New DS18 gear in stock: SMD-8500.1D amp + NXL-IQ8 marine speakers Shop now
Lease-to-own financing available at checkout Learn more
Real support Mon to Sat, 8AM to 6PM EST Get help
Shop by brand

19 brands

See all brands
PRV

PRV 6.5 inch 4 Ohm ALTO Mid Range Speaker PRV-6MR200A-4

$26.91

RMS Power200W
Peak Power400W
Sensitivity12dB
SKU: PRV-6MR200A-4 Categories: , , , Tags: , , Brand:
01 Overview

The details

Product Overview

PRV Audio’s ALTO Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is used to smooth frequency response and to keep the moving mass low, increasing the efficiency. The 6MR200A-4 midrange speaker is our solution for PROAudioOnWheels® for Car audio systems.

To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.

The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.

This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.

PRV 6.5″ Midrange Car Speaker 6MR200A-4 200 Watts / 4 Ohm PRO Loudspeaker

GENERAL SPECIFICATIONS

*Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to provide a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker.

THIELE-SMALL PARAMETERS

***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4

EXTRA INFO

02 Tech specs

By the numbers

PRV-6MR200A-4 · Manufacturer rated
RMS Power 01
200W
Continuous rating
Peak Power 02
400W
Short-burst rating
Sensitivity 03
12dB
Efficiency
Size 04
6.5in
Nominal

Impedance
4 Ohms
Nominal impedance
4 Ohm
Nominal Power Handling
100 Watts
Continuous Program Power (RMS)
200 Watts
Max Peak Power
400 Watts
Recommended Hi Pass Crossover* *For Full Power Handling
150 Hz** ** 12db Per Octave Crossover

Sensitivity
12 dB
Sensitivity 2.00V at 1m
94 dB
Frequency Response at -10dB
155 – 11,000 Hz

Voice Coil Diameter
1.5″ (38 mm)
Voice Coil Wire
Copper
Voice Coil Winding Depth
8.0 mm
Former Material
Kapton
Magnetic Gap Depth
5.5 mm
Frame Material
Stamped Steel

Size
6.5 inch
Nominal Diameter
6.5″ (165 mm)
Weight
5.5 lbs
03 Complete the build

Power it right

Shop all