coil Winding Depth	9.5 mm
Former Material	Kapton
Magnetic Gap Depth	5.8 mm
Frame Material	Die Cast Aluminum

^{*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.}

---

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	1.56 l
Excursion (mathematical)***	Xmax	3.30 mm
Free Air Resonance	Fs	149.5 Hz
Mechanical Factor	Qms	20.74
Electrical Factor	Qes	0.50
Total Factor	Qts	0.49
Cone Area	Sd	95 cm²
Mechanical Mass	Mms	9.14 g
Bl Factor	Bl	7.94 Tm
Dc Resistance	Re	3.7 Ohms
Inductance	Le	0.02 mH at 1 kHz
Mechanical Mass Without Air	Mmd	8.62 g
Mechanical Compliance	Cms	0.123 mm/N

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

---

EXTRA INFO

Overall Diameter	5.79″ (147 mm)
Front Mount Baffle Cutout	4.72″ (120 mm)
Mounting Depth	2.60″ (66 mm)
Overall Depth	2.95″ (75 mm)
Net Weight	2.65 Lbs (1.2 kg)
Shipping Weight	2.85 Lbs (1.3 kg)
Carton Dimensions W x L x H	6.1” x 6.1 x 3.7” (155 x 155 x 95mm)

 

PRV AUDIO 5MR450-NDY-4 DATASHEET

The TPT-MD10 PRO is a very high efficiency 10″ driver for professional midrange speaker applications. It features a 3″ copper voice coil and a low-mass yet stiff cone to help provide clean, detailed and high-impact sound reproduction.

This Italian-Designed 10″ pro PA speaker is built with the finest components available in the pro audio market. Its aluminum demodulation ring in the motor reproduces audio accurately at concert-level volume.

• Capable of handling 1000 Watts
• Impressive 100 dB sensitivity for maximum output
• Large vented ferrite motor for increased output and power handling
• Aluminum demodulating ring allows for a very low distortion output

The TPT-MD10 PRO is a popular 10″ midrange speaker built like a professional loudspeaker, but has been designed for use in the car audio market.

Designated at 8 Ohm impedance to work great with our high power amplifiers, where you can install multiple speakers on a single system amplifier, you can easily wire 8x speakers in parallel to a TPT-8000 at 1 Ohm or 4x speakers into a TPT-3000 at 2 Ohm, and even just 2x speakers into a TPT-1500 4 Ohm.

Taking your custom system to the maximum output level, where you can drive with the windows down and still have your music heard over down on the block.

Specs:
1000 Watts Max Power
400 Watts RMS Power
Impedance: 8 Ohm
Sensitivity: 100 dB
Frequency Response: 80 – 4,000Hz
Voice Coil: 3”
Recommended High Pass Filter with TPT-SP4BT DSP:
140 Hz under 1000 Watts of Amplifier RMS Power with 18dB Slope
125 Hz under 500 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Mounting Depth: 4.45”
Mounting Cutout Diameter: 9.09″
Overall Size: 10.29″ x 10.29″ x 5.06″

This Italian-Designed 12″ pro PA speaker is built with the finest components available in the pro audio market. Its aluminum demodulation ring in the motor reproduces audio accurately at concert-level volume.

• Capable of handling 1000 watt max musical power for tremendous output levels
• Impressive 101 dB sensitivity for maximum output
• Large vented ferrite motor for increased output and power handling
• Aluminum demodulating ring allows for a very low distortion output

The TPT-MD12 PRO is a popular 12″ midrange speaker built like a professional loudspeaker, but has been designed for use in the car audio market.

Designated at 8 Ohm impedance to work great with our high power amplifiers, where you can install multiple speakers on a single system amplifier, you can easily wire 8x speakers in parallel to a TPT-8000 at 1 Ohm or 4x speakers into a TPT-3000 at 2 Ohm, and even just 2x speakers into a TPT-1500 4 Ohm.

Taking your custom system to the maximum output level, where you can drive with the windows down and still have your music heard over down on the block.

