Description
Product Overview
Engineered to deliver tight, impactful midbass and articulate low-mid frequencies, the Beyma 10CMV2 is a versatile 10-inch pro-audio driver built for compact enclosures, high-output front stages, and multi-driver pro setups.
Rated for 250 Watts AES power (500 Watts Program), the 10CMV2 pairs a high-flux ferrite motor assembly with a treated double-roll cloth surround and a rigid paper cone. With an extended 6.5 mm linear excursion and 30 mm peak-to-peak mechanical limit, it delivers punchy, low-distortion midbass that seamlessly transitions into crisp lower-midrange response.
Key Features
- Balanced Midbass & Low-Mid OutputOptimally tuned frequency coverage from 60 Hz to 5,000 Hz, bridging the gap between subwoofers and high-frequency horns.
- 6.5 mm Linear ExcursionHigh displacement capability for a 10-inch driver, providing deep, controlled low-end impact without bottoming out.
- High-Efficiency DesignGenerates 95 dB sensitivity to make the most of every watt supplied by your amplifier.
- Treated Double-Roll Cloth SurroundKeeps cone motion linear during high excursion while resisting environmental wear and fatigue.
- Shallow 4.5″ Mounting DepthCompact chassis depth makes it easier to fit into tight baffles, pro-audio enclosures, and custom panels.
Technical Data
| Specification | Details |
|---|---|
| Size | 4.5 inch |
| Sensitivity | 95 dB |
| Frequency Response | 60 Hz – 5,000 Hz |
| Mounting Depth | 4.5 Inches (115 mm) |
| Nominal Diameter | 10 Inches (250 mm) |
| Nominal Impedance | 8 Ohms |
| AES Power Handling | 250 Watts |
| Program Power Handling | 500 Watts |
| Sensitivity (1W / 1m) | 95 dB |
| Voice Coil Diameter | 1.5 Inches (38.1 mm) |
| Linear Excursion | 6.5 mm |
| Resonant Frequency | 52 Hz |
| Overall Diameter | 10.2 Inches (258 mm) |
| Baffle Cutout Diameter | 9.1 Inches (230 mm) |
| Net Weight | 6.8 lbs (3.1 kg) |
Fitment & Applications
- Custom Pro-Audio Door Panels & EnclosuresExcellent primary midbass driver for multi-speaker front stages and chuchero boxes.
- Pro Sound & Live AudioHigh-output midbass/midrange driver for compact vented 2-way PA cabinets and monitor wedges.
- Bass Guitar & Instrument EnclosuresHigh-efficiency driver for compact bass cabinets needing articulate note definition.
Tuning TipEnclosure & Tuning Recommendation: For peak output and clean bass extension, install in small vented/ported enclosures (recommended volume around 1.05 cu. ft. / 30 liters tuned to 54 Hz). Set your active high-pass filter (HPF) around 60 Hz – 80 Hz with a 12 dB or 24 dB/octave slope for optimal power handling.
