PRV 2 inch 4 Ohm Pro Audio Super Tweeter PAIR PRV-Tw350ti-4

$27.91

SKU: PRV-Tw350ti-4 Categories: , , Tags: , , Brand:

Description

Product Overview

Add crystal clear sparkle to any speaker with PRV Audio’s TW350Ti-4 titanium bullet super tweeters! Not only do these tweeters look as good as it sounds, it can also take a lot of power from its 1″ diameter copper-clad voice coil attached to a titanium diaphragm that is lightweight and rigid, for maximum efficiency and smooth high frequencies.

These tweeters also feature a precise dispersion pattern, giving you a wide soundstage and accurate imaging. With the TW350Ti-4 tweeters, you get beautiful, crystal clear sound that will make your music shine.

A square faceplate makes it easier to install, and the black face is framed by a strong aluminum horn, which offers a smooth response and extremely high efficiency, enabling it to cover a wide frequency range and offer a smooth response.

PRV Compact Car Audio Bullet Tweeters TW350TI-4 240 Watts 4 Ohm 3×3”- Easy to Mount Tweeters (Pair)

GENERAL SPECIFICATIONS

*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.

EXTRA INFO

Technical Data
Specification Details
Size 2 inch
Impedance 4 Ohms
Sensitivity 12 dB
Nominal impedance 4 Ohm
Nominal Power Handling* 60 Watts
Continuous Program Power(RMS)** 120 Watts
Max Peak Power*** 240 Watts
Sensitivity 2.00V at 1m 105 dB
Recommended Hi Pass Crossover For Full Power Handling 5000 Hz 12db Per Octave Crossover
Frequency Response at -10dB 4,500 – 20,000 Hz
Voice Coil Diameter 1.0” (25 mm)
Voice Coil Wire CCAW
Voice Coil Former Material Kapton
Diaphragm Material Titanium
Flux Density 1.30 T
Magnet Material Ferrite

Additional information

Weight 6 lbs