DS18
DS18 PROJECT360.698N 6×9 inch Neodymium Mid-High Loudspeaker with Rotating Recone Design 8 Ohm
$249.95
Lease for as low as $11.3/week. Apply Now
The DS18 PROJECT360 6×9" 8-ohm mid-high loudspeaker is built for loud, clear vocals in pro audio and SPL builds.
- Nominal Diameter: 6×9" / 152x228mm
- RMS Power Handling: 350 W
- MAX Power Handling: 700 W
- Nominal Impedance: 8 Ohms
- Frequency Response: 95Hz–17kHz
- Sensitivity (1w/1m): 101 dB
RMS Power350W
Peak Power700W
Sensitivity101dB
01 Overview
The details
Product Overview
The DS18 PROJECT360 6×9" 8-ohm mid-high loudspeaker is built for loud, clear vocals in pro audio and SPL builds. It uses a lightweight neodymium magnet for higher output and efficiency, and the PROJECT360 rotating recone design lets you swap the cone assembly in minutes instead of replacing the whole speaker.
- Patent-Pending Rotating Recone Design
- Crystal-Clear Highs
- Competition-Level Output
- No Glue. No Downtime
- High Power Handling
- High-Efficiency Design
02 Tech specs
By the numbers
RMS Power 01
350W
Continuous rating
Peak Power 02
700W
Short-burst rating
Sensitivity 03
101dB
Efficiency
Size 04
6
Nominal
- Nominal Impedance
- 8 Ohms
- RMS Power Handling
- 350 W
- MAX Power Handling
- 700 W
- Recommended High-Pass Crossover
- 90 Hz
- Speaker Terminals
- Spade
- Sensitivity (1w/1m)
- 101 dB
- Frequency Response
- 95Hz–17kHz
- Excursion (one way)
- 0.85 mm
- Free Air Resonance
- 168 Hz
- BL Factor
- 16.280
- Cone Shape
- Curvilinear
- Voice Coil Diameter
- 1.75" / 44.5mm
- Voice Coil Former Material
- Kapton
- Winding Material
- CCAW
- Cone Material
- Paper
- Dust Cap Material
- Paper
- Surround Material
- Cloth
- Spider Diameter
- 4" / 102mm
- Basket Material
- Aluminum
- Basket Color / Finish
- Black
- Magnet Material
- Neodymium
- Magnet Weight
- 12.8 oz
- Voice Coil Inductance
- 0.016 mH
- Cone Area
- 232.35 cm2
- Motor Diameter
- 3.94" / 100mm
- Nominal Diameter
- 6×9" / 152x228mm
- Equivalent Volume
- 3.34L / 0.117ft3
- Overall Diameter
- 6.57×9.45" / 167x240mm
- Overall Depth
- 3.59" / 91.2mm
- Front Mount Baffle Cutout
- 5.9×8.8" / 150x223mm
- Mounting Depth
- 3" / 77.3mm
- Sold As
- Single Unit
- Grill Included
- No
- Demodulating Rings
- Yes
- Improved Heat Dissipation
- Yes
- Leads Connection Type
- Round Crossed
- Mechanical Factor
- 3.243
- Electrical Factor
- 0.321
- Total Factor
- 0.301
- Moving Mass
- 19.536 g
- Mechanical Compliance
- 0.052 mm/N
- DC Resistance
- 5.2 Ohms
03 Reviews (0)
Reviews (0)
You must be logged in to post a review.
04 Complete the build
Shop all Power it right
Related products
-
SoundQubedSoundQubed HDS2.2 Series 15 inch Subwoofer SQ-HDS2.215
$269.95Select options This product has multiple variants. The options may be chosen on the product page -
SoundQubedSoundQubed HDX Series 6.5 inch Subwoofer SQ-HDX65
$149.95Select options This product has multiple variants. The options may be chosen on the product page -
SoundQubedSoundQubed HDS2.2 Series 10 inch Subwoofer SQ-HDS2.210
$219.95Select options This product has multiple variants. The options may be chosen on the product page -
SoundQubedSoundQubed F Series F4-4400 4 Channel Full Bridge Amplifier 4400W SQ-F4-4400
$499.95Add to cart
Reviews
There are no reviews yet.