Specs:
1000 Watts Max Power
400 Watts RMS Power
Impedance: 8 Ohm
Sensitivity: 101 dB
Frequency Response: 55 – 4,000Hz
Voice Coil: 3”
Aluminum Basket with High Strength Ferrite Magnet
Recommended High Pass Filter with TPT-SP4BT DSP:
140 Hz under 1000 Watts of Amplifier RMS Power with 18dB Slope
125 Hz under 500 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Mounting depth: 4.77”
Mounting Cutout Diameter: 11.20”
Overall Diameter: 12.40”
Weight: 16 Lbs

Timpano’s TPT-MD12 is a midbass loudspeaker designed for use in sealed enclosures, but would also work well in any system where high efficiency or high output is the goal. This driver has been painstakingly voiced to create a natural tone with low distortion at high levels.

• 800 watt max musical power handling for tremendous output levels
• Designed to work great in sealed and vented enclosures
• 97 dB sensitivity – Smooth response through the mid-bass and vocal range

The TPT-MD12 is a popular 12″ midbass speaker built like a professional midbass, but has been designed for use in the car audio market.

Designated at 8 Ohm impedance to work great with our high power amplifiers, where you can install multiple speakers on a single system amplifier, you can easily wire 8x speakers in parallel to a TPT-5000 at 1 Ohm or 4x speaker into a TPT-2200 at 2 Ohm. Taking your custom system to the maximum output level, where you can drive with the windows down and still have your music heard over down on the block.
Specs:
800 Watts Max Power
375 Watts RMS Power
Impedance: 8 Ohm
Sensitivity: 97 dB
Frequency Response: 55- 5000Hz
Voice Coil: 2.5”
Steel Basket with High Strength Ferrite Magnet
Recommended High Pass Filter with TPT-SP4BT DSP:
125 Hz under 500 Watts of Amplifier RMS Power with 18dB Slope
120 Hz under 375 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Mounting depth: 5.10”
Mounting Cutout Diameter: 11.06”
Overall Diameter: 12.20”
Weight: 10.80 Lbs

Timpano’s TPT-MD10 is a midbass loudspeaker designed for use in sealed enclosures, but would also work well in any system where high efficiency or high output is the goal. This driver has been painstakingly voiced to create a natural tone with low distortion at high levels.

When looking for a pro audio midbass speaker, the MD series is the obvious choice; combining power, sound clarity, and reliability.

Excellent for midbass, vocal reproduction, and musical instrument applications, the TPT-MD10 10″ speaker has the power and reliability to cope with any pro sound demand.

• 800 watt max musical power handling for tremendous output levels
• Designed to work great in sealed and vented enclosures
• 97 dB sensitivity – Smooth response through the mid-bass and vocal range

The TPT-MD10 is a popular 10″ midbass speaker built like a professional midbass, but has been designed for use in the car audio market.

Designated at 8 Ohm impedance to work great with our high power amplifiers, where you can install multiple speakers on a single system amplifier, you can easily wire 8x speakers in parallel to a TPT-5000 at 1 Ohm or 4x speaker into a TPT-2200 at 2 Ohm. Taking your custom system to the maximum output level, where you can drive with the windows down and still have your music heard over down on the block.

Specs:
800 Watts Max Power
375 Watts RMS Power
Impedance: 8 Ohm
Sensitivity: 97 dB
Frequency Response: 75- 5,500Hz
Voice Coil: 2.5”
Steel Basket with High Strength Ferrite Magnet
Recommended High Pass Filter with TPT-SP4BT DSP:

125 Hz under 500 Watts of Amplifier RMS Power with 18dB Slope
120 Hz under 375 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Mounting depth: 4.36”
Mounting Cutout Diameter: 9.25”
Overall Diameter: 10.14”
Weight: 10.49 Lbs

The MD series is our premium PRO Audio loudspeaker line, built as a professional midrange; combining high power handling, great sound output, and reliability. This 8″ mid range speaker is designed to provide the best performance to price value in the industry, Standing out as a great value for professional speakers, high output live sound systems, and custom car audio doors and trunk systems.

