PRV 2 inch 4 Ohm Pro Audio Super Tweeter PAIR PRV-Tw350ti-4
$27.91
The details
Product Overview
Add crystal clear sparkle to any speaker with PRV Audio’s TW350Ti-4 titanium bullet super tweeters! Not only do these tweeters look as good as it sounds, it can also take a lot of power from its 1″ diameter copper-clad voice coil attached to a titanium diaphragm that is lightweight and rigid, for maximum efficiency and smooth high frequencies.
These tweeters also feature a precise dispersion pattern, giving you a wide soundstage and accurate imaging. With the TW350Ti-4 tweeters, you get beautiful, crystal clear sound that will make your music shine.
A square faceplate makes it easier to install, and the black face is framed by a strong aluminum horn, which offers a smooth response and extremely high efficiency, enabling it to cover a wide frequency range and offer a smooth response.
PRV Compact Car Audio Bullet Tweeters TW350TI-4 240 Watts 4 Ohm 3×3”- Easy to Mount Tweeters (Pair)
GENERAL SPECIFICATIONS
*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.
EXTRA INFO
By the numbers
- Impedance
- 4 Ohms
- Nominal impedance
- 4 Ohm
- Nominal Power Handling*
- 60 Watts
- Continuous Program Power(RMS)**
- 120 Watts
- Max Peak Power***
- 240 Watts
- Recommended Hi Pass Crossover For Full Power Handling
- 5000 Hz 12db Per Octave Crossover
- Sensitivity
- 12 dB
- Sensitivity 2.00V at 1m
- 105 dB
- Frequency Response at -10dB
- 4,500 – 20,000 Hz
- Voice Coil Diameter
- 1.0” (25 mm)
- Voice Coil Wire
- CCAW
- Voice Coil Former Material
- Kapton
- Diaphragm Material
- Titanium
- Magnet Material
- Ferrite
- Size
- 2 inch
- Weight
- 6 lbs
- Flux Density
- 1.30 T

























