DS18 SLG-RSUB10LD Polaris Slingshot Rear Subwoofer Enclosure Loaded with NXL-10SUB and RGB LED
$779.95
Lease for as low as $35.25/week. Apply Now
Feel the bass in your Polaris Slingshot with DS18’s SLG-RSUB10LD : a subwoofer enclosure installed in the Rear Storage Compartment behind Polaris Slingshot seats!
- Total Impedance: 4 Ohms
- Frequency Response: 35-250Hz
- Sensitivity (1w/1m): 89dB
The details
Product Overview
Feel the bass in your Polaris Slingshot with DS18’s SLG-RSUB10LD : a subwoofer enclosure installed in the Rear Storage Compartment behind Polaris Slingshot seats!
Adding this durable 10” Subwoofer Enclosure into your Polaris Slingshot’s sound system will instantly increase the quality and feel of the bass response it reproduces.
Fitted perfectly for rear storage compartments in all Polaris Slingshot models, when combined with all enclosures in our SLG series, the SLG-RSUB10LD reinforces an impenetrable soundstage designed to cut through the noise of the open road!
The high powered NXL-10SUB was built to bring the bass on your Slingshot to life. Designed with an IP65 marine-grade frame, this 10-inch subwoofer is guaranteed to deliver hard-hitting bass that will stand up to the elements. Plus, its UV compliant cone and butyl rubber surround make it stable enough to withstand the open air design of the Slingshot. Not only does the NXL-10SUB bring the BOOM with its 300 watts RMS and 600 watts max power handling and 4-Ohm impedance, it also features integrated RGB lights that can be connected to any RGB 4-wire circuit for a customizable ambiance that will match your mood or color scheme.
(LED-BTC recommended) Install this subwoofer enclosure into your Polaris Slingshot’s sound system seamlessly through use of the factory bolts and mounting location.
Upgrade your sound system today with DS18’s SLG-RSUB10LD and experience the ultimate in subwoofer performance.
Great For Technical Details Download SLG-RSUB10LD Product Manual
By the numbers
- Speaker Size
- 10" / 254mm
- Total Impedance
- 4 Ohms
- Total RMS Power Handling
- 300W
- Total MAX Power Handling
- 600W
- Recommended Lo Pass Crossover
- 100Hz
- Sensitivity (1w/1m)
- 89dB
- Frequency Response
- 35-250Hz
- Voice Coil Diameter
- 2" / 50.8mm
- Voice Coil Former Material
- Glass fiber
- Winding Material
- CCAW
- Cone Material
- Injection Molded Polypropylene + UV Compliant
- Dust Cap Material
- PPI
- Surround Material
- Butyl (Rubber)
- Basket Material
- High Temp Injection Molded Composite (ASA) with UV Protection coating
- Magnet Material
- Ferrite
- Magnet Weight
- 72oz
- Box Material
- Polyethylene (PE)
- Finish Material
- Black
- Color
- Black
- Internal Volume
- 0.75 ft3 / 21L
- Box Type
- Ported / Vented
- Port Tuned (Fb)
- 40Hz
- Overall Height
- 18.78" / 477mm
- Overall Width
- 15.25" / 388mm
- Overall Depth
- 14.31" / 363.3mm
- Load Configuration
- Single
- -3Db Dropping Point (F3)
- 45Hz
- UV Protection
- Yes
- Waterproof Rating
- IP65
Reviews (0)
You must be logged in to post a review.
Power it right
Related products
-
Trinity Audio SolutionsTrinity Audio Solutions 18 inch M Series 2000W RMS Subwoofer TAS-M18
$639.99Select options This product has multiple variants. The options may be chosen on the product page -
Trinity Audio SolutionsTrinity Audio Solutions TAS-700.4 4 Channel Car Amplifier 700W RMS TAS-700-4
$259.99Add to cart -
Trinity Audio SolutionsTrinity Audio Solutions 12 inch E Series 800w RMS D2/D4 TAS-E12
$184.99Select options This product has multiple variants. The options may be chosen on the product page -
Trinity Audio SolutionsTrinity Audio Solutions 12 inch B Series 1500w RMS D2/D4 TAS-B12
$304.99Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.