• POWER YOU CAN RELY ON: Can handle up to 700 Watts Max power and continuous 230 Watts RMS, able to deliver tremendous amount of sound output
• LATEST TECHNOLOGY: High efficiency voice coil allows, more output and high-impact sound
• GREAT FOR: Custom sound systems designed for high output with high power amplifiers – 3-Way systems ( Subwoofer, Speaker & Tweeter )
• QUALITY YOU CAN TRUST: Wide Frequency Response of 110 – 8,500 Hz provides the cleanest and most detailed vocal and sound reproduction.

Designated at 8 Ohm impedance to work great with our high power amplifiers, where you can install multiple speakers on a single system amplifier, you can easily wire 8x speakers in parallel to a TPT-3000 at 1ohm. Taking your custom system to the maximum output level, where you can drive with the windows down and still have your music heard over down on the block.

View details – TPT-3000 1 Ohm

View details – TPT-1500 1 Ohm

With this collection of reliable component parts, a high-temperature voice coil, and a high-strength motor, we believe we have found the sweet spot in terms of pricing and specifications in the pro audio industry. We bring to you a suitable option to upgrade your system to a high level of performance and SPL output at a reasonable price.

Specs:
700 Watts Continuous Power
230 Watts RMS Power
Impedance: 8 Ohm
Sensitivity: 95 dB
Frequency Response: 110 – 8,500 Hz
Voice Coil: 1.5″
Steel Basket with High Strength Ferrite Magnet
Recommended High Pass Filter with TPT-SP4BT DSP:
145 Hz under 350 Watts of Amplifier RMS Power with 18dB Slope
130 Hz under 230 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Mounting depth: 3.52″
Mounting Cutout Diameter: 7.12″
Overall Diameter: 8.22″
Weight: 4.85 Lbs

The MD series is our premium PRO Audio loudspeaker line, built as a professional midrange; combining high power handling, great sound output, and reliability. This 6.5′′ mid range speaker is designed to provide the best performance to price value in the industry, standing out as a great value for professional, high output live sound systems and car audio applications.

• POWER YOU CAN RELY ON: Can handle up to 600 Watts Max power and continuous 200 Watts RMS, able to deliver tremendous amount of sound output
• GREAT FOR: Custom sound systems designed for high output with high power amplifiers – 3-Way systems ( Subwoofer, Speaker & Tweeter )
• QUALITY YOU CAN TRUST: Wide Frequency Response of 145 – 9,000 Hz provides the cleanest and most detailed vocal and sound reproduction.
• LATEST TECHNOLOGY: High efficiency allows, more output and high-impact sound

Designated at 8 Ohm impedance to work great with our high power amplifiers, where you can install multiple speakers on a single system amplifier, you can easily wire 8x speakers in parallel to a TPT-3000 at 1ohm. Taking your custom system to the maximum output level, where you can drive with the windows down and still have your music heard over down on the block.

With this collection of reliable parts, a high-temperature voice coil, and a high-strength motor, we believe we have found the sweet spot in terms of pricing and specifications in the pro audio industry. We bring to you a suitable option to upgrade your system to a high level of performance and SPL output at a reasonable price.

Specs:
600 Watts Max Power
200 Watts RMS Power
Impedance: 8 Ohm
Sensitivity: 95 dB
Frequency Response: 145 – 9,000 Hz
Voice Coil: 1.5″
Steel Basket with High Strength Ferrite Magnet
Recommended High Pass Filter with TPT-SP4BT DSP:
160 Hz under 300 Watts of Amplifier RMS Power with 18dB Slope
140 Hz under 200 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Mounting depth: 2.60″
Mounting Cutout Diameter: 5.75″
Overall Diameter: 6.61″
Weight: 4.19 Lbs

MOTOR

HORN SPECIFICATIONS

MEASUREMENT

MOTOR

HORN SPECIFICATIONS

MEASUREMENT