The details
Product Overview
Why we stock the DS18 SB10A
The DS18 SB10A is a loaded, amplified shallow enclosure with a 10″ sub and a built-in digital amp rated 350 watts RMS. The sealed 0.42 cubic foot MDF box plays from 38Hz to 250Hz.
It’s a drop-in bass upgrade with no separate amp to wire. Want a 12? Use the SB12A. Smaller space? See the SQBASS8.
Subwoofers are a must have for any audio system. Some audio enthusiasts don’t have a lot of room for big subs, for example, in single cab trucks. Now we have a option for people craving great bass but don’t have much space for it.
The SB10A is a slim 10 inch subwoofer in a sealed box that is powered by a powerful, built in 350w RMS amplifier that is sure to get the bass thumping hard in the minimal space that you have available available in your vehicle.
Highlights
Technical Details Download SB10A Product Manual
By the numbers
- Amplifier Class
- Digital
- RMS Power
- 350 Watts RMS
- Speaker Size
- 10″ / 261mm
- Total Impedance
- 2 ohms
- RMS Power Handling
- 350W
- MAX Power Handling
- 700W
- Number of Channels
- 1 CH
- Minimum Impedance
- 2 ohms
- Low Level Input Range
- 0.1-0.6 V
- High Level Input Range
- Yes
- Selectable X-Over RMS a 2 OHMS
- LPF Fixed
- X-Over Filter Range
- 50 – 200 Hz
- Bass Boost Range
- 0-6 dB
- Power Input Terminal Size
- 8 GA
- Fuse Size
- 30 A
- DC Output Protection
- Yes
- Short Circuit Output Protection
- Yes
- Voltage Input Protection
- Yes / Si (16v)
- Frequency Response
- 38Hz-250Hz
- Sensitivity (1w/1m)
- 83dB
- Efficiency @ 4 ohms
- 75%
- Bass Boost Frequency
- 50 Hz
- Box Material
- 0.59″ MDF
- Finish Material
- Non-Woven fabric
- Voice Coil Diameter
- 1.5″ / 38.6mm
- Voice Coil Former Material
- Aluminum
- Winding Material
- EISV
- Cone Material
- IPP
- Surround Material
- Rubber
- Basket Material
- SPCC
- Magnet Material
- Ferrite
- Magnet Weight
- 40 Oz
- Size
- 10 inch
- Internal Volume
- 12L / 0.42ft3
- Box Type
- Sealed Box
- Height
- 13.6″ / 345.4mm
- Width
- 16.7″ / 424mm
- Depth 1
- 4.82″ / 122.6mm
- Depth 2
- 7.9″ / 201mm
- Load Configuration
- Parallel In
- (-3bB) Dropping Point
- 48Hz
- Amplifier Type
- Monoblock Subwoofer
- Signal to Noise Ratio
- 75 dB
- Total Harmonic Distortion (T.H.D)
- 0.30%
- Phase Selector
- 0-180°
- Led Indicator
- Power – Protection
- Remote Level Control
- Yes
- Thermal Protection
- Yes (75°C / 167°F)
- Over-Load Protection
- Yes
Reviews (0)
You must be logged in to post a review.
Power it right
Related products
- 50% off
SoundQubedSoundQubed Bagger Series BG4-700 Ultra Compact Amplifier 700W SQ-BG4-700
Original price was: $399.95.$199.97Current price is: $199.97.Add to cart -
SoundQubedSoundQubed Q Series Q1-8000 Monoblock Amplifier 8000W SQ-Q1-8000
$1,899.95Add to cart -
SoundQubedSoundQubed HDX Series 3 inch Neodymium Compression Super Bullet Tweeter SQ-HDX-PT1N
$54.95Add to cart -
SoundQubedSoundQubed HDS Series 3.8 inch Q-Shaped Pro Audio Tweeter SQ-HDS-PAT1
$49.95Add to cart
Reviews
There are no reviews yet.