Description
Product Overview
The PRV Audio FR Series sets a new standard of value in high-performance Fullrange speakers. The 6FR200 fullrange speaker is an excellent choice when space is at an absolute minimum, eliminating the need for a tweeter.
The dual cone setup maximizes sound clarity. The primary cone handles lows to midrange frequencies while the smaller whizzer cone increases high-frequency response, yet it still has a wide frequency range, 80Hz to 20,000Hz, despite its small size.
In addition to delivering superior performance across a wide range of frequencies, its innovative design sets it apart from traditional speakers.
These full-range speakers are focused on a combination of a small motor with a copper ring and an unique whizzer cone with a woven-cloth dust cap which provides exceptional clarity, deep mid-bass, high detail, and dynamics at high sensitivity.
Great option for car audio systems and simple portable speaker designs. Whether you’re a DIY audio enthusiast or a professional sound engineer, the FR series is the go-to choice for any audio project that demands exceptional sound quality and clarity all from a single speaker.
PRV Audio 6.5″ Fullrange Speaker 6FR200 PRO Audio Loudspeaker 200 Watts / 8 Ohm
Recommended HPF using PRV Digital Signal Processor DSP when using up to 200 Watts RMS musical power ( without clipping )
We do not recommend using a LPF at low power to take advantage of its high frequency response.
GENERAL SPECIFICATIONS
*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.
THIELE-SMALL PARAMETERS
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4
EXTRA INFO
Technical Data
| Specification | Details |
|---|---|
| Size | 6.5 inch |
| RMS Power | 200 Watts RMS |
| Impedance | 8 Ohms |
| Sensitivity | 12 dB |
| Frequency Response | 80 – 20,000 Hz |
| Nominal Diameter | 6″ (152 mm) |
| Nominal impedance | 8 Ohm |
| Nominal Power Handling | 100 Watts |
| Continuous Program Power (RMS) | 200 Watts |
| Max Peak Power | 400 Watts |
| Sensitivity 2.83V at 1m | 92.5 dB |
| Recommended Hi Pass Crossover** **For Full Power Handling | 85 Hz** **12db Per Octave Crossover |
| Voice Coil Diameter | 1.5″ (38 mm) |
| Voice Coil Wire | CCAW |
| Voice Coil Winding Depth | 10.0 mm |
| Former Material | Kapton |
| Magnetic Gap Depth | 6.0 mm |
| Frame Material | Stamped Steel |















