Black Friday Month: deals drop all November. Don't sleep on them! Shop deals
New DS18 gear in stock: SMD-8500.1D amp + NXL-IQ8 marine speakers Shop now
Lease-to-own financing available at checkout See financing options
Real support Mon to Sat, 8AM to 6PM EST Get help
Shop by brand

20 brands

See all brands
All Articles

Alternator Whine in Car Audio: How to Find and Fix It

3 min read

Alternator whine is that high-pitched noise that rises and falls with your engine speed, and it ruins an otherwise good car audio system.

What Causes Alternator Whine?

The alternator makes electrical noise as it charges the battery. Most of the time that noise stays in the power system. When it sneaks into your audio signal, the speakers play it as a whine.

The usual cause is a ground problem or a signal cable picking up noise. You can read more about the classic cause in this overview of a ground loop.

How to Tell It Is Alternator Whine

Rev the engine with the stereo on and no music playing. If the pitch goes up with the revs, it’s alternator whine. If it stays steady no matter the engine speed, you’re probably chasing a different noise.

Next, switch the head unit to a source with no signal. If the whine disappears, the noise is coming in through the source. If it stays, it’s probably coming from your amps or wiring.

Alternator Whine Fixes in Order

StepWhat to checkWhy
1Amp and head unit groundsBad grounds are the most common cause
2RCA cable routingSignal cables pick up noise from power wire
3Amp gain settingHigh gain boosts noise along with music
4RCA cable qualityPoorly shielded cables let noise in
5Ground loop isolatorLast resort for stubborn noise
Alternator whine car audio fix checklist from grounds to ground loop isolator
Alternator whine: work through the fixes in this order.

Start With the Grounds

Every ground should go to bare, clean metal on the chassis, with a short cable. Sand off paint and rust, then bolt it down tight. If you have more than one amp, ground them at the same area when you can.

If your head unit shares a ground with something noisy, move it. A weak ground can turn the engine’s electrical noise into whine. A solid electrical system helps too, which is why our guide on the big 3 upgrade is worth a look.

Fix the Cable Routing

Run power wire down one side of the car and RCA cables down the other. When they have to cross, cross them at a right angle. Running them side by side lets noise jump from the power wire into the signal cable.

Good shielded RCA cables help a lot. Cheap ones are the second most common source of whine after bad grounds.

Check the Gain and the Source

If gains are cranked up, the amp boosts the noise along with the music. Set them properly and the whine often drops. The same gentle approach applies to a new sub, which we cover in our post on subwoofer break in.

Alternator Whine Mistakes to Avoid

The first mistake is jumping straight to a noise filter. Filters can hide a problem and often reduce sound quality. The next is replacing the alternator before checking the grounds. A new alternator rarely fixes a wiring issue.

Also, check that the RCA cables are fully seated. A loose plug can cause noise that looks a lot like whine.

Alternator Whine FAQ

Why does my stereo whine when I rev the engine?

Electrical noise from the alternator is getting into the audio path, usually from a bad ground or RCA cables near the power wire.

Will a ground loop isolator fix alternator whine?

Sometimes. It’s best used after you’ve fixed the grounds and cable routing, since it can affect sound quality.

Can a bad alternator cause whine?

Yes, a failing alternator can make more noise, but check grounds and wiring first.

Do better RCA cables stop whine?

They can help if your current ones are poorly shielded. Routing matters just as much as quality.

Need Parts?

For RCA cables, ground cable and wiring kits, browse dv8shop.com or send us a message.

Dv8 blogs

Keep reading